Article
Engineering, Electrical & Electronic
Siddharth Swaminathan, Arezoo Emadi
Summary: Quartz crystal microbalance (QCM) operates by detecting changes in resonant frequency due to mass addition in its mass loading area. A novel distributed electrode configuration is proposed to effectively utilize the energy trapping effect and enhance the device's mass sensitivity while using a smaller mass loading area. The analysis revealed that the proposed electrode topology achieves a significantly higher mass sensitivity and comparable distribution compared to conventional electrode configurations.
IEEE SENSORS JOURNAL
(2023)
Article
Nanoscience & Nanotechnology
Muthamil T. Selvan, Simran Sharma, Susmita Naskar, Soumyadeep Mondal, Manish Kaushal, Titash Mondal
Summary: In this study, a stencil printable multifunctional adhesive sensor was developed in a solvent-free condition. It has good conformity and proper adhesion to skin, and can function as a temperature and strain sensor, as well as monitor various physiological parameters.
ACS APPLIED MATERIALS & INTERFACES
(2022)
Article
Chemistry, Multidisciplinary
Chunxiao Jiao, Chengkai Wang, Meng Wang, Jinghong Pan, Chao Gao, Qi Wang
Summary: With the rapid development of flexible electronic devices in recent years, researchers have become greatly interested in the research of electronic skin (e-skin). This paper introduces a wireless passive e-skin designed based on the surface acoustic wave sensor (SAWS) of lithium niobate piezoelectric film. The e-skin has advantages such as small size, high precision, low power consumption, and good flexibility, making it a sensor platform for a wide range of external stimuli.
Article
Engineering, Multidisciplinary
Xiaofeng Han, Gege Li, Penggang Wang, Zhaoyi Chen, Dongbo Cui, Hai Zhang, Li Tian, Xiangming Zhou, Zuquan Jin, Tiejun Zhao
Summary: This study develops a convenient and efficient rebar detection method based on capacitance to precisely locate the state of the rebars in concrete. The research optimizes the electrode of the capacitive sensor and verifies its feasibility and reliability. The relationships among capacitance, rebar diameter, and cover thickness are explored, and 3D diagrams are established to visualize the correlations.
Article
Construction & Building Technology
Zhen Liu, Xingyu Gu, Chunying Wu, Hua Ren, Zhou Zhou, Shi Tang
Summary: This paper proposes a method of combining indoor experiments with finite element simulations to analyze the validity of strain sensors in asphalt pavement. The results show that FE simulation is feasible for simulating strain in asphalt mixtures with sensors, and FBG sensors are more suitable for measuring horizontal strain. The effectiveness of FE simulation is also demonstrated in long-term dynamic loading tests.
CONSTRUCTION AND BUILDING MATERIALS
(2022)
Article
Chemistry, Analytical
Huamin Zhu, Fuzhong Zheng, Huiwen Leng, Cheng Zhang, Kun Luo, Yibo Cao, Xing Yang
Summary: Microcontact force measurement is widely used in various fields such as micro/nano manufacturing, medicine and microelectromechanical systems. Traditional instruments for microcontact force measurement are complex and costly, but the development of microsensor technology has provided a new, simple and low-cost approach. By utilizing micropressure sensors, a method for microcontact force measurement was proposed and validated through simulation and experiment, resulting in an equation describing the relationship among force, output voltage and contact position. This method could be applied in a cost-effective manner in various applications, showing relevance to research and practical use in the field.
Article
Chemistry, Physical
Ning Lv, Chao Zhong, Jiacheng Wang, Likun Wang
Summary: The study through simulation and experiment shows that the 2-2 piezoelectric composite trilaminar vibrator has superior bending vibration characteristics under fixed boundary condition, making it a better choice for manufacturing low-frequency transducers.
Article
Engineering, Mechanical
Amirali Amirian, Seyed Ebrahim Moussavi Torshizi, Seyed Hossein Dibajian
Summary: This study aims to identify microstructural changes of metal by measuring natural frequency and damping loss factor. Spheroidization was found to increase natural frequencies and damping loss factors by dispersing carbides in the ferritic matrix. Finite element analysis confirmed experimental results, showing that changing microstructures led to considerable changes in stress statistical dispersion.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
(2022)
Article
Chemistry, Multidisciplinary
Yunlin Liu, Hongbao Xu, Xinxin Ma, Donghua Wang, Xiao Huang
Summary: This paper proposes a calculation method using a cross-sectional vibration mode in combination with the impact-echo method to detect the health of concrete columns. It studies the variation of the predominant frequency in the mid-column region and the critical boundary and analyzes the influence of the edge on the detection results. The differences in eigenvalues under different cross-section vibration modes are revealed, and a quantitative method for evaluating concrete health using the impact-echo method is established. Through field tests and finite element simulation calculations, it is verified that the eigenvalues in the fixed mode are consistent with the predominant frequency measured near the edge region, overcoming the inaccuracy issue of the impact-echo method in detecting the edge area of concrete members. The impact-echo method can be better utilized for non-destructive testing of concrete members.
APPLIED SCIENCES-BASEL
(2023)
Article
Optics
Jingyi Wang, Xingyu Su, Tong Liu, Ling Hong, Haoxu Guo, Xiaodong Qiu, Yuan Ren, Lixiang Chen
Summary: In recent years, there has been an increasing research interest in the rotational Doppler effect associated with the orbital angular momentum of light, which has emerged as a powerful tool for detecting rotating bodies in remote sensing. However, in realistic environments with turbulence, this method faces severe limitations as the rotational Doppler signals become unrecognizable amidst background noise. In this study, we propose a concise and efficient method using cylindrical vector beams that enables turbulence-resilient detection of the rotational Doppler effect. By employing a polarization-encoded dual-channel detection system, low-frequency noise caused by turbulence can be individually extracted and subtracted, mitigating the impact of turbulence. Proof-of-principle experiments demonstrate the feasibility of using this scheme to detect rotating bodies in non-laboratory conditions.
Article
Nanoscience & Nanotechnology
S. Adhikari, H. Haddad Khodaparast
Summary: This paper discusses the concept framework of simultaneously sensing the mass and rotary inertia of an object attached to a vibrating cantilever beam, using two vibration modes to obtain closed-form expressions for these parameters.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2021)
Article
Optics
Yong-Hui Zhang, Li-Yan Tang, Jun-Yi Zhang, Ting-Yun Shi
Summary: A series of magic wavelengths for the forbidden transition in helium have been determined through large-scale relativistic configuration interaction calculations, with considerations for finite nuclear mass, relativistic, and QED effects. The measurement of the 1335.55(2)-nm magic wavelength could potentially serve as a test for atomic structure theory.
Article
Computer Science, Interdisciplinary Applications
Cong Du, Pengfei Liu, Yiren Sun, Jingyun Chen, Quan Liu, Markus Oeser
Summary: This study presents a three-dimensional locally homogeneous model for asphalt mixtures, which effectively balances simulating accuracy and computational effort. The model accounts for various aggregate gradations to allow for mesoscale analysis and numerical simulations of asphalt concrete. The models demonstrate the ability to characterize linear viscoelastic performance for various asphalt mixtures and investigate the influence of aggregate particles on mechanical responses.
COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING
(2022)
Article
Engineering, Electrical & Electronic
MohammadSadegh KhajueeZadeh, Hamid Saneie, Zahra Nasiri-Gheidari
Summary: A fast and accurate hybrid model for resolver performance prediction and optimization is proposed in the article, which can improve the position determination accuracy of a resolver.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2021)
Article
Engineering, Multidisciplinary
Kaiyan Huang, Qiang Xu, Qin Ying, Bin Gu, Weifeng Yuan
Summary: This research focuses on wireless strain sensing using multi-walled carbon nanotube/epoxy resin films. The experiments show that these films can respond to wireless electromagnetic excitation by generating induced voltage. Mechanical strain affects the resonant frequencies of the strain gauges, making them suitable for wireless strain detection.
COMPOSITES PART B-ENGINEERING
(2023)
Article
Engineering, Multidisciplinary
Tanmoy Chatterjee, Michael I. Friswell, Sondipon Adhikari, Rajib Chowdhury
Summary: This article aims to minimize computational requirements of meta-model assisted RDO by developing a global two-layered approximation technique. The approach eliminates model building and Monte Carlo simulation, demonstrating the potential to yield robust optimal solutions in real-life applications with minimal computational cost.
ENGINEERING OPTIMIZATION
(2022)
Article
Materials Science, Multidisciplinary
S. K. Singh, A. Banerjee, R. K. Varma, S. Adhikari, S. Das
Summary: This paper presents an analytical study on computing natural frequencies and in-plane deflections caused by static forces in panel walls using various theories. The study emphasizes the unique features of the Micropolar-Cosserat theory and its comparison with finite element analysis for simulating panel behavior.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES
(2022)
Article
Materials Science, Multidisciplinary
Sondipon Adhikari, Arnab Banerjee
Summary: A mechanical approach utilizing inertial amplifiers with cantilever piezoelectric vibration energy harvesters has been proposed to address challenges in harvesting more power from low-frequency and broadband random excitations. Optimal tuning of different parameters of the inertial amplifiers can significantly increase harvested power, allowing for five times more power to be harvested at a 50% lower frequency under harmonic excitation and ten times more power under random broadband excitation.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES
(2022)
Article
Mechanics
S. Mukherjee, S. Adhikari
Summary: The paper proposes an analytical framework to analyze and quantify the elastic properties of two-dimensional hexagonal lattices with curved elements. It is found that curved beam elements significantly increase the flexibility of the lattice and expand the design space. The analytical approach and expressions provided in the paper offer an efficient framework for the analysis and design of curved lattice materials.
COMPOSITE STRUCTURES
(2022)
Article
Mathematics, Applied
Gourav Agrawal, Abhinav Gupta, Rajib Chowdhury, Anupam Chakrabarti
Summary: The study examines a SIMP-based robust topology optimization design for NPR metamaterials under material uncertainty, showing that RTO produces more stable designs with variations ranging from 1.72% to 2.54%, significantly lower than deterministic topology optimization.
FINITE ELEMENTS IN ANALYSIS AND DESIGN
(2022)
Article
Engineering, Mechanical
S. Adhikari, S. Chakraborty
Summary: This paper aims to develop computationally efficient methods for random eigenvalue problems arising in the dynamics of multi-degree-of-freedom systems, by projecting random eigenvectors onto the basis spanned by deterministic eigenvectors and simplifying the overall approach using an iterative technique.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2022)
Article
Materials Science, Multidisciplinary
V Gupta, B. Bhattacharya, S. Adhikari
Summary: This study presents a lattice-based hourglass metastructure with excellent mechanical properties and energy absorption capacity. The uniaxial compressive response and energy absorption capacity of this structure were investigated through theoretical, simulation, and experimental methods. The results show that the auxetic-based hourglass structure has the highest energy absorption efficiency.
EXPERIMENTAL MECHANICS
(2022)
Article
Engineering, Mechanical
S. Adhikari, S. Mukherjee
Summary: This paper proposes an analytical method based on Castigliano's approach to obtain the exact closed-form expression of the stiffness matrix for beams with stochastic distributed parameters. It is shown that the conventional stochastic element stiffness matrix is a first-order perturbation approximation to the exact expression.
PROBABILISTIC ENGINEERING MECHANICS
(2022)
Article
Engineering, Civil
Sudip Chowdhury, Arnab Banerjee, Sondipon Adhikari
Summary: This paper studies the optimal design of inertial amplifier base isolators (IABI) for mitigating the dynamic response of multi-storey buildings under base excitations. The H-2 optimization method is used to obtain closed-form expressions for the optimal design parameters of IABI. The effectiveness of these expressions is evaluated by comparing the frequency and time domain responses of isolated structures to those of uncontrolled structures. The results show that the response reduction capacity of the optimal inertial amplifier base isolator is increased by 50% to 60% compared to traditional base isolators.
INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS
(2023)
Article
Instruments & Instrumentation
A. Singh, T. Mukhopadhyay, S. Adhikari, B. Bhattacharya
Summary: This paper proposes a novel hybrid lattice structure that allows contactless active modulation of Young's modulus and Poisson's ratio. By incorporating magnetostrictive patches, the mechanical properties of the lattice structure can be controlled remotely using a magnetic field. The study reveals that extreme on-demand modulation of Young's modulus and Poisson's ratio is achievable by controlling the magnetic field.
SMART MATERIALS AND STRUCTURES
(2022)
Article
Engineering, Mechanical
Sudip Chowdhury, Arnab Banerjee, Sondipon Adhikari
Summary: This paper introduces a method of combining negative stiffness devices with inerters to traditional base isolators and tuned mass dampers. The optimal design parameters of these novel passive vibration dampers are derived using H2 and H & INFIN; optimization methods. The results show that the optimized negative stiffness inerter-based base isolators and tuned mass dampers outperform traditional base isolators and tuned mass dampers in terms of dynamic response reduction capacity.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
(2023)
Article
Acoustics
Sudip Chowdhury, Arnab Banerjee, Sondipon Adhikari
Summary: This paper introduces the inertial amplifier viscoelastic tuned mass dampers (IAVTMD) and presents the mathematical formulations for optimal design parameters. The dynamic response reduction capacity of IAVTMD is significantly superior to conventional tuned mass dampers, with an improvement ranging from 20.87% to 26.47% for H-2 optimization and 15.48% for H-8 optimization. In addition, the optimized IAVTMD outperforms tuned mass damper inerters (TMDI) with improved dynamic response reduction capacity by 6.94% for H-2 optimization and 23.29% for H-8 optimization. The closed-form expressions for optimal design parameters are effective for practical applications.
JOURNAL OF VIBRATION AND CONTROL
(2023)
Article
Mechanics
Sudip Chowdhury, Arnab Banerjee, Sondipon Adhikari
Summary: This article introduces the concepts of additional inerter-based viscoelastic mass dampers (AIVMD) and additional viscoelastic mass damper inerters (AVMDI). H-2 and H-infinity optimization schemes are used to derive the optimal closed-form solutions for these dampers analytically. A parametric study is conducted to investigate the sensitivity of the optimal design parameters with other system parameters. The results suggest that higher damper mass ratio, inerter mass ratio, and stiffness ratio are recommended for designing optimal novel dampers with robust vibration reduction capacities.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES
(2023)
Article
Engineering, Civil
Sudip Chowdhury, Arnab Banerjee, Sondipon Adhikari
Summary: This paper introduces the design of negative stiffness inerter-based base isolators, which enhance the dynamic response reduction capacity of conventional base isolators by installing negative stiffness devices and inerters. These novel isolators have been installed at the base of multi-storey buildings to mitigate their dynamic responses during vibration.
Article
Nanoscience & Nanotechnology
Spyridon G. Kosionis, Emmanuel Paspalakis
Summary: In this study, we theoretically investigate the pump-probe response and the four-wave mixing spectrum in a hybrid system composed of a semiconductor quantum dot and a spherical metal nanoparticle. Using a density matrix methodology, we calculate the absorption/gain, dispersion, and four-wave mixing spectra, and analyze their spectral characteristics. We also apply the metastate theory and the dressed-state picture to predict the positions of the spectral resonances.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
L. S. Lima
Summary: This study investigates quantum correlation and entanglement in the non-Hermitian Hubbard model. By analyzing quantum entanglement measures such as entanglement negativity and entropy, the effect of non-Hermitian imaginary hopping on the system is explored. It is found that in the large... limit, the non-Hermiticity reverses the behavior of the ground state energy and low-lying excitations.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Nam-Chol Ri, Chung-Sim Kim, Sang-Ryol Ri, Su-Il Ri
Summary: By decreasing the lattice thermal conductivity of GNR through chemical derivation and strain, enhancing the thermoelectric properties of the electron part can be an important method to approach PGEC. This paper proposes synthesized hybrid systems formed by chemical derivation in the middle parts of b-AGNRs, and investigates the band structures and thermoelectric properties of the electron part under different strains. The results show that the band gaps of the systems significantly increase under different strains.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Le T. T. Phuong, Tran Cong Phong
Summary: This study investigates the effects of gas molecules adsorbed on /312-borophene on its electronic heat capacity and thermal Schottky anomaly. The results show that the adsorbed gas molecules have different impacts on the electronic heat capacity, leading to the generation of various new energy levels.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Tianyan Jiang, Jie Fang, Wentao Zhang, Maoqiang Bi, Xi Chen, Junsheng Chen
Summary: This paper investigates the adsorption and sensing properties of transition metal-doped WSSe gas-sensitive devices towards H2, CO, and CO2 gases related to thermal runaway in Li-ion batteries using density functional theory. The results show that Ti, Mn, and Mo dopants preferentially bind to the S-surface of the WSSe monolayer, and all three monolayers exhibit significantly improved sensing characteristics, with chemisorption towards CO. Band structure analysis suggests that the Ti-WSSe monolayer has the potential to be used as a resistive CO detection sensor. Recovery time calculations indicate the reuse capabilities of the gas-sensitive devices. Mn-WSSe monolayer shows potential for H2 detection, while Mo-WSSe monolayer is more suitable for CO2 detection. This work lays the foundation for potential gas-sensitive applications of WSSe monolayer in thermal runaway scenarios, advancing research in gas sensing domains.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Olga A. Alekseeva, Aleksandr A. Naberezhnov, Ekaterina Yu. Koroleva, Aleksandr Fokin
Summary: This study investigates the temperature dependence of crystal structure and dielectric response in a nanocomposite material containing porous glasses and embedded sodium nitrate. The results reveal a crossover point in the temperature dependence of the order parameter of the structural transition in sodium nitrate nanoparticles, as well as a decrease in activation energy of sodium ions hopping conductivity during heating.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Lijun Cheng, Fang Cheng
Summary: This paper investigates the effects of electric and magnetic fields on the Goos-Hanchen (GH) shift in a semi-Dirac system. The results show that the magnitude and direction of the GH shift depend on various factors such as incidence angle, electric barrier height and width, and magnetic field. It is observed that there is a saltus step in GH shifts at the critical magnetic field, which decreases with increased potential barrier thickness. Additionally, the GH shift can be significantly enhanced by applying an electric field in the III region. These findings are important for the development of semi-Dirac based electronic devices.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Alexander K. Fedotov, Uladzislaw E. Gumiennik, Julia A. Fedotova, Janusz Przewoznik, Czeslaw Kapusta
Summary: The study conducted an improved analysis of carrier transport in single-layer graphene and hybrid structures, showing the coexistence of negative and positive contributions in magnetoresistive effect. Various models were used to analyze the dependences on temperature and magnetic field, providing insights into the behavior of electrical resistance in the structures.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Xuhui Peng, Tao Chen, Ruotong Chen, Shizheng Chen, Qing Zhao, Xiaoping Huang
Summary: In this study, a novel method was proposed to design and fabricate optoelectronic devices with highly precise controlled photorefractive liquid crystal structures. By utilizing quantum dots and electric tuning, a regular periodic grating was formed in a quantum dot-doped liquid crystal volume illuminated by a laser standing evanescent wave field. The obtained optical diffraction pattern showed equally spaced light spots and high diffraction efficiency, indicating a significant change in the refractive index of the nanostructured device.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Kai-Hua Yang, Xiao-Hui Liang, Huai-Yu Wang, Yi-Fan Wu, Qian-Qian Yang
Summary: In this work, a theoretical model is proposed to achieve the controllability of quantum interference and decoherence. The effects of intralead Coulomb interaction, interdot tunneling, and electron-phonon interactions on differential conductance are investigated. The results show the appearance of destructive interference, Fano interference, and negative differential conductance in strong dot-lead tunneling regions, while a characteristic pattern of positive and negative differential conductances appears in the weak dot-lead tunneling regime.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Xueying Wang, Qian Ma, Qi Zhang, Yi Wang, Lingyu Li, Dongheng Zhao, Zhiqiang Liu
Summary: Porous double-channel alpha-Fe2O3/SnO2 heterostructures with tunable surface/interface transport mechanism were successfully fabricated by electrospinning and calcination. These heterostructures exhibited a large specific surface area, providing more active sites and enhanced adsorption capacity. The optimal composite materials showed the highest response value and the fastest response/recovery times to DMF, along with good cycling performance, long-term stability, and high gas selectivity.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Donglin Guo, Zhengmeng Xu, Chunhong Li, Kejian Li, Bin Shao, Xianfu Luo, Jianchun Sun, Yilong Ma
Summary: Using full electron-phonon interactions and the Boltzmann transport equation, this study investigates the phonon scattering channel and electrical properties of graphene under anharmonic phonon renormalization (APRN). The results show that the APRN reduces the phonon frequency and three-phonon phase space with increasing temperature, affecting the acoustic branch more than the optical branch. The thermal conductivity of graphene decreases after considering three- and four-phonon scattering, and the primary scattering channels are identified. Furthermore, the APRN increases the strength of electron-phonon coupling and leads to an increase in n-type electric resistance at room temperature.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Hongping Zhao, Man Zhao, Dayong Jiang
Summary: The study proposes a broadband photodetector with high response, high sensitivity, and controllable band by integrating quantum dots and highly conductive materials. The PD composed of ZnO film/PbS quantum dots heterostructure shows excellent photoresponse performance in the UV-Vis-NIR range, with the peak responsivity increased by 550%, accompanied by significant red shift, faster response, and recovery speed. By using RF magnetron sputtering to prepare ultra-thin ZnO film, the impact of PbS quantum dots on the photoelectric properties of ZnO film is comprehensively and systematically discussed.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Ye Xuan Meng, Liwei Jiang, Yisong Zheng
Summary: Manipulating magnetism by electrical means is an effective method for realizing ultra-low power spintronic-integrated circuits. In this study, it is demonstrated that the two-dimensional semiconductor material InO monolayer can be tuned to a half-metallic state by applying a gate voltage, providing theoretical guidance for adjusting two-dimensional magnetic semiconductors.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)
Article
Nanoscience & Nanotechnology
Anusha Kachu, Aalu Boda
Summary: In this research, we investigated the impact of confinement nature on a neutral hydrogenic donor impurity in a quantum dot. The study demonstrated intriguing behavior in response to changes in potential shape, quantum dot parameters, and spin-orbit coupling strengths. The findings provide valuable insights into the fundamental physics of quantum dots and impurities and can aid in the design and optimization of QD-based technologies.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
(2024)