Microstructural evolution of CANDU spacer material Inconel X-750 under in situ ion irradiation

Work on lnconel (R)(1) X-750 spacers removed from CANDU (R)(2) reactors has shown that they become embrittled and there is development of many small cavities within the metal matrix and along grain boundaries. In order to emulate the neutron irradiation induced microstructural changes, heavy ion irradiations (1 MeV Kr2+ ions) were performed while observing the damage evolution using an intermediate voltage electron microscope (IVEM) operating at 200 kV. The irradiations were carried out at various temperatures 60-400 degrees C. The principal strengthening phase, gamma'. was disordered at low doses (similar to 0.06 dpa) during the irradiation. M23C6 carbides were found to be stable up to 5.4 dpa. Lattice defects consisted mostly of stacking fault tetrahedras (SFTs), 1/2 < 1 1 0 > perfect loops and small 1/3 < 1 1 1 > faulted Frank loops. The ratio of SFT number density to loop number density for each irradiation condition was found to be neither temperature nor dose dependent. Under the operation of the ion beam the SET production was very rapid, with no evidence for further growth once formed, indicating that they probably formed as a result of cascade collapse in a single cascade. The number density of the defects was found to saturate at low dose (similar to 0.68 dpa). No cavities were observed regardless of the irradiation temperature between 60 degrees C and 400 degrees C for doses up to 5.4 dpa. In contrast, cavities have been observed after neutron irradiation in the same material at similar doses and temperatures indicating that helium, produce during neutron irradiation, may be essential for the nucleation and growth of cavities. (C) 2013 Elsevier B.V. All rights reserved.