Nanostructured membranes based on sulfonated poly(aryl ether sulfone) and silica for fuel-cell applications

Nanostructured sulfonated poly(aryl ether sulfone) (SPSU) membranes were made from SPSU/silica composites through the addition of amorphous, precipitated, and micronized silica particles (Tixosil 333) and short or segmented linear structures. Linear and branched segments of silica were obtained from the in situ reaction of tetraethoxysilane (TEOS) in an SPSU solution through a sol-gel acid-catalyzed process. Different amounts of silica in the SPSU composites were prepared to evaluate their influence on the ionic conductivity, the water and alcohol solution sorption capacities, and the stability in an ethanol medium. The effect of silica (Tixosil) on the conductivity was higher than that of the silica made from TEOS in SPSU composites. The conductivities of the membranes containing 10% Tixosil and 6.6% silica prepared from TEOS were measured at 80 degrees C; their values were 60 and 33 mS/cm, respectively. Furthermore, a membrane made of a silica blend (5% Tixosil and 3% TEOS) in SPSU attained a value of 92 mS/cm, whereas the commercial membrane Nafion 117, used as a reference, had a conductivity of 54 mS/cm measured under the same conditions. All those composites membranes could be used as components in hydrogen fuel cell. However, only the SPSU/2% Tixosil composite could be used in both hydrogen and ethanol direct fuel cells. (C) 2008 Wiley Periodicals, Inc.