Preparation of polylactic acid/epoxidized palm oil/fatty nitrogen compounds modified clay nanocomposites by melt blending

In this study, new biopolymer nanocomposites have been prepared. Fatty nitrogen compounds (FNCs); fatty amide (FA), fatty hydroxamic acid (FHA), and carbonyl difatty amide (CDFA), which were synthesized from palm oil, have been used as one of organic compounds to modify natural clay (sodium montmorillonite). The clay modification was carried out by stirring the clay particles in an aqueous solution of FA, FHA, and CDFA by which the clay layer distance increases from 1.23 to 2.71, 2.91 and 3.23 nm, respectively. The modified clay was then used in the preparation of the polylactic acid/epoxidized palm oil (PLA/EPO) blend nanocomposites. The interaction of the modifier in the clay layer was characterized by X-ray diffraction (XRD), and Fourier transform infrared (FTIR). Elemental analysis was used to estimate the presence of FNCs in the clay. The nanocomposites were synthesized by melt blending of the modified clay and PLA/EPO blend at the weight ratio of 80/20. The nanocomposites were then characterized using XRD, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and tensile properties measurements. The XRD and TEM results confirmed the production of nanocomposites. PLA/EPO modified clay nanocomposites show higher thermal stability and significant improvement of mechanical properties in comparison with those of the PLA/EPO blend.