Effects of carbon impurities on the power radiation and tungsten target erosion in EAST

The effects of particle recycling on the divertor plasma: A particle-in-cell with Monte Carlo collision simulation

(2018) Mingyu Chang et al.   PHYSICS OF PLASMAS

The inter-ELM tungsten erosion profile in DIII-D H-mode discharges and benchmarking with ERO+OEDGE modeling

(2017) T. Abrams et al.   NUCLEAR FUSION

SOLPS analysis of neutral baffling for the design of a new diverter in DIII-D

(2017) Chaofeng Sang et al.   NUCLEAR FUSION

Simulation of tungsten erosion and transport near the divertor plate during ELMs by a kinetic method

(2016) Zhenyue Sun et al.   FUSION ENGINEERING AND DESIGN

ELM-resolved divertor erosion in the JET ITER-Like Wall

(2016) N. Den Harder et al.   NUCLEAR FUSION

Comparison of H-mode plasmas in JET-ILW and JET-C with and without nitrogen seeding

(2016) A.E. Jaervinen et al.   NUCLEAR FUSION

SOLPS modeling of lithium transport in the scrape-off layer during real-time lithium injection on EAST

(2016) Chaofeng Sang et al.   NUCLEAR FUSION

Experimental estimation of tungsten impurity sputtering due to Type I ELMs in JET-ITER-like wall using pedestal electron cyclotron emission and target Langmuir probe measurements

(2016) C Guillemaut et al.   PHYSICA SCRIPTA

SOLPS5.1 analysis of detachment with drifts and gas pumping effects in EAST

(2016) Hailong Du et al.   PLASMA PHYSICS AND CONTROLLED FUSION

SOLPS modeling of the effect on plasma detachment of closing the lower divertor in DIII-D

(2016) C F Sang et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Overview of the EAST in-vessel components upgrade

(2015) Damao Yao et al.   FUSION ENGINEERING AND DESIGN

Quantitative modeling of fuel retention in the JET-C and JET-ILW wall configurations by WallDYN and predictions for ITER

(2015) K. Schmid et al.   JOURNAL OF NUCLEAR MATERIALS

Experimental studies and modeling of complete H-mode divertor detachment in ASDEX Upgrade

(2015) F. Reimold et al.   JOURNAL OF NUCLEAR MATERIALS

SOLPS modelling of W arising from repetitive mitigated ELMs in ITER

(2015) D.P. Coster et al.   JOURNAL OF NUCLEAR MATERIALS

Modeling of detachment experiments at DIII-D

(2015) J.M. Canik et al.   JOURNAL OF NUCLEAR MATERIALS

Material migration studies with an ITER first wall panel proxy on EAST

(2015) R. Ding et al.   NUCLEAR FUSION

Simulation of gross and net erosion of high-Zmaterials in the DIII-D divertor

(2015) R. Ding et al.   NUCLEAR FUSION

WALLDYN simulations of global impurity migration in JET and extrapolations to ITER

(2015) K. Schmid et al.   NUCLEAR FUSION

Advances in H-mode physics for long-pulse operation on EAST

(2015) Baonian Wan et al.   NUCLEAR FUSION

Divertor studies in nitrogen induced completely detached H-modes in full tungsten ASDEX Upgrade

(2015) F. Reimold et al.   NUCLEAR FUSION

Design, R&D and commissioning of EAST tungsten divertor

(2015) D M Yao et al.   PHYSICA SCRIPTA

SOLPS analysis of the MAST-U divertor with the effect of heating power and pumping on the access to detachment in the Super-x configuration

(2015) E Havlíčková et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Influence of theE  ×  Bdrift in high recycling divertors on target asymmetries

(2015) A V Chankin et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Overview of EU DEMO design and R&D activities

(2014) G. Federici et al.   FUSION ENGINEERING AND DESIGN

Numerical simulation of the energy deposition evolution on divertor target during type-III ELMy H-mode in EAST using SOLPS

(2014) Hailong Du et al.   FUSION ENGINEERING AND DESIGN

Physics Design of CFETR: Determination of the Device Engineering Parameters

(2014) Baonian Wan et al.   IEEE TRANSACTIONS ON PLASMA SCIENCE

Progress in the physics basis of a Fusion Nuclear Science Facility based on the Advanced Tokamak concept

(2014) A.M. Garofalo et al.   NUCLEAR FUSION

Plasma facing components for the Experimental Advanced Superconducting Tokamak and CFETR

(2014) Jiangang Li et al.   PHYSICA SCRIPTA

Measurement and analysis ofZeffin EAST tokamak

(2014) Yingjie Chen et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Monte Carlo simulations of tungsten redeposition at the divertor target

(2014) A V Chankin et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Plasma operation with an all metal first-wall: Comparison of an ITER-like wall with a carbon wall in JET

(2013) G.F. Matthews   JOURNAL OF NUCLEAR MATERIALS

A full tungsten divertor for ITER: Physics issues and design status

(2013) R.A. Pitts et al.   JOURNAL OF NUCLEAR MATERIALS

Tungsten divertor erosion in all metal devices: Lessons from the ITER like wall of JET

(2013) G.J. van Rooij et al.   JOURNAL OF NUCLEAR MATERIALS

A long-pulse high-confinement plasma regime in the Experimental Advanced Superconducting Tokamak

(2013) J. Li et al.   Nature Physics

A simulation study of large power handling in the divertor for a Demo reactor

(2013) Nobuyuki Asakura et al.   NUCLEAR FUSION

Fuel retention studies with the ITER-Like Wall in JET

(2013) S. Brezinsek et al.   NUCLEAR FUSION

Impact of carbon and tungsten as divertor materials on the scrape-off layer conditions in JET

(2013) M. Groth et al.   NUCLEAR FUSION

Modelling of radiative divertor operation towards detachment in experimental advanced superconducting tokamak

(2013) YiPing Chen et al.   PHYSICS OF PLASMAS

Modelling of hydrogen isotope inventory in mixed materials including porous deposited layers in fusion devices

(2012) Chaofeng Sang et al.   NUCLEAR FUSION

Tungsten as material for plasma-facing components in fusion devices

(2011) V. Philipps   JOURNAL OF NUCLEAR MATERIALS

Physics basis and design of the ITER plasma-facing components

(2011) R.A. Pitts et al.   JOURNAL OF NUCLEAR MATERIALS

Obtaining reactor-relevant divertor conditions in tokamaks

(2011) P.C. Stangeby et al.   NUCLEAR FUSION

DIVIMP simulation of W transport in the SOL of JET H-mode plasmas

(2011) A Järvinen et al.   PHYSICA SCRIPTA

Preparing the scientific basis for an all metal ITER

(2011) R Neu et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Full-tungsten plasma edge simulations with SOLPS

(2010) X. Bonnin et al.   JOURNAL OF NUCLEAR MATERIALS

Influence of cross-field drifts and chemical sputtering on simulations of divertor particle and heat loads in ohmic and L-mode plasmas in DIII-D, AUG, and JET using UEDGE

(2010) M. Groth et al.   JOURNAL OF NUCLEAR MATERIALS

Effect of E×B driven transport on the deposition of carbon in the outer divertor of ASDEX Upgrade

(2010) L. Aho-Mantila et al.   JOURNAL OF NUCLEAR MATERIALS

The relation between upstream density and temperature widths in the scrape-off layer and the power width in an attached divertor

(2010) P.C. Stangeby et al.   NUCLEAR FUSION

UEDGE simulation of edge plasmas in DIII-D double null configurations

(2010) G. D. Porter et al.   PHYSICS OF PLASMAS

Fuel retention in tokamaks

(2009) T. Loarer   JOURNAL OF NUCLEAR MATERIALS

Plasma-wall interaction and plasma behaviour in the non-boronised all tungsten ASDEX Upgrade

(2009) R. Dux et al.   JOURNAL OF NUCLEAR MATERIALS

Analysis of performance of the optimized divertor in ITER

(2009) A.S. Kukushkin et al.   NUCLEAR FUSION

Two-point analysis of the numerical modelling of detached divertor plasmas

(2009) V Kotov et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Simulating the Role of Intrinsic Carbon Impurities in the Divertor Detachment of ASDEX Upgrade

(2008) M. Wischmeier et al.   CONTRIBUTIONS TO PLASMA PHYSICS

Simulation of ASDEX Upgrade Ohmic plasmas for SOLPS code validation

(2008) A.V. Chankin et al.   NUCLEAR FUSION

Tritium inventory in ITER plasma-facing materials and tritium removal procedures

(2008) Joachim Roth et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Numerical modelling of high density JET divertor plasma with the SOLPS4.2 (B2-EIRENE) code

(2008) V Kotov et al.   PLASMA PHYSICS AND CONTROLLED FUSION

Sputtering yields

(2008) W. Eckstein   VACUUM