Characterization of Low-Symmetry Structures from Phase Equilibrium of Fe-Al System—Microstructures and Mechanical Properties

Phase equilibria and thermodynamics of the Fe–Al–C system: Critical evaluation, experiment and thermodynamic optimization

(2014) Anh Thu Phan et al.   ACTA MATERIALIA

Phase constitution in the interfacial region of laser penetration brazed magnesium–steel joints

(2014) Yugang Miao et al.   MATERIALS CHARACTERIZATION

Intermetallics Synthesis in the Fe–Al System via Layer by Layer 3D Laser Cladding

(2013) Igor Shishkovsky et al.   Crystals

Determination of fracture toughness using the area of micro-crack tracks left in brittle materials by Vickers indentation test

(2013) Alireza Moradkhani et al.   Journal of Advanced Ceramics

Nanostructured ceramic composite coating prepared by reactive plasma spraying micro-sized Al–Fe2O3 composite powders

(2012) Lei Wang et al.   CERAMICS INTERNATIONAL

Interfacial reactions of solid Co and solid Fe with liquid Al

(2012) N. Tang et al.   CORROSION SCIENCE

Formation enthalpy of intermetallic phases from Al–Fe system measured with solution calorimetric method

(2012) W. Gąsior et al.   INTERMETALLICS

On the formation of intermetallics in Fe–Al system – An in situ XRD study

(2012) Pavel Novák et al.   INTERMETALLICS

The kinetics of non-isothermal iron and aluminum powder mixtures sintering in protective atmosphere

(2012) P. Matysik et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Microstructure and mechanical properties of in-situ Al13Fe4/Al composites prepared by mechanical alloying and spark plasma sintering

(2012) Jian Gu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tribological properties of Ni3Al produced by pressure-assisted volume combustion synthesis

(2012) O. Ozdemir et al.   TRIBOLOGY INTERNATIONAL

Alloying element additions to Ni3Al: Site preferences and effects on elastic properties from first-principles calculations

(2011) Qiong Wu et al.   COMPUTATIONAL MATERIALS SCIENCE

Effect of transition-metal substitution on electronic and mechanical properties of Fe3Al: First-principles calculations

(2011) Xue-lian Niu et al.   COMPUTATIONAL MATERIALS SCIENCE

Electronic and dynamical properties of NiAl studied from first principles

(2011) Hongzhi Fu et al.   INTERMETALLICS

Variables affecting growth and morphology of the intermetallic layer (Fe2Al5)

(2011) M. Yousaf et al.   MATERIALS CHARACTERIZATION

Functionally graded WC–Co/NiAl HVOF coatings for damage tolerance, wear and corrosion protection

(2011) Giovanni Bolelli et al.   SURFACE & COATINGS TECHNOLOGY

The influence of different additives on the kinetics of self-propagating high-temperature synthesis during the sintering process of Fe and Al elemental powders

(2010) Krzysztof Karczewski et al.   INTERMETALLICS

Microstructure characterization of D-gun sprayed Fe–Al intermetallic coatings

(2010) C. Senderowski et al.   INTERMETALLICS

Intermediary phases formation in Fe–Al–Si alloys during reactive sintering

(2010) Pavel Novák et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Sintering and mechanical properties of mechanically alloyed Fe–Al–(B) nanostructures

(2010) S. Izadi et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Fe–Al phase formation around SHS reactions under isothermal conditions

(2010) Ewelina Pocheć et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Laser roll welding of dissimilar metal joint of zinc coated steel to aluminum alloy

(2010) Hitoshi Ozaki et al.   JOURNAL OF LASER APPLICATIONS

Processing and characterization of graded metal/intermetallic materials: The example of Fe/FeAl intermetallics

(2010) Tomasz Durejko et al.   MATERIALS & DESIGN

Anisotropic physical properties of theAl13Fe4complex intermetallic and its ternary derivativeAl13(Fe,Ni)4

(2010) P. Popčević et al.   PHYSICAL REVIEW B

An assessment of the entire Al–Fe system including D03 ordering

(2009) Bo Sundman et al.   ACTA MATERIALIA

Development of a new graded-porosity FeAl alloy by elemental reactive synthesis

(2009) P.Z. Shen et al.   DESALINATION

Determination of the crystal structure of the ɛ phase in the Fe–Al system by high-temperature neutron diffraction

(2009) F. Stein et al.   INTERMETALLICS

Influence of aluminum oxides on abrasive wear resistance of Fe–50at.% Al intermetallic sinters

(2009) S. Jóźwiak et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of fabrication methods on microstructure and mechanical properties of Fe3Al-based alloys

(2009) Jian Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Bulk amorphous and nanocrystalline Al83Fe17 alloys prepared by consolidation of mechanically alloyed amorphous powder

(2009) M. Krasnowski et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The effects of ceria on the mechanical properties and thermal shock resistance of thermal sprayed NiAl intermetallic coatings

(2008) Y. Wang et al.   INTERMETALLICS

Nanophase intermetallic FeAl obtained by sintering after mechanical alloying

(2008) L. D’Angelo et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Interfacial microstructure and strength of steel/aluminum alloy joints welded by resistance spot welding with cover plate

(2008) Ranfeng Qiu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Phase evolution of an aluminized steel by oxidation treatment

(2007) Wang Deqing   APPLIED SURFACE SCIENCE