- Home
- Publications
- Publication Search
- Publication Details
Title
Friction stir welded structural materials: beyond Al-alloys
Authors
Keywords
-
Journal
INTERNATIONAL MATERIALS REVIEWS
Volume 56, Issue 1, Pages 1-48
Publisher
Informa UK Limited
Online
2011-01-19
DOI
10.1179/095066010x12777205875750
References
Ask authors/readers for more resources
Related references
Note: Only part of the references are listed.- A new fixture for FSW processes of titanium alloys
- (2010) L. Fratini et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Corrosion properties of friction–stir processed cast NiAl bronze
- (2010) D.R. Ni et al. CORROSION SCIENCE
- Tensile properties of friction stir welded and friction stir welded-superplastically formed Ti–6Al–4V butt joints
- (2010) M. Ramulu et al. MATERIALS & DESIGN
- An assessment of microstructure, hardness, tensile and impact strength of friction stir welded ferritic stainless steel joints
- (2010) A.K. Lakshminarayanan et al. MATERIALS & DESIGN
- Tensile properties and strain-hardening behavior of double-sided arc welded and friction stir welded AZ31B magnesium alloy
- (2010) S.M. Chowdhury et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Investigation of welding parameter dependent microstructure and mechanical properties in friction stir welded pure Ti joints
- (2010) Hidetoshi Fujii et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Development of grain structure during friction stir welding of pure titanium
- (2009) S. Mironov et al. ACTA MATERIALIA
- Frictional wear evaluation of WC–Co alloy tool in friction stir spot welding of low carbon steel plates
- (2009) D.H. Choi et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Friction stir welding of aluminium alloys
- (2009) P L Threadgill et al. INTERNATIONAL MATERIALS REVIEWS
- Effect of rotation speed on microstructure and mechanical properties of Ti–6Al–4V friction stir welded joints
- (2009) L. Zhou et al. MATERIALS & DESIGN
- Microstructural characteristics and mechanical properties of friction stir welded joints of Ti–6Al–4V titanium alloy
- (2009) H.J. Liu et al. MATERIALS & DESIGN
- Inhomogeneous microstructure and mechanical properties of friction stir processed NiAl bronze
- (2009) D.R. Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of friction stir welded AA6063–B4C metal matrix composites
- (2009) X.-G. Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of heat input on tensile properties and fracture behavior of friction stir welded Mg–3Al–1Zn alloy
- (2009) J. Yang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Partial recrystallization in the nugget zone of friction stir welded dual-phase Cu–Zn alloy
- (2009) G.M. Xie et al. PHILOSOPHICAL MAGAZINE
- Friction stir welding of steels: process design through continuum based FEM model
- (2009) G. Buffa et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of contamination on microstructure in friction stir spot welded DP590 steel
- (2009) R. Ohashi et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Conventional and bobbin friction stir welding of 12% chromium alloy steel using composite refractory tool materials
- (2009) W. M. Thomas et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of friction stir welding conditions on properties and microstructures of high strength automotive steel
- (2009) M. P. Miles et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction stir welding of hypereutectoid steel (SK5) below eutectoid temperature
- (2009) Y. D. Chung et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Evaluation of microstructure and properties in friction stir welded superaustenitic stainless steel
- (2009) Y. S. Sato et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Microstructural and mechanical characterisation of friction stir welded 15-5PH steel
- (2009) T. Weinberger et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Friction stir processing of 316L stainless steel plate
- (2009) Y. C. Chen et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of tool rotation rate on microstructure and mechanical properties of friction stir welded copper
- (2009) H. J. Liu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Investigation of microstructure, surface and subsurface characteristics in titanium alloy friction stir welds of varied thicknesses
- (2009) P. D. Edwards et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Critical assessment: friction stir welding of steels
- (2009) H. K. D. H. Bhadeshia et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Effect of friction stir processing tool probe on fabrication of SiC particle reinforced composite on aluminium surface
- (2009) E. R. I. Mahmoud et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Improved process stability during friction stir welding of 5 cm thick copper canisters through shoulder geometry and parameter studies
- (2009) L. Cederqvist et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Texture development in the stir zone of near-α titanium friction stir welds
- (2009) K.E. Knipling et al. SCRIPTA MATERIALIA
- Microstructural evolution mechanism of hydrogenated Ti–6Al–4V in the friction stir welding and post-weld dehydrogenation process
- (2009) H.J. Liu et al. SCRIPTA MATERIALIA
- The stir zone microstructure and its formation mechanism in Ti–6Al–4V friction stir welds
- (2009) L. Zhou et al. SCRIPTA MATERIALIA
- Microstructure, texture and residual stress in a friction-stir-processed AZ31B magnesium alloy
- (2008) W. Woo et al. ACTA MATERIALIA
- Friction stir welding of AZ31 magnesium alloy rolled sheets: Influence of processing parameters
- (2008) L. Commin et al. ACTA MATERIALIA
- Effect of microstructural evolution on mechanical properties of friction stir welded AA2009/SiCp composite
- (2008) A FENG et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Residual stress effects on fatigue crack growth in a Ti-6Al-4V friction stir weld
- (2008) S. PASTA et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Friction Stir Weldability of High Tensile Strength Mg-Zn-Al-Ca-La Magnesium Alloy Consisted of Fine Grain
- (2008) Naotsugu Yamamoto et al. JOURNAL OF THE JAPAN INSTITUTE OF METALS
- Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy
- (2008) X. Cao et al. MATERIALS & DESIGN
- Grain boundary misorientation and texture development in friction stir welded SiCp/Al–Cu–Mg composite
- (2008) A.H. Feng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Residual strains and microstructure development in single and sequential double sided friction stir welds in RQT-701 steel
- (2008) S.J. Barnes et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel
- (2008) T. Saeid et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Friction Stir Welding Parameters on Microstructures and Mechanical Properties of Brass Joints
- (2008) G. M. Xie et al. MATERIALS TRANSACTIONS
- Superplastic forming of friction stir welds in Titanium alloy 6Al-4V: preliminary results
- (2008) D.G. Sanders et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Artgleiche und artverschiedene reibrührgeschweißte Verbindungen aus AA2124+25 % SiC und AA2024
- (2008) U. Fuchs et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- The effect of weld parameters on friction stir welding of brass plates
- (2008) G. Çam et al. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK
- Recent advances in friction-stir welding – Process, weldment structure and properties
- (2008) R NANDAN et al. PROGRESS IN MATERIALS SCIENCE
- Cracking in dissimilar Mg alloy friction stir spot welds
- (2008) M. Yamamoto et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Development of grain structure in β-phase field during friction stir welding of Ti–6Al–4V alloy
- (2008) S. Mironov et al. SCRIPTA MATERIALIA
- Crystallography of transformed β microstructure in friction stir welded Ti–6Al–4V alloy
- (2008) S. Mironov et al. SCRIPTA MATERIALIA
- Thermoelasticity for the evaluation of fatigue behavior of 7005/Al2O3/10p metal matrix composite sheets joined by FSW
- (2007) P CAVALIERE et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructural characteristics and mechanical properties of Ti–6Al–4V friction stir welds
- (2007) Yu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and properties of friction stir butt-welded AE42 magnesium alloy
- (2007) R.P. Dobriyal et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy
- (2007) N. Afrin et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microstructural evolution on mechanical properties of friction stir welded ZK60 alloy
- (2007) G.M. Xie et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stir zone microstructure of commercial purity titanium friction stir welded using pcBN tool
- (2007) Yu Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Reliability study of friction stir welded copper canisters containing Sweden's nuclear waste
- (2007) Lars Cederqvist et al. RELIABILITY ENGINEERING & SYSTEM SAFETY
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started