Effects of Binder on the Properties of Iron Ore-Coal Composite Pellets

Large amounts of fines and superfines are generated in Indian iron ore and coal mines due to mechanized mining and mineral dressing operations. Utilization of these fines for extracting metal is of vital concern for resource utilization and pollution control. For agglomeration of these fines, a suitable binder is required. Iron ore-coal composite pellets were prepared by cold bonding. Various binders such as lime, Ca(OH)2, slaked lime, dextrose, molasses, and sodium polyacrylate (SPA), alone or in combination, were employed for making composite briquettes. The slaked lime-dextrose combination produced the highest strength among the various binders employed for producing composite briquettes and was therefore selected for producing composite pellets for the smelting reduction. In cold bonding, the composite pellets attain the requisite properties due to physico-chemical changes of the binder in ambient conditions. It was possible to obtain a dry strength of more than 300N per pellet in some cases and more than 200N per pellet in many trials. Drop strength and shatter index values of composite pellets were also measured. In the present paper an attempt has been made to evaluate the mechanical properties of cold-bonded composite pellets so as to throw some light on the capacity of these pellets to withstand stresses during handling and transportation.