Review of laser welding monitoring

Multiple-optics sensing of high-brightness disk laser welding process

(2013) Deyong You et al.   NDT & E INTERNATIONAL

Coaxial monitoring of the fibre laser lap welding of Zn-coated steel sheets using an auxiliary illuminant

(2013) Yi Zhang et al.   OPTICS AND LASER TECHNOLOGY

Effects of grain size and precipitation on liquation cracking of AZ61 magnesium alloy laser welding joints

(2013) X L Chen et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Study on microtexture of laser welded 5A90 aluminium–lithium alloys using electron backscattered diffraction

(2013) L Cui et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Butt welding of thick, high strength steel plate with a high power laser and hot wire to improve tolerance to gap variance and control weld metal oxygen content

(2013) T Ohnishi et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Seam Tracking Monitoring Based on Adaptive Kalman Filter Embedded Elman Neural Network During High-Power Fiber Laser Welding

(2012) Xiangdong Gao et al.   IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS

Non-destructive Real Time Monitoring of the Laser Welding Process

(2012) Hana Sebestova et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Real-time monitoring of laser welding of galvanized high strength steel in lap joint configuration

(2012) Fanrong Kong et al.   OPTICS AND LASER TECHNOLOGY

Coaxial monitoring of keyhole during Yb:YAG laser welding

(2012) Cheol-Hee Kim et al.   OPTICS AND LASER TECHNOLOGY

Study of Dynamic Features of Surface Plasma in High-Power Disk Laser Welding

(2012) Teng Wang et al.   PLASMA SCIENCE & TECHNOLOGY

PA position full penetration high power laser beam welding of up to 30 mm thick AlMg3 plates using electromagnetic weld pool support

(2012) V V Avilov et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Plasma Charge Current for Controlling and Monitoring Electron Beam Welding with Beam Oscillation

(2012) Dmitriy Trushnikov et al.   SENSORS

Robust Estimation of Road Frictional Coefficient

(2011) Changsun Ahn et al.   IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY

Weld-pool image centroid algorithm for seam-tracking vision model in arc-welding process

(2011) X. Gao et al.   IET Image Processing

Infrared image recognition for seam tracking monitoring during fiber laser welding

(2011) Xiangdong Gao et al.   MECHATRONICS

Spectroscopic, energetic and metallographic investigations of the laser lap welding of AISI 304 using the response surface methodology

(2011) Domenico Rizzi et al.   OPTICS AND LASERS IN ENGINEERING

High speed imaging technique Part 2 – High speed imaging of power beam welding phenomena

(2011) S Tsukamoto   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Effects of laser induced metal vapour on arc plasma during laser arc double sided welding of 5A06 aluminium alloy

(2011) Y B Chen et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

A Vision-Based Self-Tuning Fuzzy Controller for Fillet Weld Seam Tracking

(2010) Zaojun Fang et al.   IEEE-ASME TRANSACTIONS ON MECHATRONICS

In-process Monitoring and Adaptive Control during Micro Welding with CW Fiber Laser

(2010) Yousuke Kawahito   Journal of Laser Micro Nanoengineering

Inherent instability investigation for low speed laser welding of aluminum using a single-mode fiber laser

(2010) A.G. Paleocrassas et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Signal overlap in the monitoring of laser welding

(2010) I Eriksson et al.   MEASUREMENT SCIENCE and TECHNOLOGY

Challenges to the interpretation of the electromagnetic feedback from laser welding

(2010) R. Olsson et al.   OPTICS AND LASERS IN ENGINEERING

Exploring Infrared Sensoring for Real Time Welding Defects Monitoring in GTAW

(2010) Sadek C. A. Alfaro et al.   SENSORS

Nonlinear Identification of Laser Welding Process

(2009) Xiaodong Na et al.   IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY

Laser welding defects detection in automotive industry based on radiation and spectroscopical measurements

(2009) Sergio Saludes Rodil et al.   INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY

A neural network and multiple regression method for the characterization of the depth of weld penetration in laser welding based on acoustic signatures

(2009) Wei Huang et al.   JOURNAL OF INTELLIGENT MANUFACTURING

In-process monitoring and feedback control for stable production of full-penetration weld in continuous wave fibre laser welding

(2009) Yousuke Kawahito et al.   JOURNAL OF PHYSICS D-APPLIED PHYSICS

Feasibility study of using acoustic signals for online monitoring of the depth of weld in the laser welding of high-strength steels

(2009) W Huang et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

High quality welding of stainless steel with 10 kW high power fibre laser

(2009) Y. Kawahito et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Analysis of YAG laser lap-welding of zinc coated steel sheets

(2008) M. Schmidt et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Design, implementation and testing of a fuzzy control scheme for laser welding

(2008) J. M. Jauregui et al.   JOURNAL OF LASER APPLICATIONS

FPGA implementation of time–frequency analysis algorithms for laser welding monitoring

(2008) A. Molino et al.   MICROPROCESSORS AND MICROSYSTEMS

Effect of weakly ionised plasma on penetration of stainless steel weld produced with ultra high power density fibre laser

(2008) Y. Kawahito et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Characterisation of plasma induced during high power fibre laser welding of stainless steel

(2008) Y. Kawahito et al.   SCIENCE AND TECHNOLOGY OF WELDING AND JOINING

Application of circular laser vision sensor (CLVS) on welded seam tracking

(2007) Peiquan Xu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY