Evaluation of Microstructures and Creep Damages in the HAZ of P91 Steel Weldment

The creep strength of welded joints in high Cr steels decreases due to the formation of Type IV creep damage in heat-affected zones (HAZs) during long-term use at high temperatures. This paper aims to elucidate the processes and mechanisms of Type IV creep damage using Mod.9Cr-1Mo (ASME Grade 91) steel weldments. Long-term creep tests for base metal, simulated fine-grained HAZ, and welded joints were conducted at 550 degrees C, 600 degrees C, and 650 degrees C. Furthermore, creep tests of thick welded joint specimens were interrupted at 0.1, 0.2, 0.5, 0.7, 0.8, and 0.9 of rupture life and damage distributions were measured quantitatively. It was found that creep voids were initiated at an early stage of life inside the specimen thickness and coalesced to form cracks at a later stage of life. Creep damage was observed mostly at 25% below the surface of the plate. Experimental creep damage distributions were compared with computed versions using finite element method and damage mechanics analysis. Both multi-axial stress state and strain concentration in fine-grained HAZ appear to influence the formation and distribution of creep voids.