Synthesis strategies for improving the performance of doped-BaZrO3 materials in solid oxide fuel cell applications

Vapor Diffusion Sol-Gel Synthesis of Fluorescent Perovskite Oxide Nanocrystals

(2012) Federico A. Rabuffetti et al.   ADVANCED MATERIALS

Effect of anode functional layer on the performance of proton-conducting solid oxide fuel cells (SOFCs)

(2012) Lei Bi et al.   ELECTROCHEMISTRY COMMUNICATIONS

Electrochemical performance of spin coated dense BaZr0.80Y0.16Zn0.04O3-δ membranes

(2012) Igor Luisetto et al.   JOURNAL OF POWER SOURCES

Towards the Next Generation of Solid Oxide Fuel Cells Operating Below 600 °C with Chemically Stable Proton-Conducting Electrolytes

(2011) Emiliana Fabbri et al.   ADVANCED MATERIALS

Sinteractive anodic powders improve densification and electrochemical properties of BaZr0.8Y0.2O3−δ electrolyte films for anode-supported solid oxide fuel cells

(2011) Lei Bi et al.   Energy & Environmental Science

High-performance composite cathodes with tailored mixed conductivity for intermediate temperature solid oxide fuel cells using proton conducting electrolytes

(2011) Emiliana Fabbri et al.   Energy & Environmental Science

Role of solid oxidefuel cells in a balanced energy strategy

(2011) Eric D. Wachsman et al.   Energy & Environmental Science

Anode Supported Protonic Solid Oxide Fuel Cells Fabricated Using Electrophoretic Deposition

(2011) M. Zunic et al.   Fuel Cells

Influence of Pr substitution on defects, transport, and grain boundary properties of acceptor-doped BaZrO3

(2011) Anna Magrasó et al.   INTERNATIONAL JOURNAL OF HYDROGEN ENERGY

Viscoelastic sigmoid anomalies in BaZrO3–BaTiO3 near phase transformations due to negative stiffness heterogeneity

(2011) Liang Dong et al.   JOURNAL OF MATERIALS RESEARCH

Structure, chemical stability and mixed proton–electron conductivity in BaZr0.9−xPrxGd0.1O3−δ

(2011) Anna Magrasó et al.   JOURNAL OF POWER SOURCES

Electrochemical Properties and Intermediate-Temperature Fuel Cell Performance of Dense Yttrium-Doped Barium Zirconate with Calcium Addition

(2011) Ziqi Sun et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

BaZr0.8Y0.2O3−δ-NiO Composite Anodic Powders for Proton-Conducting SOFCs Prepared by a Combustion Method

(2011) Lei Bi et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Lowering the Temperature of Solid Oxide Fuel Cells

(2011) E. D. Wachsman et al.   SCIENCE

Tailoring mixed proton-electronic conductivity of BaZrO3 by Y and Pr co-doping for cathode application in protonic SOFCs

(2011) Emiliana Fabbri et al.   SOLID STATE IONICS

Sinteractivity, proton conductivity and chemical stability of BaZr0.7In0.3O3-δ for solid oxide fuel cells (SOFCs)

(2011) Lei Bi et al.   SOLID STATE IONICS

Electrode tailoring improves the intermediate temperature performance of solid oxide fuel cells based on a Y and Pr co-doped barium zirconate proton conducting electrolyte

(2011) Emiliana Fabbri et al.   RSC Advances

Chemically Stable Pr and Y Co-Doped Barium Zirconate Electrolytes with High Proton Conductivity for Intermediate-Temperature Solid Oxide Fuel Cells

(2010) Emiliana Fabbri et al.   ADVANCED FUNCTIONAL MATERIALS

Materials challenges toward proton-conducting oxide fuel cells: a critical review

(2010) Emiliana Fabbri et al.   CHEMICAL SOCIETY REVIEWS

Chemically stable anode-supported solid oxide fuel cells based on Y-doped barium zirconate thin films having improved performance

(2010) Daniele Pergolesi et al.   ELECTROCHEMISTRY COMMUNICATIONS

A novel single chamber solid oxide fuel cell based on chemically stable thin films of Y-doped BaZrO3 proton conducting electrolyte

(2010) Emiliana Fabbri et al.   Energy & Environmental Science

A novel ionic diffusion strategy to fabricate high-performance anode-supported solid oxidefuel cells (SOFCs) with proton-conducting Y-doped BaZrO3films

(2010) Lei Bi et al.   Energy & Environmental Science

Electrochemical Properties of PSFC-BCYb Composites as Cathodes for Proton Conducting Solid Oxide Fuel Cells

(2010) V. B. Vert et al.   Fuel Cells

Defect chemistry and proton-dopant association in BaZrO3 and BaPrO3

(2010) Stephen J. Stokes et al.   JOURNAL OF MATERIALS CHEMISTRY

Cation non-stoichiometry in yttrium-doped barium zirconate: phase behavior, microstructure, and proton conductivity

(2010) Yoshihiro Yamazaki et al.   JOURNAL OF MATERIALS CHEMISTRY

Solid-state reactive sintering mechanism for large-grained yttrium-doped barium zirconate proton conducting ceramics

(2010) Jianhua Tong et al.   JOURNAL OF MATERIALS CHEMISTRY

Layered perovskite PrBa0.5Sr0.5Co2O5+δ as high performance cathode for solid oxide fuel cells using oxide proton-conducting electrolyte

(2010) Fei Zhao et al.   JOURNAL OF POWER SOURCES

Fabrication and performance of a proton-conducting solid oxide fuel cell based on a thin BaZr0.8Y0.2O3−δ electrolyte membrane

(2010) Wenping Sun et al.   JOURNAL OF POWER SOURCES

High proton conduction in grain-boundary-free yttrium-doped barium zirconate films grown by pulsed laser deposition

(2010) Daniele Pergolesi et al.   NATURE MATERIALS

Lowering grain boundary resistance of BaZr0.8Y0.2O3−δwith LiNO3sintering-aid improves proton conductivity for fuel cell operation

(2010) Ziqi Sun et al.   PHYSICAL CHEMISTRY CHEMICAL PHYSICS

Electrode materials: a challenge for the exploitation of protonic solid oxide fuel cells

(2010) Emiliana Fabbri et al.   SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS

Does the increase in Y-dopant concentration improve the proton conductivity of BaZr1−xYxO3−δ fuel cell electrolytes?

(2010) Emiliana Fabbri et al.   SOLID STATE IONICS

Low temperature sintering of Ba(Zr0.8−xCexY0.2)O3−δ using lithium fluoride additive

(2010) C.-L. Tsai et al.   SOLID STATE IONICS

BaZr0.8Y0.2O3−δ electrolyte with and without ZnO sintering aid: Preparation and characterization

(2010) Cheng Peng et al.   SOLID STATE IONICS

Cost-effective solid-state reactive sintering method for high conductivity proton conducting yttrium-doped barium zirconium ceramics

(2010) Jianhua Tong et al.   SOLID STATE IONICS

High Total Proton Conductivity in Large-Grained Yttrium-Doped Barium Zirconate

(2009) Yoshihiro Yamazaki et al.   CHEMISTRY OF MATERIALS

High performance anode-supported intermediate temperature solid oxide fuel cells (IT-SOFCs) with La0.8Sr0.2Ga0.8Mg0.2O3−δ electrolyte films prepared by electrophoretic deposition

(2009) Francesco Bozza et al.   ELECTROCHEMISTRY COMMUNICATIONS

High-performance bilayered electrolyte intermediate temperature solid oxide fuel cells

(2009) Jin Soo Ahn et al.   ELECTROCHEMISTRY COMMUNICATIONS

A novel single phase cathode material for a proton-conducting SOFC

(2009) Zetian Tao et al.   ELECTROCHEMISTRY COMMUNICATIONS

Composite Cathodes for Proton Conducting Electrolytes

(2009) E. Fabbri et al.   Fuel Cells

Characterisation of BaZr0.9Y0.1O3-δPrepared by Three Different Synthesis Methods: Study of the Sinterability and the Conductivity

(2009) S. B. C. Duval et al.   Fuel Cells

Stable BaCe0.7Ti0.1Y0.2O3−δ proton conductor for solid oxide fuel cells

(2009) Kui Xie et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Structural and electrochemical properties of yttrium-doped barium zirconate by addition of CuO

(2009) Dongyun Gao et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Electrophoretic deposition of dense BaCe0.9Y0.1O3−x electrolyte thick-films on Ni-based anodes for intermediate temperature solid oxide fuel cells

(2009) Milan Zunic et al.   JOURNAL OF POWER SOURCES

Proton-conducting solid oxide fuel cells prepared by a single step co-firing process

(2009) Lei Bi et al.   JOURNAL OF POWER SOURCES

ZnO-doped BaZr0.85Y0.15O3−δ proton-conducting electrolytes: Characterization and fabrication of thin films

(2009) Cheng Peng et al.   JOURNAL OF POWER SOURCES

Zirconium doping effect on the performance of proton-conducting BaZryCe0.8−yY0.2O3−δ (0.0≤y≤0.8) for fuel cell applications

(2009) Youmin Guo et al.   JOURNAL OF POWER SOURCES

Influence of anode pore forming additives on the densification of supported BaCe0.7Ta0.1Y0.2O3−δ electrolyte membranes based on a solid state reaction

(2009) Lei Bi et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

The relationship between chemical composition distributions and specific grain boundary conductivity in Y-doped BaZrO3 proton conductors

(2009) Fumitada Iguchi et al.   SOLID STATE IONICS

A wet-chemical route for the preparation of Ni–BaCe0.9Y0.1O3−δ cermet anodes for IT-SOFCs

(2009) Laure Chevallier et al.   SOLID STATE IONICS

A novel anode supported BaCe0.7Ta0.1Y0.2O3−δ electrolyte membrane for proton-conducting solid oxide fuel cell

(2008) Lei Bi et al.   ELECTROCHEMISTRY COMMUNICATIONS

Design and fabrication of a chemically-stable proton conductor bilayer electrolyte for intermediate temperature solid oxide fuel cells (IT-SOFCs)

(2008) Emiliana Fabbri et al.   Energy & Environmental Science

Design of BaZr0.8Y0.2O3–δ Protonic Conductor to Improve the Electrochemical Performance in Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)

(2008) A. D'Epifanio et al.   Fuel Cells

Electrophoretic Deposition of Dense Sr- and Mg-Doped LaGaO3Electrolyte Films on Porous La-Doped Ceria for Intermediate Temperature Solid Oxide Fuel Cells

(2008) F. Bozza et al.   Fuel Cells

A new stable BaCeO3-based proton conductor for intermediate-temperature solid oxide fuel cells

(2008) Kui Xie et al.   JOURNAL OF ALLOYS AND COMPOUNDS

In SituFabrication of a Supported Ba3Ca1.18Nb1.82O9−δMembrane Electrolyte for a Proton-Conducting SOFC

(2008) Lei Bi et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Design of Electroceramics for Solid Oxides Fuel Cell Applications: Playing with Ceria

(2008) Vincenzo Esposito et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Dependence of Dopant Cations on Microstructure and Proton Conductivity of Barium Zirconate

(2008) S. Imashuku et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

Mixed Protonic/Electronic Conductor Cathodes for Intermediate Temperature SOFCs Based on Proton Conducting Electrolytes

(2008) Emiliana Fabbri et al.   JOURNAL OF THE ELECTROCHEMICAL SOCIETY

The synthesis and sintering behaviour of BaZr0.9Y0.1O3−δ powders prepared by spray pyrolysis

(2008) Paul A. Stuart et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Rapid synthesis of submicron crystalline barium zirconate BaZrO3 by precipitation in aqueous basic solution below 100°C

(2008) Frédéric Boschini et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Citrate–nitrate auto-combustion synthesis of perovskite-type nanopowders: A systematic approach

(2008) F. Deganello et al.   JOURNAL OF THE EUROPEAN CERAMIC SOCIETY

Proton conduction and chemical stability of (La0.5Sr0.5)(Mg0.5+yNb0.5−y)O3−δ

(2008) Yuya Kawasaki et al.   MATERIALS RESEARCH BULLETIN

Effect of minor element addition on the electrical properties of BaZr0.9Y0.1O3−δ

(2008) S.B.C. Duval et al.   SOLID STATE IONICS

Introduction of In or Ga as second dopant to BaZr0.9Y0.1O3−δ to achieve better sinterability

(2008) N ITO et al.   SOLID STATE IONICS

Sm0.5Sr0.5CoO3−δ–BaCe0.8Sm0.2O3-δ composite cathodes for proton-conducting solid oxide fuel cells

(2008) Tianzhi Wu et al.   SOLID STATE IONICS

Tailoring the chemical stability of Ba(Ce0.8−xZrx)Y0.2O3−δ protonic conductors for Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFCs)

(2008) E FABBRI et al.   SOLID STATE IONICS

Characterization and sintering of BaZrO3 nanoparticles synthesized through a single-step combustion process

(2007) H. Padma Kumar et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Improvement of cathode–electrolyte interfaces of tubular solid oxide fuel cells by fabricating dense YSZ electrolyte membranes with indented surfaces

(2007) Dehua Dong et al.   JOURNAL OF POWER SOURCES