4.4 Article

Use of red gypsum in soil mixing engineering applications

Publisher

ICE PUBL
DOI: 10.1680/geng.10.00061

Keywords

geotechnical engineering; strength & testing of materials

Funding

  1. Engineering and Physical Sciences Research Council (ESPRC)
  2. Huntsman Tioxide Ltd
  3. EPSRC [GR/R62113/01]
  4. Engineering and Physical Sciences Research Council [EP/G013403/1] Funding Source: researchfish
  5. EPSRC [EP/G013403/1] Funding Source: UKRI

Ask authors/readers for more resources

This paper describes a laboratory trial to test the effectiveness of a waste-based binder as a cement replacement for deep in situ soil stabilisation. The binder is composed of red gypsum, a co-product of the production of white pigment titanium dioxide, and ground granulated blast furnace slag (GGBS), with a small addition of lime to increase soil pH and enable pozzolanic reactions to occur. The waste binder was mixed with a number of typical UK soils and cured for 7, 14, 28, 56 and 112 days in wet and dry conditions. Samples were then tested for undrained shear strength and stiffness, and results compared with values exhibited by soils mixed with Portland cement. Selected samples were also subjected to X-ray diffraction analysis. Results showed that, while not achieving strengths as high or hardening as rapid as samples mixed with Portland cement, samples mixed with the gypsum-GGBS binder achieved high strengths and stiffness, and demonstrated that gypsum-GGBS binders have the potential to be used as cement replacements in ground improvement.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.4
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available