Construction of porous coating layer and electrochemical performances of the corresponding modified polyethylene separators for lithium ion batteries

Effect of polydopamine surface coating on polyethylene separators as a function of their porosity for high-power Li-ion batteries

(2013) Yunju Lee et al.   ELECTROCHIMICA ACTA

Synthesis of porous Al2O3-PVDF composite separators and their application in lithium-ion batteries

(2013) Huifeng Wang et al.   JOURNAL OF APPLIED POLYMER SCIENCE

Improved thermal and electrochemical performances of PMMA modified PE separator skeleton prepared via dopamine-initiated ATRP for lithium ion batteries

(2013) Jun-Li Shi et al.   JOURNAL OF MEMBRANE SCIENCE

Composition ratio-dependent structural evolution of SiO2/poly(vinylidene fluoride-hexafluoropropylene)-coated poly(ethylene terephthalate) nonwoven composite separators for lithium-ion batteries

(2012) Hyun-Seok Jeong et al.   ELECTROCHIMICA ACTA

Evaporation-induced, close-packed silica nanoparticle-embedded nonwoven composite separator membranes for high-voltage/high-rate lithium-ion batteries: Advantageous effect of highly percolated, electrolyte-philic microporous architecture

(2012) Hyun-Seok Jeong et al.   JOURNAL OF MEMBRANE SCIENCE

Enhanced performance of modified HDPE separators generated from surface enrichment of polyether chains for lithium ion secondary battery

(2012) Jun-Li Shi et al.   JOURNAL OF MEMBRANE SCIENCE

Lithium ion battery separators: Development and performance characterization of a composite membrane

(2012) Xiaosong Huang et al.   JOURNAL OF MEMBRANE SCIENCE

Evaporation-induced self-assembled silica colloidal particle-assisted nanoporous structural evolution of poly(ethylene terephthalate) nonwoven composite separators for high-safety/high-rate lithium-ion batteries

(2012) Jung-Ran Lee et al.   JOURNAL OF POWER SOURCES

A review on the key issues for lithium-ion battery management in electric vehicles

(2012) Languang Lu et al.   JOURNAL OF POWER SOURCES

Mussel-Inspired Polydopamine-Treated Polyethylene Separators for High-Power Li-Ion Batteries

(2011) Myung-Hyun Ryou et al.   ADVANCED MATERIALS

Gel polymer electrolytes based on active PVDF separator for lithium ion battery. I: Preparation and property of PVDF/poly(dimethylsiloxane) blending membrane

(2011) Hao Li et al.   JOURNAL OF MEMBRANE SCIENCE

Preparation of PVdF nanofiber membranes by electrospinning and their use as secondary battery separators

(2011) Kyungho Hwang et al.   JOURNAL OF MEMBRANE SCIENCE

Enhancement of electrochemical and thermal properties of polyethylene separators coated with polyvinylidene fluoride–hexafluoropropylene co-polymer for Li-ion batteries

(2011) Ki Jae Kim et al.   JOURNAL OF POWER SOURCES

Polyimide gel polymer electrolyte-nanoencapsulated LiCoO2 cathode materials for high-voltage Li-ion batteries

(2010) Jang-Hoon Park et al.   ELECTROCHEMISTRY COMMUNICATIONS

Preparation and properties of poly(ethylene oxide) gel filled polypropylene separators and their corresponding gel polymer electrolytes for Li-ion batteries

(2010) Hao Li et al.   ELECTROCHIMICA ACTA

A novel poly(vinylidene fluoride-hexafluoropropylene)/poly(ethylene terephthalate) composite nonwoven separator with phase inversion-controlled microporous structure for a lithium-ion battery

(2010) Hyun-Seok Jeong et al.   JOURNAL OF MATERIALS CHEMISTRY

Preparation of hydrophilic HDPE porous membranes via thermally induced phase separation by blending of amphiphilic PE-b-PEG copolymer

(2010) Chunfang Zhang et al.   JOURNAL OF MEMBRANE SCIENCE

Dry-cast process for synthetic microporous membranes: Physico-chemical analyses through morphological studies

(2010) Quang Trong Nguyen et al.   JOURNAL OF MEMBRANE SCIENCE

Effect of microporous structure on thermal shrinkage and electrochemical performance of Al2O3/poly(vinylidene fluoride-hexafluoropropylene) composite separators for lithium-ion batteries

(2010) Hyun-Seok Jeong et al.   JOURNAL OF MEMBRANE SCIENCE

Close-packed SiO2/poly(methyl methacrylate) binary nanoparticles-coated polyethylene separators for lithium-ion batteries

(2010) Jang-Hoon Park et al.   JOURNAL OF POWER SOURCES

Closely packed SiO2 nanoparticles/poly(vinylidene fluoride-hexafluoropropylene) layers-coated polyethylene separators for lithium-ion batteries

(2010) Hyun-Seok Jeong et al.   JOURNAL OF POWER SOURCES

Close-packed poly(methyl methacrylate) nanoparticle arrays-coated polyethylene separators for high-power lithium-ion polymer batteries

(2010) Jang-Hoon Park et al.   JOURNAL OF POWER SOURCES

The study on methyl methacrylate graft-copolymerized composite separator prepared by pre-irradiation method for Li-ion batteries

(2010) Shudan Li et al.   SURFACE & COATINGS TECHNOLOGY

Effect of phase inversion on microporous structure development of Al2O3/poly(vinylidene fluoride-hexafluoropropylene)-based ceramic composite separators for lithium-ion batteries

(2009) Hyun-Seok Jeong et al.   JOURNAL OF POWER SOURCES

Preparation of a new micro-porous poly(methyl methacrylate)-grafted polyethylene separator for high performance Li secondary battery

(2009) Sung-Jin Gwon et al.   NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS

Effect of the addition of hydrophobic clay on the electrochemical property of polyacrylonitrile/LiClO4 polymer electrolytes for lithium battery

(2009) Y.W. Chen-Yang et al.   POLYMER