Fabrication of Nano/Ultra-Fine Grained IF Steel via SPD Processes: a Review
Published 2014 View Full Article
- Home
- Publications
- Publication Search
- Publication Details
Title
Fabrication of Nano/Ultra-Fine Grained IF Steel via SPD Processes: a Review
Authors
Keywords
IF steel, Nano/ultra-fine grained, Severe plastic deformation
Journal
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
Volume 67, Issue 6, Pages 787-802
Publisher
Springer Nature
Online
2014-05-03
DOI
10.1007/s12666-014-0404-9
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- Bulk forming of sheet metal
- (2012) M. Merklein et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- High-cycle fatigue behavior of severe plastically deformed binary Zn–60Al alloy by equal-channel angular extrusion
- (2012) Murat Aydın JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- The influence of TiO2 nano-particles on bond strength of cold roll bonded aluminum strips
- (2012) Mohammad Ali Soltani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Textural evolution of nanostructured AA5083 produced by ARB
- (2012) Mohammad Reza Toroghinejad et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High Strength and High Ductility of Ultrafine-Grained, Interstitial-Free Steel Produced by ECAE and Annealing
- (2012) Gencaga Purcek et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Application of EBSD technique to ultrafine grained and nanostructured materials processed by severe plastic deformation: Sample preparation, parameters optimization and analysis
- (2012) Yong-jun CHEN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Advances in top–down and bottom–up surface nanofabrication: Techniques, applications & future prospects
- (2011) Abhijit Biswas et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Grain size effect on the strengthening behavior of aluminum-based composites containing multi-walled carbon nanotubes
- (2011) H.J. Choi et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Corrosion behaviour of nanocrystalline 304 stainless steel prepared by equal channel angular pressing
- (2011) Z.J. Zheng et al. CORROSION SCIENCE
- Nanostructured MgH2 prepared by cold rolling and cold forging
- (2011) D.R. Leiva et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Comparison of the Microstructure and Mechanical Properties of As-Cast A356/SiC MMC Processed by ARB and CAR Methods
- (2011) Roohollah Jamaati et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Role of severe plastic deformation on the formation of nanograins and nano-sized precipitates in Fe–Ni–Mn steel
- (2011) M. Nili Ahmadabadi et al. MATERIALS & DESIGN
- Investigation of nanostructured Al/Al2O3 composite produced by accumulative roll bonding process
- (2011) Roohollah Jamaati et al. MATERIALS & DESIGN
- Nano/Ultrafine Structured AA1100 by ARB Process
- (2011) Mohammad Raei et al. MATERIALS AND MANUFACTURING PROCESSES
- CAR process: A technique for significant enhancement of as-cast MMC properties
- (2011) Roohollah Jamaati et al. MATERIALS CHARACTERIZATION
- Refining efficiency and capability of top-down synthesis of nanocrystalline materials
- (2011) Yuwei Xun et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Bake hardening of nanograin AA7075 aluminum alloy
- (2011) Kamran Dehghani MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strain hardening and softening in a nanocrystalline Ni–Fe alloy induced by severe plastic deformation
- (2011) S. Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strain softening in nanocrystalline Ni–Fe alloy induced by large HPT revolutions
- (2011) S. Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Equal-channel angular sheet extrusion of interstitial-free (IF) steel: Microstructural evolution and mechanical properties
- (2011) O. Saray et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Annealing behaviour and mechanical properties of severely deformed interstitial free steel
- (2011) Azdiar A. Gazder et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Texture development in Al/Al2O3 MMCs produced by anodizing and ARB processes
- (2011) Roohollah Jamaati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Elemental redistribution in a nanocrystalline Ni–Fe alloy induced by high-pressure torsion
- (2011) S. Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of bainite in producing nano/ultrafine grained steel by the martensite treatment
- (2011) Hossein Zakerinia et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and texture evolution during accumulative roll bonding of aluminium alloy AA5086
- (2011) Shibayan Roy et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano grained AZ31 alloy achieved by equal channel angular rolling process
- (2011) F.Z. Hassani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of a novel severe plastic deformation method for tubular materials: Tube Channel Pressing (TCP)
- (2011) A. Zangiabadi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Three-dimensional finite element analysis of torsion extrusion (TE) as an SPD process
- (2011) Mohammad Jahedi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Al/SiO2 composite produced by CAR process
- (2011) Majid Hashemi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation of UFG-surface layers on a HSLA steel by a continuous Surface-SPD-Process
- (2011) Vanessa Kaune et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Ultrafine grains and the Hall–Petch relationship in an Al–Mg–Si alloy processed by high-pressure torsion
- (2011) Aicha Loucif et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Cold roll bonding bond strengths: review
- (2011) R Jamaati et al. MATERIALS SCIENCE AND TECHNOLOGY
- Development of texture during ARB in metal matrix composite
- (2011) R Jamaati et al. MATERIALS SCIENCE AND TECHNOLOGY
- Deformation twinning in nanocrystalline materials
- (2011) Y.T. Zhu et al. PROGRESS IN MATERIALS SCIENCE
- Formability of ultrafine-grained interstitial-free steel fabricated by accumulative roll-bonding and subsequent annealing
- (2011) Rika Yoda et al. SCRIPTA MATERIALIA
- Differences between top-down and bottom-up approaches in mineralizing thick, partially demineralized collagen scaffolds
- (2010) Yan Liu et al. Acta Biomaterialia
- Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium
- (2010) D.K. Yang et al. ACTA MATERIALIA
- Deformation homogeneity in accumulative back extrusion processing of AZ31 magnesium alloy
- (2010) S.M. Fatemi-Varzaneh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Structure and mechanical behaviour of interstitial-free steel processed by equal-channel angular pressing
- (2010) Kristián Máthis et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The Role of Surface Preparation Parameters on Cold Roll Bonding of Aluminum Strips
- (2010) Roohollah Jamaati et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Producing the nano/ultrafine grained low carbon steel by martensite process using plane strain compression
- (2010) S.M. Hosseini et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Strengthening mechanisms and optimization of structure and properties in a nanostructured IF steel
- (2010) X. Huang et al. JOURNAL OF MATERIALS SCIENCE
- Effect of friction, annealing conditions and hardness on the bond strength of Al/Al strips produced by cold roll bonding process
- (2010) Roohollah Jamaati et al. MATERIALS & DESIGN
- High-strength and highly-uniform composite produced by anodizing and accumulative roll bonding processes
- (2010) Roohollah Jamaati et al. MATERIALS & DESIGN
- A combined top-down and bottom-up approach to fabricate silica films with bimodal porosity
- (2010) Kazuya Ijichi et al. MATERIALS LETTERS
- Textural evolution of nano-grained 70/30 brass produced by accumulative roll-bonding
- (2010) Somayeh Pasebani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Constrained groove pressing of low carbon steel: Nano-structure and mechanical properties
- (2010) F. Khodabakhshi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High tensile ductility and high strength in ultrafine-grained low-carbon steel
- (2010) T.S. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Accumulative spin-bonding (ASB) as a novel SPD process for fabrication of nanostructured tubes
- (2010) M.S. Mohebbi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Al2O3 nano-particles on the bond strength in CRB process
- (2010) Roohollah Jamaati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of grain refinement to 1μm on strength and toughness of dual-phase steels
- (2010) Marion Calcagnotto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Application of ARB process for manufacturing high-strength, finely dispersed and highly uniform Cu/Al2O3 composite
- (2010) Roohollah Jamaati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of the Mg/Al laminated composite fabricated by accumulative roll bonding (ARB)
- (2010) K. Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of ARB process on textural evolution of AA1100 aluminum alloy
- (2010) Mohammad Raei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
- (2010) Marion Calcagnotto et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding
- (2010) Roohollah Jamaati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of particle size on microstructure and mechanical properties of composites produced by ARB process
- (2010) Roohollah Jamaati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano-grain evolution in austenitic stainless steel during multi-directional forging
- (2010) Y. Nakao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain growth and dislocation density evolution in a nanocrystalline Ni–Fe alloy induced by high-pressure torsion
- (2010) S. Ni et al. SCRIPTA MATERIALIA
- Microstructure and texture evolution during annealing a cryogenic-SPD processed Al-alloy with a nanoscale lamellar HAGB grain structure
- (2009) G.H. Zahid et al. ACTA MATERIALIA
- Dislocation density evolution during high pressure torsion of a nanocrystalline Ni–Fe alloy
- (2009) Y. B. Wang et al. APPLIED PHYSICS LETTERS
- Mechanism of grain growth during severe plastic deformation of a nanocrystalline Ni–Fe alloy
- (2009) Y. B. Wang et al. APPLIED PHYSICS LETTERS
- Mechanical performance and texture characteristic of an IF steel containing Nb and Ti by double cold rolling
- (2009) L WANG International Journal of Minerals Metallurgy and Materials
- The grain refinement of Al-6061 via ECAE processing: Deformation behavior, microstructure and property
- (2009) M.W. Fu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stored energy of a severely deformed interstitial free steel
- (2009) Sujoy S. Hazra et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of the parameters of the cold roll bonding (CRB) process
- (2009) Roohollah Jamaati et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano-grained 70/30 brass strip produced by accumulative roll-bonding (ARB) process
- (2009) Somayeh Pasebani et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of Texture, Microstructure, and Grain Boundary Character Distribution in a High-Strength Boron-Added Interstitial-Free Steel after Severe Cold Rolling and Annealing
- (2009) Rajib Saha et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Evolution of Grain-Boundary Microstructure and Texture in Interstitial-Free Steel Processed by Equal-Channel Angular Extrusion
- (2009) Ayan Bhowmik et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Texture evolution in equal-channel angular extrusion
- (2009) Irene J. Beyerlein et al. PROGRESS IN MATERIALS SCIENCE
- Nanomechanics of Hall–Petch relationship in nanocrystalline materials
- (2009) C.S. Pande et al. PROGRESS IN MATERIALS SCIENCE
- Texture evolution of the Mg/Al laminated composite fabricated by the accumulative roll bonding
- (2009) H. Chang et al. SCRIPTA MATERIALIA
- Structural refinement and deformation mechanisms in nanostructured metals
- (2009) K. Lu et al. SCRIPTA MATERIALIA
- Comparison of the top-down and bottom-up approach to fabricate nanowire-based silicon/germanium heterostructures
- (2009) A. Wolfsteller et al. THIN SOLID FILMS
- The effect of cryogenic temperature and change in deformation mode on the limiting grain size in a severely deformed dilute aluminium alloy
- (2008) Y. Huang et al. ACTA MATERIALIA
- Integrated bottom up and top down approach to optimization of the extrusion process
- (2008) T.H.J. Vaneker et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Severe plastic deformation (SPD) processes for metals
- (2008) A. Azushima et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Managing Both Strength and Ductility in Ultrafine Grained Steels
- (2008) Nobuhiro Tsuji et al. ISIJ INTERNATIONAL
- Electron back scattered diffraction (EBSD) characterization of warm rolled and accumulative roll bonding (ARB) processed ferrite
- (2008) A. Kolahi et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Hot rolling tests with steel bars and silicon nitride rolls
- (2008) Peter Andersson et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural evolution and mechanical properties of accumulative roll bonded interstitial free steel
- (2008) S. Tamimi et al. MATERIALS & DESIGN
- Tensile behaviors of IF steel with different cold-rolling reductions
- (2008) Y.F. Shen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The role of the friction during the equal channel angular pressing of an IF-steel billet
- (2008) N. Medeiros et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An EBSD investigation of interstitial-free steel subjected to equal channel angular extrusion
- (2008) Azdiar A. Gazder et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nanostructure and related mechanical properties of an Al–Mg–Si alloy processed by severe plastic deformation
- (2008) Gulnaz Nurislamova et al. PHILOSOPHICAL MAGAZINE LETTERS
- Using high-pressure torsion for metal processing: Fundamentals and applications
- (2008) A ZHILYAEV et al. PROGRESS IN MATERIALS SCIENCE
- Progress in cold roll bonding of metals
- (2008) Long Li et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Comparative study of precipitation behavior and texture formation in continuously annealed Ti and Ti+Nb added interstitial-free high-strength steels
- (2008) P. Ghosh et al. SCRIPTA MATERIALIA
- Influence of processing parameters on the bond toughness of roll-bonded aluminium strip
- (2008) M.Z. Quadir et al. SCRIPTA MATERIALIA
- Microstructural evolution and nanostructure formation in copper during dynamic plastic deformation at cryogenic temperatures
- (2007) Y.S. Li et al. ACTA MATERIALIA
- The role of molybdenum additions and prior deformation on acicular ferrite formation in microalloyed Nb–Ti low-carbon line-pipe steels
- (2007) Zhenghua Tang et al. MATERIALS CHARACTERIZATION
- Effects of severe cold rolling on the texture and grain boundary character of a Ti–Nb IF steel
- (2007) Rajib Saha et al. MATERIALS LETTERS
- A crystal plasticity finite element analysis of cross-grain deformation heterogeneity in equal channel angular extrusion and its implications for texture evolution
- (2007) Saiyi Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Nano-grained copper strip produced by accumulative roll bonding process
- (2007) Mahnoosh Shaarbaf et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now