Composite Repair in Wind Turbine Blades: An Overview

Experimental Analysis of the Bondline Stress Concentrations to Characterize the Influence of Adhesive Ductility on the Composite Single Lap Joint Strength

(2013) K. B. Katnam et al.   The Journal of Adhesion

Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities

(2013) K.B. Katnam et al.   PROGRESS IN AEROSPACE SCIENCES

Testing, inspecting and monitoring technologies for wind turbine blades: A survey

(2013) Bin Yang et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Progress and recent trends of wind energy technology

(2013) M.R. Islam et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Three-dimensional failure criteria for fiber-reinforced laminates

(2012) G. Catalanotti et al.   COMPOSITE STRUCTURES

Composite materials for wind energy applications: micromechanical modeling and future directions

(2012) Leon Mishnaevsky   COMPUTATIONAL MECHANICS

Reliability analysis of adhesive bonded scarf joints

(2012) A. Kimiaeifar et al.   ENGINEERING STRUCTURES

Investigating tensile behaviour of toughened epoxy paste adhesives using circumferentially notched cylindrical bulk specimens

(2012) K.B. Katnam et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Probabilistic assessment of the structural failure of single-lap bonded joints

(2012) J. Díaz et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Review of structural health and cure monitoring techniques for large wind turbine blades

(2012) P.J. Schubel et al.   RENEWABLE ENERGY

Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing

(2011) J. LLorca et al.   ADVANCED MATERIALS

The detection of aeronautical defects in situ on composite structures using Non Destructive Testing

(2011) Christian Garnier et al.   COMPOSITE STRUCTURES

Tensile strength of two-part epoxy paste adhesives: Influence of mixing technique and micro-void formation

(2011) K.B. Katnam et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Characterising pre-preg and non-crimp-fabric composite single lap bonded joints

(2011) K.B. Katnam et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Static and Fatigue Failures of Adhesively Bonded Laminate Joints in Moist Environments

(2011) K. B. Katnam et al.   INTERNATIONAL JOURNAL OF DAMAGE MECHANICS

A study on curing processes and environmental effects for rapid composite repair

(2011) Faruk Elaldi et al.   JOURNAL OF REINFORCED PLASTICS AND COMPOSITES

Materials Challenges in Present and Future Wind Energy

(2011) Brian Hayman et al.   MRS BULLETIN

Evolution of industrial laser-ultrasonic systems for the inspection of composites

(2011) Marc Dubois et al.   Nondestructive Testing and Evaluation

The wind energy (r)evolution: A short review of a long history

(2011) John K. Kaldellis et al.   RENEWABLE ENERGY

Void formation in composite prepregs – Effect of dissolved moisture

(2010) L.K. Grunenfelder et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Strain-rate-dependent failure criteria for composites

(2010) I.M. Daniel et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Feasibility of monitoring large wind turbines using photogrammetry

(2010) Muammer Ozbek et al.   ENERGY

Defect distribution and reliability assessment of wind turbine blades

(2010) Henrik Stensgaard Toft et al.   ENGINEERING STRUCTURES

Applications of laser tapping and laser ultrasonics to aerospace composite structures

(2010) A Blouin et al.   INSIGHT

Impact damage detection on composites using optical NDT techniques

(2010) J Gryzagoridis et al.   INSIGHT

Why offshore wind energy?

(2010) M. Dolores Esteban et al.   RENEWABLE ENERGY

Detecting barely visible impact damage detection on aircraft composites structures

(2009) U. Polimeno et al.   COMPOSITE STRUCTURES

Micrographic studies on adhesively bonded scarf repairs to thick composite aircraft structure

(2009) B. Whittingham et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Structural collapse of a wind turbine blade. Part A: Static test and equivalent single layered models

(2009) L.C.T. Overgaard et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Sandwich Materials for Wind Turbine Blades — Present and Future

(2009) Ole Thybo Thomsen   JOURNAL OF SANDWICH STRUCTURES & MATERIALS

Review and comparison of shearography and active thermography for nondestructive evaluation

(2009) Y.Y. Hung et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

A brief status on condition monitoring and fault diagnosis in wind energy conversion systems

(2009) Y. Amirat et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Mechanical properties and styrene emission levels of a UV-cured glass-fibre/vinylester composite

(2008) P. Compston et al.   COMPOSITE STRUCTURES

Review of methodologies for composite material modelling incorporating failure

(2008) A.C. Orifici et al.   COMPOSITE STRUCTURES

Benchmarking shearographic NDT for composites

(2008) J Gryzagoridis et al.   INSIGHT

Joint strength optimization by the mixed-adhesive technique

(2008) Lucas F.M. da Silva et al.   INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

Joint Strength Optimization of Adhesively Bonded Patches

(2008) E. A. S. Marques et al.   The Journal of Adhesion

Structural health monitoring for a wind turbine system: a review of damage detection methods

(2008) Chia Chen Ciang et al.   MEASUREMENT SCIENCE and TECHNOLOGY

The economics of wind energy

(2008) María Isabel Blanco   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Fibre Bragg gratings in structural health monitoring—Present status and applications

(2008) Mousumi Majumder et al.   SENSORS AND ACTUATORS A-PHYSICAL

On the design methodology of scarf repairs to composite laminates

(2007) Chun H. Wang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Condition monitoring and fault detection of wind turbines and related algorithms: A review

(2007) Z. Hameed et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS