The effect of cutting fluids applied in metal cutting process

Performance assessment of micro and nano solid lubricant suspensions in vegetable oils during machining

(2014) R Padmini et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Cutting forces and surface roughness in wet machining of Inconel alloy 738 with coated carbide tool

(2014) Behnam Davoodi et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Minimum quantity lubrication-MQL turning of AISI 4140 steel alloy

(2013) Mohammadjafar Hadad et al.   JOURNAL OF CLEANER PRODUCTION

Tool life and wear mechanisms in high speed machining of Ti–6Al–4V alloy with PCD tools under various coolant pressures

(2013) Rosemar B. da Silva et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Nanofluids as a potential solution for Minimum Quantity Lubrication: A review

(2013) RR Srikant et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Evaluation of the effect of application of cutting fluid at high pressure on tool wear during turning operation of AISI 316 austenitic stainless steel

(2013) V.T.G. Naves et al.   WEAR

Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids

(2012) A. Shokrani et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions

(2012) S. Zhang et al.   JOURNAL OF CLEANER PRODUCTION

Evaluation of industrial cutting fluids using electrochemical impedance spectroscopy and multivariate data analysis

(2012) Christian Ulrich et al.   TALANTA

Dry machining of Inconel 718, workpiece surface integrity

(2011) A. Devillez et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Development of ecofriendly/biodegradable lubricants: An overview

(2011) Ponnekanti Nagendramma et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Tool wear analysis in milling of medium carbon steel with coated cemented carbide inserts using different machining lubrication/cooling systems

(2011) R.B. Da Silva et al.   WEAR

Mechanical and physico-chemical study of sulfur additives effect in milling of high strength steel

(2011) Aleksandra Bierla et al.   WEAR

A comparative study on dry milling and little quantity lubricant milling based on vibration signals

(2010) Weiwu Zhong et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Experimental investigation on the performance of nanoboric acid suspensions in SAE-40 and coconut oil during turning of AISI 1040 steel

(2010) P. Vamsi Krishna et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Effect of cooling and lubrication conditions on surface topography and turning process of C45 steel

(2010) Tadeusz Leppert   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Characterisation of friction properties between a laminated carbon fibres reinforced polymer and a monocrystalline diamond under dry or lubricated conditions

(2010) Alexandre Mondelin et al.   TRIBOLOGY INTERNATIONAL

Vegetable oils as a potential cutting fluid—An evolution

(2010) Y.M. Shashidhara et al.   TRIBOLOGY INTERNATIONAL

Experimental estimation of friction force in lubricated cutting of steel

(2010) Anirudhan Pottirayil et al.   WEAR

Computer fluid dynamics analysis for efficient spraying of oil mist in finish-turning of Inconel 718

(2009) Toshiyuki Obikawa et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Effects of coolant pressure on chip formation while turning Ti6Al4V alloy

(2009) Suresh Palanisamy et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Evaluation of near-dry machining effects on gear milling process efficiency

(2009) Domnita Fratila   JOURNAL OF CLEANER PRODUCTION

Effects of cutting fluid application on tool wear in machining: Interactions with tool-coatings and tool surface features

(2009) Anshu D. Jayal et al.   WEAR

Effectiveness and resolution of tests for evaluating the performance of cutting fluids in machining aerospace alloys

(2008) D.A. Axinte et al.   CIRP ANNALS-MANUFACTURING TECHNOLOGY

Performance evaluation of solid lubricants in terms of machining parameters in turning

(2008) P. Vamsi Krishna et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Micro-liter lubrication machining of Inconel 718

(2008) Toshiyuki Obikawa et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Investigation into minimal-cutting-fluid application in high-speed milling of hardened steel using carbide mills

(2008) T. Thepsonthi et al.   INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE

Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel

(2008) M. Anthony Xavior et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Investigation into the use of gaseous and liquid nitrogen as a cutting fluid when turning BS 970-80A15 (En32b) plain carbon steel using WC–Co uncoated tooling

(2008) M. Stanford et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

The effects of various cooling strategies on surface roughness and tool wear during soft materials milling

(2008) B. Yalçın et al.   MATERIALS & DESIGN

Characteristics and treatability of oil-bearing wastes from aluminum alloy machining operations

(2007) Luke Chen et al.   JOURNAL OF HAZARDOUS MATERIALS

Studies on minimum quantity lubrication (MQL) and air cooling at drilling

(2007) B. Tasdelen et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY