Article
Engineering, Environmental
Yaqi Li, Pengjian Zuo, Ningbo Zhang, Xucai Yin, Ruinan Li, Mengxue He, Hua Huo, Yulin Ma, Chunyu Du, YunZhi Gao, Geping Yin
Summary: The novel electrolyte shows excellent reversibility and stability, supporting magnesium deposition and stripping, making it suitable for the sulfur cathode of rechargeable magnesium batteries. Coupled with a copper current collector and magnesium anode, the rechargeable magnesium battery delivers high discharge specific capacity and prolonged cycle life.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Engineering, Environmental
Shaobo Ma, Zhiguo Zhang, Yang Wang, Zhenjiang Yu, Can Cui, Mengxue He, Hua Huo, Geping Yin, Pengjian Zuo
Summary: In this study, iodine-doped sulfurized polyacrylonitrile was prepared using a simple co-heating method and showed excellent electrochemical performance in ester electrolyte. Iodine doping effectively promoted electron and Li+ migration, while the generated cathode electrolyte interface layer enhanced reaction kinetics. Additionally, short-chain oligomers and double bonds in the sulfurized polyacrylonitrile were found to contribute to capacity, leading to good cycling stability.
CHEMICAL ENGINEERING JOURNAL
(2021)
Article
Chemistry, Physical
Lirong Yang, Ziru Niu, Chunmei Wang, Zhigang Liu, Xiaoxin Feng
Summary: Biomass-derived porous carbon/MoO2@TiO2 (LC/MoO2@TiO2) anode materials were prepared via hydrothermal route for lithium-ion batteries (LIBs). Transmission electron microscopy and energy dispersive X-ray spectroscopy of LC/MoO2@TiO2 showed that MoO2 and TiO2 nanoparticles were uniformly embedded in the porous and surface of honeycomb porous carbon (LC). The LC/MoO2@TiO2 anode exhibits excellent rate capability and maintains a stable specific capacity of-600 mAhg-1 at a current density of 100 mAg-1 after 100 cycles. Moreover, at a current density of 500 mAg-1 its reversible capacity can reach 310 mAhg-1 after 250 cycles. Therefore, the structure of MoO2 and TiO2 nanoparticles anchored of a porous LC can not only buffer the volume change during lithiation /delithiation process but also provide more active surface area, and more convenient and efficient channel for lithium-ion transport and storage.
SOLID STATE IONICS
(2023)
Article
Chemistry, Multidisciplinary
Wenli Zhang, Minglei Sun, Jian Yin, Edy Abou-Hamad, Udo Schwingenschlogl, Pedro M. F. J. Costa, Husam N. Alshareef
Summary: Organic anodes, particularly cyclized polyacrylonitrile (cPAN), have shown excellent potential for alkali metal ion batteries, achieving high reversible capacity and displaying unique potential-dependent solid electrolyte interphase formation. The hexagonal carbon ring, piperidine ring, and pyridine nitrogen in ladder cPAN are identified as the main active sites for lithium-ion storage. Additionally, cPAN demonstrates decent performance as an anode in SIBs and PIBs.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
(2021)
Article
Chemistry, Physical
Jian Zhang, Musen Zhou, Jiayan Shi, Yifan Zhao, Xiaoyu Wen, Chi-Cheung Su, Jianzhong Wu, Juchen Guo
Summary: The addition of acrylonitrile (AN) in carbonate-based electrolytes has been reported as an effective method to achieve uniform and dense lithium (Li) deposition and improve the coulombic efficiency of Li metal anodes. The electrochemical, spectroscopic, and theoretical studies show that AN is cathodically electropolymerized on the Li surface, forming a polyacrylonitrile artificial solid electrolyte interface that allows for uniform nucleation and growth of Li deposition with reduced side reactions. The effectiveness of AN additive is demonstrated in Li pouch cells with excellent cycle stability under realistic charge-discharge conditions.
Article
Materials Science, Ceramics
Alberto Z. Fatichi, Mariana G. de Mello, Karina D. Pereira, Luisa G. M. Antonio, Augusto D. Luchessi, Rubens Caram, Alessandra Cremasco
Summary: The electrochemical, structural, and biological properties of self-organized amorphous and anatase/rutile titanium dioxide (TiO2) nanotubes deposited on Ti-35Nb-4Zr alloy through anodization-induced surface modification were investigated. The study found that anatase TiO2 exhibited higher surface corrosion resistance and cell viability compared to amorphous TiO2, indicating the importance of TiO2 nanotube crystallization in the material's electrochemical behavior and biocompatibility.
CERAMICS INTERNATIONAL
(2022)
Review
Chemistry, Multidisciplinary
Sourav Paul, Md Arafat Rahman, Sazzad Bin Sharif, Jin-Hyuk Kim, Safina-E-Tahura Siddiqui, Md Abu Mowazzem Hossain
Summary: This review presents the fabrication methods and electrochemical performance of TiO2 as a viable anode material for lithium-ion batteries. Different nanostructures of TiO2 materials are thoroughly discussed, and clear guidelines on the interconnected relationship between nanostructure morphology and anodic constraints are provided.
Article
Chemistry, Physical
Xianwei Geng, Ruowei Yi, Xiangfei Lin, Chenguang Liu, Yi Sun, Yingchao Zhao, Yinqing Li, Ivona Mitrovic, Rui Liu, Li Yang, Cezhou Zhao
Summary: A high-performance method for preparing lithium-sulfur batteries is proposed, and the batteries fabricated with composite materials exhibit high specific capacity and stable cycle life. The study demonstrates that SWCNT can enhance the conductivity of the composite, while the strong adsorption ability of TiO2 can increase the cycle life of the battery.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Chemistry, Multidisciplinary
Ying Weng, Ziying Zhang, Huizhen Zhang, Yangyang Zhou, Xiaona Zhao, Xingran Xu
Summary: The flower-like SnO2/TiO2 hollow spheres show a large specific surface area and excellent ion migration performance, while the TiO2 and SnO2 structures ensure good cycle stability. Electrochemical measurements confirm their high specific capacity, low irreversible capacity loss, and superior rate performance in lithium-ion batteries.
FRONTIERS IN CHEMISTRY
(2021)
Article
Chemistry, Physical
Thanapat Autthawong, Chawin Yodbunork, Natthakan Ratsameetammajak, Orapim Namsar, Yothin Chimupala, Thapanee Sarakonsri
Summary: The nanostructured Sn(SnO2)/TiO2(B) ultrafast-charging materials exhibit excellent cycling stability and high storage capability, functioning effectively at high current densities with a low transfer resistance and high lithium-ion diffusion coefficient. Additionally, the composite architecture of the electrode allows for fast lithium-ion diffusion and storage, while the stable SEI layer prevents the pulverization and separation of nanoparticles, indicating promising potential as anode materials in future battery applications.
ACS APPLIED ENERGY MATERIALS
(2022)
Article
Chemistry, Analytical
Qinxing Xie, Jingbin Zhang, Peng Zhao
Summary: A functional interlayer consisting of attapulgites and multiwalled carbon nanotubes has been fabricated, showing improved performance in lithium-sulfur batteries. The composite membrane is cost-effective and effective, demonstrating great potential for high performance energy storage applications.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
(2021)
Article
Chemistry, Physical
Qiang Wu, Fenfen Ma, Wei Zhang, Hui Yan, Xin Chen, Shijie Cheng, Jia Xie
Summary: Lithium-sulfur (Li-S) batteries are highly promising high-energy-density secondary batteries due to their ultrahigh energy density and low cost. A dual-functional electrolyte additive, lithium selenide (Li2Se), is proposed to address the challenges faced by Li-SPAN batteries, including sluggish sulfur kinetics and uncontrollable Li deposition. Li2Se improves kinetics by attacking polysulfides and forms a stable selenide-containing organic-inorganic hybrid solid electrolyte interphase (SEI) to enhance Li deposition. The Li2Se-assisted Li-SPAN battery exhibits high discharge capacities, enhanced rate performance, and outstanding cycling stability.
ACS APPLIED ENERGY MATERIALS
(2023)
Article
Chemistry, Physical
Yuan Tian, Xiao Zhang, Yongguang Zhang, Jingde Li, Aizhong Jia, Guihua Liu, Zhumabay Bakenov
Summary: A composite material consisting of Co/TiO2-x@carbon was proposed as a sulfur host to address the shuttle effect and conversion kinetics issues in lithium/sulfur batteries. With oxygen defects, carbon coating, and Co nanoparticles, the electrode exhibited outstanding cycling stability and superior rate performance.
JOURNAL OF ALLOYS AND COMPOUNDS
(2021)
Article
Chemistry, Multidisciplinary
Jiale Wan, Zhuqing Zhao, Hongwei Xie, Huayi Yin, Qiushi Song, Zhiqiang Ning
Summary: A stable silicon/titanium composite electrode was designed through the low-temperature exfoliation of industrial Si-Ca alloy particles with titanium-doped silicon layer. The electrode showed stable surface and outstanding cycling stability and rate performance.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING
(2022)
Article
Chemistry, Multidisciplinary
Hui Zheng, Han-Shu Xu, Jiaping Hu, Huimin Liu, Lianwei Wei, Shusheng Wu, Jin Li, Yuhu Huang, Kaibin Tang
Summary: In this study, nano-sized CoSe2 encapsulated by N-doped reduced graphene oxide (CoSe2@N-rGO) was successfully synthesized using a one-step hydrothermal method. The CoSe2@N-rGO anodes showed high reversible capacity and cycling stability, and the presence of N-doped carbon greatly enhanced the rate performance. Furthermore, the superior electrochemical performance of orthorhombic CoSe2 compared to cubic CoSe2 was discussed.
Article
Electrochemistry
Alejandro Medina, Carlos Perez-Vicente, Ricardo Alcantara
Summary: This study explores the potential of nanostructured spinel materials as electrode materials for sodium batteries, evaluating their electrochemical performance under different conditions. It is found that magnesium can stabilize the spinel framework, while iron can reduce electrolyte decomposition, improving the stability and electrochemical properties of the material. The results suggest new possibilities for reversible intercalation of sodium into oxyspinels.
ELECTROCHIMICA ACTA
(2022)
Article
Materials Science, Ceramics
M. R. D. Bomio, P. Lavela, A. A. G. Santiago, F. V. Motta, J. L. Tirado
Summary: Microwave calcination is proposed as an alternative route to prepare layered P2-Na2/ 3Ni1/3Mn2/3O2 for sodium-ion batteries. The sample obtained under the fastest conditions of a heating ramp of 20 degrees C min-1 for 2 hours showed well-crystallized rounded particles. It exhibited low internal cell resistance and high diffusion coefficients, allowing for the highest capacity at 1 C and maintaining discharge capacity for at least two hundred cycles.
CERAMICS INTERNATIONAL
(2023)
Article
Chemistry, Analytical
Mauricio Bomio, Pedro Lavela, Ricardo Luis Tranquilin, Fabiana Villela da Motta, Jose Luis Tirado
Summary: Microwave calcination is introduced as a substitute for conventional heating in electric furnace for the production of high-performance electrodes for sodium-ion batteries. The microwave annealing process allows for shorter annealing time and the preparation of pure and highly crystalline Mg-doped Na2/3Ni1/3Mn2/3O2 samples. The electrochemical performance of the microwave calcined samples is superior to a reference sample prepared by conventional heating methods, as evidenced by the kinetic response at different stages of galvanostatic cycling. This improvement can be attributed to the larger crystallite size and lower microstrains achieved through microwave annealing, which result in reduced resistive behavior, higher Na+ diffusion coefficient, and lower internal resistance of the positive electrode.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
(2023)
Article
Chemistry, Multidisciplinary
Carlos Perez-Vicente, Saul Rubio, Rafaela Ruiz, Wenhua Zuo, Ziteng Liang, Yong Yang, Gregorio F. Ortiz
Summary: The magnesium driven reaction in the olivine-type MgMn0.5Zn0.5SiO4 structure is investigated through experimental tests and density functional theory (DFT) calculations. Partial replacement of Mn in Oh sites by Zn in the MgMn0.5Zn0.5SiO4 cathode is successfully achieved using a simple sol-gel method. Comparison with the well-known MgMnSiO4 olivine-type structure provides insights into the structure and magnesium extraction/insertion properties of the novel olivine-type (Mg)(M1)(Mn0.5Zn0.5)(M2)SiO4 composition. DFT calculations further extend the study to other divalent elements in the olivine-type (Mg)(M1)(Mn0.5M0.5)(M2)SiO4 structure with M = Fe, Ca, Mg, and Ni. The results suggest that the energy density can be tuned between 520 and 440 W h kg(-1) based on the atomic weight and redox chemistry properties, offering new possibilities for cathode material development in Mg batteries.
Article
Chemistry, Physical
Carlos Perez-Vicente, Alejandro Medina, Ricardo Alcantara
Summary: Perovskite-type titanates have potential applications as solid-state electrolytes and electrode materials in ion batteries, but their composition and structure need to be optimized to enhance ion conductivity and reversible capacity.
ACS APPLIED ENERGY MATERIALS
(2022)
Article
Electrochemistry
Liliana T. Lopez Ch, Alejandro Medina, Franklin Jaramillo, Jorge A. Calderon, Pedro Lavela, Jose L. Tirado
Summary: Sodium-ion battery is a promising technology for energy storage due to the abundance and low cost of sodium. The perovskite structure, with its unique properties such as good ionic mobility, low cost, and easy synthesis, has attracted attention for energy applications. This study explored the use of NaNiF3 nanostructured perovskite as an anode material for sodium-ion battery, achieving a remarkable first discharge capacity of approximately 376 mA h g(-1) with optimized electrode. The ex-situ XRD and electrochemical characterization provided insights into the reaction mechanism and capacitive contribution during discharge.
ELECTROCHIMICA ACTA
(2023)
Article
Chemistry, Multidisciplinary
Carlos Perez-Vicente, Rafaela Ariza, Wenhua Zuo, Yong Yang, Gregorio F. Ortiz
Summary: The insertion of magnesium ions in Mg-cells suppresses the sodium/vacancy ordering and Jahn-Teller effects observed in Na-cells. The Mg-cell exhibits different features from the Na-cell during discharge, suggesting the need for structure engineering on cathode materials to improve cell performance.
Review
Chemistry, Physical
Ricardo Alcantara, Carlos Perez-Vicente, Pedro Lavela, Jose L. Tirado, Alejandro Medina, Radostina Stoyanova
Summary: After a delay of more than 30 years, sodium analogs are now entering the market as an alternative to lithium-ion batteries. These sodium-ion batteries address concerns about sustainability, production costs, safety, and toxicity. The electrode materials of these batteries can contain sodium, iron, or manganese, eliminating the need for cobalt cathode compounds and copper anode current collectors. Manganese, with its multiple oxidation states and abundance, is favored as a component in these batteries. However, further research is needed to explore the role of manganese in different structural families.
Article
Energy & Fuels
Alejandro Medina, Ricardo Alcantara, Jose L. Tirado
Summary: The sulfuric acid pre-treatment of ground coffee grains before carbonization was evaluated as an efficient method to improve the electrochemical performance of carbon materials for Na-ion batteries, resulting in a significant increase in reversible capacity.
JOURNAL OF ENERGY STORAGE
(2023)
Article
Chemistry, Physical
Carlos Perez-Vicente, Ricardo Alcantara
Summary: Developing new and sustainable batteries is crucial for modern society. Anion doping is comprehensively reviewed and investigated as a method to enhance the electrochemical behavior of electrode materials. The use of multiple anions in the same host material can create an energized state, improving the electrochemical performance and potentially benefiting future post-lithium batteries.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS
(2023)
Article
Chemistry, Inorganic & Nuclear
Pedro Lavela, Julia Leyva, Jose Luis Tirado
Summary: The supply of battery-grade nickel for sodium-ion batteries may soon become insufficient. This study focuses on finding new electrode materials with minimal or no use of nickel. The Na0.67Mg0.05Ni0.05Mn0.9O2 sample demonstrates excellent cathode performance, even at low temperatures.
DALTON TRANSACTIONS
(2023)
Article
Chemistry, Physical
Liliana T. Lopez Ch, Franklin Jaramillo, Jorge A. Calderon, Jose L. Tirado, Elena Akhmatskaya, Mauricio R. Bonilla
Summary: This report explores the characterization of ternary phases in the NaCl + FeCl2 system at low and high temperatures using theoretical and experimental methods. The study finds that Na2Fe3Cl8 is the only metastable ternary compound produced, and only at high temperatures. The structure and properties of Na2Fe3Cl8 are described in detail, while other ternary phases, such as Na6FeCl8 and Na2FeCl4, were not observed.
JOURNAL OF ALLOYS AND COMPOUNDS
(2023)
Article
Green & Sustainable Science & Technology
Saul Rubio, Tareque Odoom-Wubah, Qun Li, Jose L. Tirado, Pedro Lavela, Jiale Huang, Gregorio F. Ortiz
Summary: This study aims to utilize shrimp waste to obtain nanoparticulate tin battery electrodes. The use of carbon thermal reduction method proved to be effective in producing shrimp waste-tin electrode materials with superior electrochemical performance.
JOURNAL OF CLEANER PRODUCTION
(2022)