4.2 Article Proceedings Paper

Design of Low Cost Gas Sensor Based on SrTiO3 and BaTiO3 Films

Journal

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
Volume 10, Issue 11, Pages 7236-7238

Publisher

AMER SCIENTIFIC PUBLISHERS
DOI: 10.1166/jnn.2010.2800

Keywords

SrTiO3/BaTiO3; Gas Sensor; Sol-Gel Method

Ask authors/readers for more resources

We have prepared SrTiO3/BaTiO3 multilayer film on alumina substrates by a sol-gel technique and investigated their response for sensing ethanol vapor. The surface morphology of the films were characterized by atomic force microscope (AFM) showing that the grain size of the films increase up to 40 nm as the annealing temperature increased to 1000 degrees C. The ethanol sensors based on SrTiO3/BaTiO3 thin films were fabricated by applying interdigitated gold electrodes by sputtering technique. The ethanol sensing characteristics of SrTiO3/BaTiO3 thin films were quantified by the change in resistance of the sensors when they were exposed to ethanol. The optimum operating tempearature of these sensors was found to be 350 degrees C. In addition, the film annealed at 1000 degrees C exhibited p-type gas sensing behavior with the best sensitivity of 30-100 for low ethanol concentration in the range of 100-1000 ppm.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.2
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

Article Chemistry, Inorganic & Nuclear

Electronic Energy Transduction from {Ru(py)4} Chromophores to Cr(III) Luminophores

Alejandro Cadranel, Paola S. Oviedo, Pablo Albores, Luis M. Baraldo, Dirk M. Guldi, Jose H. Hodak

INORGANIC CHEMISTRY (2018)

Article Materials Science, Multidisciplinary

Surface Photovoltage Spectroscopy Study of Ultrasonically Sprayed-Aerosol CH3NH3PbI3 Perovskite Crystals

Nakorn Henjongchom, Nopporn Rujisamphan, I-Ming Tang, Thidarat Supasai

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2018)

Article Chemistry, Analytical

Highly selective sub-10 ppm H2S gas sensors based on Ag-doped CaCu3Ti4O12 films

Aukrit Natkaeo, Ditsayut Phokharatkul, Jose H. Hodak, Anurat Wisitsoraat, Satreerat K. Hodak

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Article Chemistry, Multidisciplinary

Cs4PbX6 (X = Cl, Br, I) Nanocrystals: Preparation, Water-Triggered Transformation Behavior, and Anti-Counterfeiting Application

Xiaoya Yu, Linzhong Wu, Huicheng Hu, Min Chen, Yeshu Tan, Di Yang, Qi Pan, Qixuan Zhong, Thidarat Supasai, Qiao Zhang

LANGMUIR (2018)

Article Physics, Applied

Revealing the diffusion of aluminum in organic solar cells

Nopporn Rujisamphan, I-Ming Tang, Thana Sutthibutpong, Vittaya Amornkitbamrung, Thidarat Supasai

JAPANESE JOURNAL OF APPLIED PHYSICS (2019)

Article Chemistry, Physical

Understanding Effects of Cesium in CH(NH2)2PbI3 for Stabilizing CH(NH2)2PbI3/CsPbI3 Interface under UV Illumination

Premjit Limpamanoch, Nopporn Rujisamphan, Pisist Kumnorkaew, Vittaya Amornkitbamrung, I-Ming Tang, Qiao Zhang, Thidarat Supasai

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Materials Science, Multidisciplinary

An Analytical Approach to CH3NH3PbI3 Perovskite Solar Cells Based on Different Hole Transport Materials

Teneng S. Ntia, Thidarat Supasai, I-Ming Tang, Vittaya Amornkitbumrung, Jianyu Yuan, Youyong Li, Thomas Dittrich, Nopporn Rujisamphan

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2019)

Article Chemistry, Multidisciplinary

Enhancing High Humidity Stability of Quasi-2D Perovskite Thin Films through Mixed Cation Doping and Solvent Engineering

Atittaya Naikaew, Pisist Kumnorkaew, Thidarat Supasai, Sujin Suwanna, Rutchapon Hunkao, Toemsak Srikhirin, Pongsakorn Kanjanaboos

CHEMNANOMAT (2019)

Article Chemistry, Inorganic & Nuclear

A Hole Delocalization Strategy: Photoinduced Mixed-Valence MLCT States Featuring Extended Lifetimes

Bruno M. Aramburu-Troselj, Paola S. Oviedo, German E. Pieslinger, Jose H. Hodak, Luis M. Baraldo, Dirk M. Guldi, Alejandro Cadranel

INORGANIC CHEMISTRY (2019)

Article Materials Science, Multidisciplinary

Solar perovskite thin films with enhanced mechanical, thermal, UV, and moisture stability via vacuum-assisted deposition

Kusuma Pinsuwan, Chirapa Boonthum, Thidarat Supasai, Somboon Sahasithiwat, Pisist Kumnorkaew, Pongsakorn Kanjanaboos

JOURNAL OF MATERIALS SCIENCE (2020)

Article Materials Science, Multidisciplinary

Ultrasonically sprayed-on perovskite solar cells-effects of organic cation on defect formation of CH3NH3PbI3 films

Nakorn Henjongchom, Nopporn Rujisamphan, Teneng Stanilius Ntia, Pisist Kumnorkaew, I-Ming Tang, Vittaya Amornkitbumrung, Thidarat Supasai

CURRENT APPLIED PHYSICS (2019)

Article Energy & Fuels

Insights into Recombination Processes from Light Intensity-Dependent Open-Circuit Voltages and Ideality Factors in Planar Perovskite Solar Cells

Non Thongprong, Thidarat Supasai, Youyong Li, I-Ming Tang, Nopporn Rujisamphan

ENERGY TECHNOLOGY (2020)

Article Chemistry, Physical

Preferentially oriented Fe-doped CaCu3Ti4O12 films with high dielectric constant and low dielectric loss deposited on LaAlO3 and NdGaO3 substrates

Suriyong Pongpaiboonkul, Thitima M. Daniels, Jose H. Hodak, Anurat Wisitsoraat, Satreerat K. Hodak

Summary: This study aims to reduce the dielectric loss of CCTO thin films by doping with Fe3+ ions, while maintaining a large dielectric constant. Oriented films with high room temperature dielectric constants and low loss tangent values in the frequency range of 50 Hz-2 MHz were achieved through Fe-doping.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Impact of a Spun-Cast MoOx Layer on the Enhanced Moisture Stability and Performance-Limiting Behaviors of Perovskite Solar Cells

Unyamanee Rosungnern, Pisist Kumnorkaew, Navaphun Kayunkid, Narong Chanlek, Youyong Li, I-Ming Tang, Non Thongprong, Nopporn Rujisamphan, Thidarat Supasai

Summary: MoOx serves as a buffer and hole transport layer in perovskite solar cells, suppressing defects and improving device functionality. The deposition of MoOx directly onto the perovskite leads to a loss in device functionality due to the inversion of photoinduced charge migration behaviors. The addition of MoOx results in lower J-V hysteresis, higher electrical conductivity, and more stable PCE values, with devices retaining over 85% of their initial efficiency.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Modifying morphology and defects of low-dimensional, semi-transparent perovskite thin films via solvent type

Jitprabhat Ponchai, Paphada Kaewurai, Chirapa Boonthum, Kusuma Pinsuwan, Thidarat Supasai, Somboon Sahasithiwat, Pongsakorn Kanjanaboos

RSC ADVANCES (2019)

No Data Available