Experimental Method to Simulate Coal Fines Migration and Coal Fines Aggregation Prevention in the Hydraulic Fracture

A simple and effective experimental method is proposed to simulate coal fines migration through the proppant pack; such migration inevitably occurs during the process of fracturing fluid flowback or dewatering and gas production in coalbed methane (CBM) reservoirs. The damage to conductivity caused by coal fines migration in the pack and the factors affecting such migration are analyzed. A dispersion agent of coal fines applicable to hydraulic fracturing in CBM is optimized, consequently solving the problem of coal fines aggregation and retention in the proppant pack. Discharging coal fines with water or water-based fracturing fluid from the proppant pack can be difficult because of the adsorption and hydrophobicity of coal fines. Thus, coal fines are likely to aggregate and be retained in the proppant pack, thereby resulting in pore throat plugging, which causes serious damage to fracture conductivity. Two percent coal fines can reduce propped fracture conductivity by 24.4 %. The mobility and retention of coal fines in the proppant pack are affected by proppant size, proppant type, flowback rate, and coal fines property. When flowback rate exceeds the critical value, coal fines can be discharged from the pack, consequently reducing damage to propped fracture conductivity. More importantly, the steady discharging of coal fines requires steady dewatering and gas production to avoid flow shock, which causes pressure disturbance to drive coal fines in a remote formation. The optimized dispersant FSJ-02 employed in this paper can effectively change the wettability and surface potential of coal fines to improve their suspension and dispersion in water-based fracturing fluid. The recovery rate of coal fines increased by 31.5 %, whereas conductivity increased by 13.3 %.