Size effects on plasticity in high-entropy alloys

Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys

(2018) Christian Haase et al.   ACTA MATERIALIA

Size dependent plasticity and damage response in multiphase body centered cubic high entropy alloys

(2018) Indranil Basu et al.   ACTA MATERIALIA

In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy

(2018) Meimei Wang et al.   ACTA MATERIALIA

Controlled formation of coherent cuboidal nanoprecipitates in body-centered cubic high-entropy alloys based on Al 2 (Ni,Co,Fe,Cr) 14 compositions

(2018) Y. Ma et al.   ACTA MATERIALIA

BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys

(2018) Indranil Basu et al.   ACTA MATERIALIA

Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates

(2018) Y.L. Zhao et al.   SCRIPTA MATERIALIA

Thermo-mechanical response of single-phase face-centered-cubic AlxCoCrFeNi high-entropy alloy microcrystals

(2018) Quan Jiao et al.   Materials Research Letters

Science and technology in high-entropy alloys

(2018) Weiran Zhang et al.   Science China-Materials

Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC Al x CoCrFeNi high entropy alloys

(2017) Jithin Joseph et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Plasticity performance of Al 0.5 CoCrCuFeNi high-entropy alloys under nanoindentation

(2017) Li-ping Yu et al.   JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

Competitive twinning behavior in magnesium and its impact on recrystallization and texture formation

(2017) I. Basu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Serration and noise behaviors in materials

(2017) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Measurement of spatial stress gradients near grain boundaries

(2017) Indranil Basu et al.   SCRIPTA MATERIALIA

Mechanical size effects in a single crystalline equiatomic FeCrCoMnNi high entropy alloy

(2017) R. Raghavan et al.   SCRIPTA MATERIALIA

Dislocation nucleation during nanoindentation in a body-centered cubic TiZrHfNb high-entropy alloy

(2017) Y.X. Ye et al.   SCRIPTA MATERIALIA

The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys

(2017) Y.H. Zhang et al.   SCRIPTA MATERIALIA

Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy

(2017) Zijiao Zhang et al.   Nature Communications

High pressure synthesis of a hexagonal close-packed phase of the high-entropy alloy CrMnFeCoNi

(2017) Cameron L. Tracy et al.   Nature Communications

The BCC/B2 Morphologies in AlxNiCoFeCr High-Entropy Alloys

(2017) Yue Ma et al.   Metals

Local Stress States and Microstructural Damage Response Associated with Deformation Twins in Hexagonal Close Packed Metals

(2017) Indranil Basu et al.   Crystals

Enhanced strength and ductility in a friction stir processing engineered dual phase high entropy alloy

(2017) S. S. Nene et al.   Scientific Reports

Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures

(2016) F. Otto et al.   ACTA MATERIALIA

Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy

(2016) G. Laplanche et al.   ACTA MATERIALIA

Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys

(2016) Dong-Hyun Lee et al.   ACTA MATERIALIA

A precipitation-hardened high-entropy alloy with outstanding tensile properties

(2016) J.Y. He et al.   ACTA MATERIALIA

Elastic and plastic deformations in a high entropy alloy investigated using a nanoindentation method

(2016) D. Wu et al.   INTERMETALLICS

High-entropy alloys: a critical assessment of their founding principles and future prospects

(2016) E. J. Pickering et al.   INTERNATIONAL MATERIALS REVIEWS

Additive Manufacturing of High-Entropy Alloys by Laser Processing

(2016) V. Ocelík et al.   JOM

Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy

(2016) A. Munitz et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The fcc - bcc crystallographic orientation relationship in Al x CoCrFeNi high-entropy alloys

(2016) J.C. Rao et al.   MATERIALS LETTERS

Elastic and plastic properties of as-cast equimolar TiHfZrTaNb high-entropy alloy

(2016) G. Dirras et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off

(2016) Zhiming Li et al.   NATURE

Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi

(2016) E.J. Pickering et al.   SCRIPTA MATERIALIA

Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures

(2016) Bernd Gludovatz et al.   Nature Communications

Self-Similar Random Process and Chaotic Behavior In Serrated Flow of High Entropy Alloys

(2016) Shuying Chen et al.   Scientific Reports

Delayed plasticity during nanoindentation of single-phase CoCrFeMnNi high-entropy alloy

(2016) Q. F. He et al.   Materials Research Letters

Design and tensile properties of a bcc Ti-rich high-entropy alloy with transformation-induced plasticity

(2016) Lola Lilensten et al.   Materials Research Letters

Dislocations and deformation microstructure in a B2-ordered Al28Co20Cr11Fe15Ni26 high-entropy alloy

(2016) Michael Feuerbacher   Scientific Reports

Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy

(2016) Norihiko L. Okamoto et al.   Scientific Reports

Ab initio thermodynamics of the CoCrFeMnNi high entropy alloy: Importance of entropy contributions beyond the configurational one

(2015) Duancheng Ma et al.   ACTA MATERIALIA

Design of a twinning-induced plasticity high entropy alloy

(2015) Y. Deng et al.   ACTA MATERIALIA

Twin recrystallization mechanisms in magnesium-rare earth alloys

(2015) I. Basu et al.   ACTA MATERIALIA

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

(2015) B. Schuh et al.   ACTA MATERIALIA

Accelerated exploration of multi-principal element alloys for structural applications

(2015) O.N. Senkov et al.   CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY

Nanomechanical Behavior of CoCrFeMnNi High-Entropy Alloy

(2015) Sanghita Mridha et al.   JOM

Physical Metallurgy of High-Entropy Alloys

(2015) Jien-Wei Yeh   JOM

Plastic Deformation of Al0.3CoCrFeNi and AlCoCrFeNi High-Entropy Alloys Under Nanoindentation

(2015) Zhi-Ming Jiao et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Microstructural investigation of plastically deformed Ti20Zr20Hf20Nb20Ta20 high entropy alloy by X-ray diffraction and transmission electron microscopy

(2015) G. Dirras et al.   MATERIALS CHARACTERIZATION

Twinning effects in deformed and annealed magnesium–neodymium alloys

(2015) C. Drouven et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Fine-scale precipitation in the high-entropy alloy Al 0.5 CrFeCoNiCu

(2015) E.J. Pickering et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the room temperature deformation mechanisms of a TiZrHfNbTa refractory high-entropy alloy

(2015) J.-Ph. Couzinié et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization

(2015) Zhi Tang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Nanoindentation characterised plastic deformation of a Al0.5CoCrFeNi high entropy alloy

(2015) Z. M. Jiao et al.   MATERIALS SCIENCE AND TECHNOLOGY

Rapid precipitation in an Al0.5CrFeCoNiCu high entropy alloy

(2015) N. G. Jones et al.   MATERIALS SCIENCE AND TECHNOLOGY

Critical Assessment 14: High entropy alloys and their development as structural materials

(2015) D. B. Miracle   MATERIALS SCIENCE AND TECHNOLOGY

High-Entropy Alloys in Hexagonal Close-Packed Structure

(2015) M. C. Gao et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi

(2015) ZiJiao Zhang et al.   Nature Communications

Ultrastrong ductile and stable high-entropy alloys at small scales

(2015) Yu Zou et al.   Nature Communications

Accelerated exploration of multi-principal element alloys with solid solution phases

(2015) O.N. Senkov et al.   Nature Communications

Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy

(2015) Louis J. Santodonato et al.   Nature Communications

Experiments and Model for Serration Statistics in Low-Entropy, Medium-Entropy, and High-Entropy Alloys

(2015) Robert Carroll et al.   Scientific Reports

Triggering rare earth texture modification in magnesium alloys by addition of zinc and zirconium

(2014) I. Basu et al.   ACTA MATERIALIA

On the entropic stabilisation of an Al0.5CrFeCoNiCu high entropy alloy

(2014) N.G. Jones et al.   INTERMETALLICS

Temperature Effects on Deformation and Serration Behavior of High-Entropy Alloys (HEAs)

(2014) J. Antonaglia et al.   JOM

Nanoindentation deformation of a bi-phase AlCrCuFeNi2 alloy

(2014) Yuan Sun et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Phase equilibria of an Al 0.5 CrFeCoNiCu High Entropy Alloy

(2014) N.G. Jones et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

A fracture-resistant high-entropy alloy for cryogenic applications

(2014) B. Gludovatz et al.   SCIENCE

High-Entropy Alloys: A Critical Review

(2014) Ming-Hung Tsai et al.   Materials Research Letters

Hexagonal High-entropy Alloys

(2014) Michael Feuerbacher et al.   Materials Research Letters

Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy

(2013) C. Zhu et al.   ACTA MATERIALIA

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys

(2013) F. Otto et al.   ACTA MATERIALIA

Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography

(2013) K.G. Pradeep et al.   ACTA MATERIALIA

Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy

(2013) Yu Zou et al.   ACTA MATERIALIA

Tensile properties of high- and medium-entropy alloys

(2013) A. Gali et al.   INTERMETALLICS

Alloy Design Strategies and Future Trends in High-Entropy Alloys

(2013) Jien-Wei Yeh   JOM

Mechanical properties of the high-entropy alloy Ag0.5CoCrCuFeNi at temperatures of 4.2–300 K

(2013) M. A. Laktionova et al.   LOW TEMPERATURE PHYSICS

Structural stability of NiCoFeCrAlxhigh-entropy alloy fromab initiotheory

(2013) Fuyang Tian et al.   PHYSICAL REVIEW B

Microstructures and properties of high-entropy alloys

(2013) Yong Zhang et al.   PROGRESS IN MATERIALS SCIENCE

Effects of Al addition on the microstructure and mechanical property of AlxCoCrFeNi high-entropy alloys

(2012) Woei-Ren Wang et al.   INTERMETALLICS

Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy

(2012) O. N. Senkov et al.   JOURNAL OF MATERIALS SCIENCE

Heterogeneous deformation in twinning-induced plasticity steel

(2012) B.C. De Cooman et al.   SCRIPTA MATERIALIA

Phase separation in equiatomic AlCoCrFeNi high-entropy alloy

(2012) A. Manzoni et al.   ULTRAMICROSCOPY

Alloying behavior in multi-component AlCoCrCuFe and NiCoCrCuFe high entropy alloys

(2011) S. Praveen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Size Effects and Stochastic Behavior of Nanoindentation Pop In

(2011) J. R. Morris et al.   PHYSICAL REVIEW LETTERS

Plasticity in small-sized metallic systems: Intrinsic versus extrinsic size effect

(2011) Julia R. Greer et al.   PROGRESS IN MATERIALS SCIENCE

Determining the activation energies and slip systems for dislocation nucleation in body-centered cubic Mo and face-centered cubic Ni single crystals

(2011) L. Wang et al.   SCRIPTA MATERIALIA

Refractory high-entropy alloys

(2010) O.N. Senkov et al.   INTERMETALLICS

Clarity through complexity

(2010) Jean-Marie Dubois   NATURE MATERIALS

Investigation of strain-induced martensitic transformation in metastable austenite using nanoindentation

(2010) T.-H. Ahn et al.   SCRIPTA MATERIALIA

Micromechanical Model for Deformation in Solids with Universal Predictions for Stress-Strain Curves and Slip Avalanches

(2009) Karin A. Dahmen et al.   PHYSICAL REVIEW LETTERS