Removal of model contaminants from water by porous carbons obtained through carbonization of poly(ethylene terephthalate) mixed with some magnesium compounds

Preparation, characterization and Methylene Blue adsorption of phosphoric acid activated carbons from globe artichoke leaves

(2011) M. Benadjemia et al.   FUEL PROCESSING TECHNOLOGY

Effect of some thermally unstable magnesium compounds on the yield of char formed from poly(ethylene terephthalate)

(2011) Jacek Przepiórski et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Study on activated carbon derived from sewage sludge for adsorption of gaseous formaldehyde

(2010) Qingbo Wen et al.   BIORESOURCE TECHNOLOGY

A review of the control of pore structure in MgO-templated nanoporous carbons

(2010) T. Morishita et al.   CARBON

Adsorption isotherm models and properties of SO2 and NO removal by palm shell activated carbon supported with cerium (Ce/PSAC)

(2010) S. Sumathi et al.   CHEMICAL ENGINEERING JOURNAL

Comparative study of the textural characteristics of oil palm shell activated carbon produced by chemical and physical activation for methane adsorption

(2010) Arash Arami-Niya et al.   CHEMICAL ENGINEERING RESEARCH & DESIGN

Equilibrium and kinetic studies of the cationic dye removal capability of a novel biosorbent Tamarindus indica from textile wastewater

(2010) Shooka Khorramfar et al.   COLORATION TECHNOLOGY

Removal of Pb(II) from aqueous solutions using activated carbon from Sea-buckthorn stones by chemical activation

(2010) Sayed Zia Mohammadi et al.   DESALINATION

Preparation of activated carbons from olive-tree wood revisited. I. Chemical activation with H3PO4

(2010) A. Ould-Idriss et al.   FUEL PROCESSING TECHNOLOGY

Preparation of novel activated carbons from H2SO4-Pretreated corncob hulls with KOH activation for quick adsorption of dye and 4-chlorophenol

(2010) Feng-Chin Wu et al.   JOURNAL OF ENVIRONMENTAL MANAGEMENT

Removal of lead from aqueous solution by activated carbon prepared from Enteromorpha prolifera by zinc chloride activation

(2010) Yanhui Li et al.   JOURNAL OF HAZARDOUS MATERIALS

Optimization of production conditions for activated carbons from Tamarind wood by zinc chloride using response surface methodology

(2009) J.N. Sahu et al.   BIORESOURCE TECHNOLOGY

The influence of the process conditions on the characteristics of activated carbons obtained from PET de-polymerisation

(2009) M. Carmen Almazán-Almazán et al.   FUEL PROCESSING TECHNOLOGY

Porous Carbon Obtained by Carbonization of PET Mixed with Basic Magnesium Carbonate: Pore Structure and Pore Creation Mechanism

(2009) Jacek Przepiórski et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Thermal conversion of a novel biomass agricultural residue (vine shoots) into activated carbon using activation with CO2

(2009) J.M. Valente Nabais et al.   JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS

Removal of azo and anthraquinone reactive dyes from industrial wastewaters using MgO nanoparticles

(2009) Gholamreza Moussavi et al.   JOURNAL OF HAZARDOUS MATERIALS

Removal of phenol from aqueous solutions by adsorption onto activated carbon prepared from biomass material

(2008) B.H. Hameed et al.   JOURNAL OF HAZARDOUS MATERIALS

Ethanol removal using activated carbon: Effect of porous structure and surface chemistry

(2008) A. Silvestre-Albero et al.   MICROPOROUS AND MESOPOROUS MATERIALS

Influence of preparation conditions on the characteristics of activated carbons produced in laboratory and pilot scale systems

(2007) Emad N. El Qada et al.   CHEMICAL ENGINEERING JOURNAL

Adsorption of binary mixtures of cationic dyes

(2007) B. Noroozi et al.   DYES AND PIGMENTS