4.7 Article

Life expectancy prediction and application properties of novel polyurethane based thickness sensitive and thickness insensitive spectrally selective paint coatings for solar absorbers

Journal

SOLAR ENERGY MATERIALS AND SOLAR CELLS
Volume 95, Issue 11, Pages 2965-2975

Publisher

ELSEVIER
DOI: 10.1016/j.solmat.2011.05.014

Keywords

Accelerated test procedure; Lifetime assessment; Spectral selectivity; Organic coatings; Solar absorbers

Funding

  1. Slovenian Research Agency [3211-09-000029]
  2. R&D project Hybrid Nanocomposites for Multifunctional and Intelligent Paint Coatings (HNA)
  3. [P1-0030]

Ask authors/readers for more resources

A novel Thickness Sensitive Spectrally Selective (TSSS PU B: a(s)=0.90, e(r)=0.20) paint coating on aluminium substrate was prepared from commercially available polyurethane binder (Binder B) (HELIOS TBLUS, SI) and black pigment (spinet (Mn-Fe)), in combination with trisilanol polyhedral oligomeric silsesquioxane (POSS), which served as pigment dispersant. Polyurethane resin binder B was selected because of its higher thermal stability (determined from thermogravimetric measurements (TG)) than polyurethane resin binder A, which has previously been used for making Thickness Insensitive Spectrally Selective (TISS PU A) coatings (a(s)=0.90, e(r)=0.38) deposited on copper absorbers (Kunic, 2009 [36]). Thermal degradation of the TSSS PU B and TISS PU A coatings, both deposited on aluminium substrates, was studied by following, as close as possible, the methodology worked out within TASK 10 of the IEA's Solar and Heating Programme. Thermal load tests were performed in the temperature range from 170 to 200 degrees C at various time intervals (1, 6, 10, 15, 21 days). Degradation of the coatings was assessed using a variety of degradation indicators: changes of solar absorptance and thermal emittance determined from the hemispherical IR and VIS/NIR spectra, intensity changes of selected vibrational modes attributed to the polymeric backbone and ester and urethane linkages and combined with peel-off tests used as adhesion and cohesion indicators. The results revealed that degradation of the polyurethane resin binder was attributable to the breaking of the urethane linkages, also shown from the AFM and XPS spectra measurements. For the TISS PU A coating, the life expectancy was estimated to be 22.77 years (activation energy (E-a)=163.2 kj/mol, T-eff= 113.4 degrees C) while for the TSSS PU B coatings, it was at least 25.96 years (activation energy (E-a)=96 kj/mol, T-eff= 102 degrees C). (C) 2011 Elsevier B.V. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available