Article
Nanoscience & Nanotechnology
I Burda, K. Zweiacker, A. Arabi-Hashemi, P. Barriobero-Vila, A. Stutz, R. Koller, H. Roelofs, L. Oberli, M. Lembke, C. Affolter, C. Leinenbach
Summary: Controlling the grain size of steels has a significant impact on their mechanical properties. This study successfully achieved microstructural refinement of a low-alloyed TRIP-assisted bainitic steel through a new industrial thermomechanical treatment. Fatigue tests showed the influence of this treatment on crack propagation behavior. Electron backscatter diffraction, vibrating sample magnetometry, and high-energy synchrotron X-ray diffraction were used to analyze the microstructure near the fatigue crack tip and assess the contribution of martensitic transformation to fracture toughness.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
(2022)
Article
Nanoscience & Nanotechnology
Sven E. Gustafson, Darren C. Pagan, Paul A. Shade, Michael D. Sangid
Summary: Elastic micromechanical fields of a nickel-based superalloy polycrystal are tracked using high energy X-ray diffraction microscopy (HEDM) to determine intragranular deformation metrics during cyclic high temperature loading. Results show that elevated temperatures lead to complex interactions among grains, with greater recovery observed at higher temperatures.
SCRIPTA MATERIALIA
(2021)
Article
Materials Science, Multidisciplinary
Tomoya Nagira, Daisuke Yamashita, Masayoshi Kamai, Huihong Liu, Yasuhiro Aoki, Kentaro Uesugi, Akihisa Takeuchi, Hidetoshi Fujii
Summary: The study found that solidification cracking propagated at a temperature lower than the solidus temperature due to segregation of low melting-point components. The relationship between the solidification cracking propagation velocity and the solid fraction and strain rate at the weld bead led to a periodic change in the solidification cracking velocity.
JOURNAL OF MATERIALS SCIENCE
(2021)
Article
Engineering, Mechanical
D. J. Shadle, M. P. Miller, K. E. Nygren
Summary: This study presents a framework for real-time monitoring of the evolution of a deforming polycrystal using principal component analysis (PCA) applied to X-ray diffraction image data. The researchers discovered correlations between PCA of the diffraction data and the physical processes in the polycrystal, which is significant for understanding fatigue failure processes.
INTERNATIONAL JOURNAL OF FATIGUE
(2022)
Article
Materials Science, Multidisciplinary
Ryan Schoell, Li Xi, Harvey West, Peter Hosemann, Jun-Sang Park, Peter Kenesei, Jonathan Almer, Zeev Shayer, Djamel Kaoumi
Summary: The effect of fatigue on the microstructure of three variations of 304 stainless steels was investigated using synchrotron x-ray tomography and diffraction. It was found that fatigue induced the formation of microvoids and cracks, and the chemical nature and shape of precipitates/inclusions played a role in microvoid formation.
MATERIALS CHARACTERIZATION
(2022)
Article
Materials Science, Multidisciplinary
Xueying L. Quinn, Rishi E. Kumar, Moses Kodur, Deniz N. Cakan, Zhonghou Cai, Tao Zhou, Martin V. Holt, David P. Fenning
Summary: Europium as a B-site additive in CsPbBr3 perovskite crystals reduces microstrain, improves photoluminescence yield, and enhances X-ray hardness. Despite variations in the degree of europium incorporation locally, the findings show promise for europium as an additive in perovskite optoelectronic devices.
ADVANCED OPTICAL MATERIALS
(2021)
Article
Chemistry, Physical
Yishan Bai, Shanglei Yang, Minqi Zhu, Cong Fan
Summary: Using synchrotron radiation X-ray imaging, this study examined the microstructure, tensile properties, and fatigue properties of FGH96 nickel-based superalloy. The alloy showed a dense structure without voids or defects, with high tensile strength and fatigue strength. Fatigue fractures exhibited characteristics of cleavage and ductile fractures, with crack propagation showing Z-shaped pattern under cyclic loading and tip passivation.
Article
Materials Science, Multidisciplinary
Yi Xiong, Phani S. Karamched, Chi-Toan Nguyen, David M. Collins, Nicolo Grilli, Christopher M. Magazzeni, Edmund Tarleton, Angus J. Wilkinson
Summary: In this study, the time dependent plastic behavior of commercially pure titanium samples with different oxygen content at various temperatures was characterized using synchrotron X-ray diffraction. It was found that 75 degrees C was the worst-case scenario in terms of plastic strain accumulation during relaxation cycles due to the high activity of both prism and basal slip systems. Oxygen was observed to have a stronger strengthening effect on prism slip compared to basal slip, especially in high oxygen content commercially pure Ti.
Article
Crystallography
Vinod Panchal, Laura Pampillo, Sergio Ferrari, Vitaliy Bilovol, Catalin Popescu, Daniel Errandonea
Summary: In this study, Co-doped SnO2 nanocrystals with a tetragonal rutile-type structure were subjected to high-pressure conditions up to 20.9 GPa. It was found that the Co-doped SnO2 undergoes a structural phase transition to an orthorhombic CaCl2-type phase at 14.2 GPa, with no phase coexistence. A discontinuous change in the unit-cell volume was observed during the phase transition, indicating a first-order type phase transition. Upon decompression, the transition was found to be reversible. The results were compared with previous studies on doped and un-doped SnO2, and the compressibility of different phases was discussed.
Article
Engineering, Mechanical
Manuel Carrera, Alejandro S. Cruces, Joseph F. Kelleher, Yee-Han Tai, John R. Yates, Philip J. Withers, Pablo Lopez-Crespo
Summary: This paper presents a new methodology for characterizing the plastic zone ahead of a fatigue crack, using experimental data and elastic strain maps to identify the size and shape of the plastic zone.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
(2022)
Article
Chemistry, Multidisciplinary
Dmitry V. Karpinsky, Maxim V. Silibin, Siarhei I. Latushka, Dmitry V. Zhaludkevich, Vadim V. Sikolenko, Hanan Al-Ghamdi, Aljawhara H. Almuqrin, M. I. Sayyed, Alexei A. Belik
Summary: The crystal structure and magnetic state of the (1 - x)BiFeO3-(x)BiMnO3 solid solution were analyzed. It was found that increasing the dopant concentration led to structural and magnetic transitions at room temperature, resulting in a two-phase structure. Irreversible temperature-driven structural transitions favored the stabilization of high-temperature structural phases.
Review
Metallurgy & Metallurgical Engineering
Youhong Peng, Kesong Miao, Wei Sun, Chenglu Liu, Hao Wu, Lin Geng, Guohua Fan
Summary: Characterizing the microstructure and deformation mechanism of metallic materials is crucial for understanding the microstructure-property relationship. Advanced synchrotron radiation facilities have enabled non-destructive visualization of full-field structural information in three dimensions, contributing to significant progress in recent decades. Future innovations in next-generation synchrotron radiation and emerging technologies hold great potential for further advancements in material characterization.
ACTA METALLURGICA SINICA-ENGLISH LETTERS
(2022)
Article
Engineering, Mechanical
Yujia Liu, Bo Xu, Sen Tang, Lang Li, Chao He, Chong Wang, Qingyuan Wang
Summary: This paper presents a thermodynamic characterization method for estimating the internal crack growth rate in very high cycle fatigue research. It discusses a theoretical approach for surface temperature considering crack size, initiation site, and time for thin sheet material. Infrared thermography is used to study the inner crack behavior and heat dissipation phenomenon on high-strength stainless steel under 20 kHz vibration loading. A numerical simulation reveals the temperature elevation on surfaces caused by heat generation at the crack tip and heat conduction. Ultimately, the internal crack growth rate and final fatigue failure prediction are obtained by combining the calculation of heat dissipation and the observed evolution of the surface temperature field.
INTERNATIONAL JOURNAL OF FATIGUE
(2023)
Article
Crystallography
Vinod Panchal, Catalin Popescu, Daniel Errandonea
Summary: The structural behavior of nanocrystalline alpha-CuMoO4 was studied using synchrotron X-ray powder diffraction up to 2 GPa at ambient temperature. It was found that the nanocrystalline alpha-CuMoO4 undergoes a structural phase transition to gamma-CuMoO4 at a pressure of 0.5 GPa. Both phases coexist until 1.2 GPa. The phase transition involves a change in copper coordination, with a 13% reduction in volume, indicating a first-order nature of the transition.
Article
Polymer Science
Nannan Zhu, Bolin Yang, Shengnan Li, Hailong Yang, Yueyue Miao, Yang Cong, Rui Zhang, Jun Fu
Summary: This study systematically investigates the contributions of hydrogen bonding, entanglements, crystallite crosslinking, and ion coordination to the dynamics of hydrogels. The results show that freeze-thawed polyvinyl alcohol (PVA) crystallites and ion coordination with alginate can enhance the strength and toughness of hydrogels. This study provides insights into the energy dissipation mechanisms of hydrogels through non-covalent interactions.
Article
Engineering, Mechanical
Yilun Xu, Daniel S. Balint, Christian Greiner, Daniele Dini
Summary: Discrete dislocation plasticity calculations are used to investigate the response of a single crystal under sliding loading conditions with a rigid sinusoidal asperity contact. The study identifies lattice rotations and stored energy as the key factors causing microstructure change in the dislocation structure. Maps of surface slip initiation and substrate permanent deformation obtained from the calculations suggest ways to optimize the interface and microstructural material properties for different frictional loads.
Review
Biophysics
Mohamed A. A. Abdelbar, James P. P. Ewen, Daniele Dini, Stefano Angioletti-Uberti
Summary: When polymer chains are densely grafted to solid surfaces, they form brushes that can alter surface properties and reduce friction in water-lubricated systems. Molecular simulations have been used to understand the mechanisms of friction reduction and improve the design of polymer brushes. This review focuses on the progress in molecular simulations of polymer brush friction, from simple models to more detailed ones that capture brush topology, chemistry, and electrostatic interactions. Matching experimental data and addressing remaining challenges are discussed to enhance the predictive capability of molecular simulations for optimizing brush structures and reducing friction.
Article
Engineering, Electrical & Electronic
Zilin Feng, Min Yu, Simos A. Evangelou, Imad M. Jaimoukha, Daniele Dini
Summary: This article presents a combined mu-synthesis PID control scheme, employing a frequency separation paradigm, for a recently proposed novel active suspension, the Parallel Active Link Suspension (PALS). The developed mu-synthesis control scheme is superior to the conventional H-infinity control, previously designed for the PALS, in terms of ride comfort and road holding (higher frequency dynamics), with important realistic uncertainties, such as in vehicle payload, taken into account. The developed PID control method is applied to guarantee good chassis attitude control capabilities and minimization of pitch and roll motions (low frequency dynamics).
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY
(2023)
Article
Biochemistry & Molecular Biology
Tian Yuan, Yi Yang, Wenbo Zhan, Daniele Dini
Summary: Magnetic nanoparticles (MNPs) can be used as a drug delivery system in brain diseases. However, achieving desired drug distribution patterns in the complex microstructure of brain tissues, particularly the white matter, is still unclear. In this study, a mathematical model was used to investigate the effects of key parameters on MNP diffusion in the brain white matter. The results show that a uniform distribution of MNPs can be achieved by adjusting particle size and magnetic field, and particle size plays a key role in determining MNPs' diffusion behaviors. Axon tortuosity may affect MNP transport, but this can be mitigated by applying an external magnetic field perpendicular to the local axon track.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
(2023)
Article
Nanoscience & Nanotechnology
Jiayu Xu, Yutian Ding, Yubi Gao, Bo Liu, Shengbing Xue, Yong Hu, Dong Zhang, Xu Song
Summary: The effects of hot isostatic pressing (HIP) on the defects, grain structure, and mechanical properties of Inconel 738 alloy were investigated. It was found that HIP treatment reduced defect densities, changed grain morphology, and improved high-temperature mechanical properties.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
(2023)
Article
Materials Science, Multidisciplinary
Zhiheng Hu, Shubo Gao, Junfei Tai, Shuo Qu, Junhao Ding, Xu Song, Zheng Fan
Summary: This study presents a quantitative method for adjusting the grain structure in laser powder bed fusion. Square-bottomed columnar grains (SCGs) with a certain width were developed based on distinguishable microstructural features between the melt-pool side and centreline. The controllable properties of SCGs were validated through ultrasonic attenuation measurements and microhardness tests.
MATERIALS RESEARCH LETTERS
(2023)
Article
Engineering, Manufacturing
Jin Fu, Junhao Ding, Lei Zhang, Shuo Qu, Xu Song, M. W. Fu
Summary: Additive manufacturing allows for the use of lattice structures in lightweight applications, particularly conformal lattice designs with freeform external geometry and internal lattice cores. However, the mechanical properties of conformal lattices are not well understood. This study used triply periodic minimal surface (TPMS) based conformal shell lattices fabricated by laser powder bed fusion (LPBF) to investigate the influence of design factors on mechanical properties. The results showed that factors such as shape transformation type, tilting angle of side walls, and cell orientation greatly influenced the deformation mechanism and mechanical properties of the shape-transformed structures. Additionally, the study found that the boundary between misaligned shape-transformed TPMS did not affect mechanical properties and energy absorption capability, and that conformal TPMS-filled monoclastic lattice exhibited better mechanical performance compared to uniformly in-filled counterparts. This work provides a quantitative correlation between design factors and mechanical properties of shape-transformed structures, highlighting the potential of TPMS-based conformal design in real-world lightweight applications.
ADDITIVE MANUFACTURING
(2023)
Article
Engineering, Manufacturing
Mian Qin, Shuo Qu, Junhao Ding, Xu Song, Shiming Gao, Charlie C. L. Wang, Wei- Hsin Liao
Summary: In this paper, a novel adaptive toolpath generation algorithm is proposed to reduce part distortion in laser powder bed fusion (LPBF) process. The algorithm minimizes thermal gradients and incorporates collision-free and smoothing constraints. Experimental results show that the proposed algorithm can reduce part distortion by 46% compared to zigzag patterns and 36% compared to chessboard-based patterns.
ADDITIVE MANUFACTURING
(2023)
Article
Engineering, Biomedical
Tian Yuan, Wenbo Zhan, Daniele Dini
Summary: This study reveals the impact of interactions between neurons and surrounding fluid on the macroscopic transport behavior of brain tissue, shedding light on unresolved issues related to brain functions and medical treatments. For the first time, a microstructure-informed permeability tensor was established to accurately model the transport properties of brain tissue. This study is important for improving the prediction accuracy of brain tissue transport properties and neural tissue engineering.
ACTA BIOMATERIALIA
(2023)
Article
Materials Science, Multidisciplinary
Fernando Patino-Ramirez, Catherine O'Sullivan, Daniele Dini
Summary: This paper proposes two algorithms to identify the network of percolating contacts that control the response of loaded granular media, and to decompose this network into the individual force chains. The results show that the contribution of force chains in the network is highly centralized, composed by a small set of strong and long-lived force chains, plus a large set of weak and short-lived force chains.
Article
Chemistry, Physical
Muhammad Rizwanur Rahman, Li Shen, James P. Ewen, Benjamin Collard, D. M. Heyes, Daniele Dini, E. R. Smith
Summary: Using non-equilibrium molecular dynamics simulations, we investigate the retraction of thin films and correct the Taylor-Culick (TC) theory for nanoscale films by deriving a new mathematical formulation for surface shape and considering locally varying surface tension.
JOURNAL OF CHEMICAL PHYSICS
(2023)
Article
Chemistry, Physical
D. M. Heyes, D. Dini, S. Pieprzyk, A. C. Branka
Summary: This work provides new theoretical tools and criteria to determine the extent of deviation from perfect isomorphicity for pair potentials using the Lennard-Jones system as a test case. A simple prediction method using the freezing line as a reference is shown to accurately predict isomorphs in the fluid range for the LJ system. The physical significance of correlations found previously in the literature can be evaluated using this method.
JOURNAL OF CHEMICAL PHYSICS
(2023)
Article
Mechanics
Navraj S. Lalli, Li Shen, Daniele Dini, Andrea Giusti
Summary: Previous studies have shown that a magnetic field can alter the drainage in soap films containing magnetic particles. However, it is still unclear whether a magnetic field can control the rate of drainage and film stability, as well as its effect on key drainage mechanisms. This experimental study investigates the behavior of soap films containing magnetite nanoparticles, revealing that a magnetic field can have a stabilizing or destabilizing effect on magnetic soap films depending on their composition.
Article
Chemistry, Analytical
Shuo Qu, Liqiang Wang, Junhao Ding, Jin Fu, Shiming Gao, Qingping Ma, Hui Liu, Mingwang Fu, Yang Lu, Xu Song
Summary: The study focuses on producing a robotic cannula tip with NiTi material, optimizing process parameters and testing samples to determine the optimal energy density for LPBF manufacturing of intricate NiTi components.
Article
Nanoscience & Nanotechnology
Guanze He, Hongbing Yu, Phani Karamched, Junliang Liu, Felix Hofmann
Summary: Elastic interactions play a crucial role in controlling irradiation damage evolution, yet experimental investigation on this topic is largely lacking. In this study, we used transmission electron microscopy and high-resolution on-axis transmission Kikuchi diffraction techniques to study the correlation between the evolution of irradiation-induced damage structures and the associated lattice strains in self-ion irradiated pure tungsten. The results revealed different dislocation loop structures depending on the sample thickness, indicating that free surfaces restrict the formation of extended defect structures observed in thicker samples. Strain analysis using high-resolution Kikuchi diffraction demonstrated the formation of crystallographically-oriented long-range strain fluctuations above 0.01 dpa and a decrease in total elastic energy above 0.1 dpa.
SCRIPTA MATERIALIA
(2023)
Article
Engineering, Mechanical
Miloslav Kepka, Miloslav Kepka Jr, Radovan Minich
Summary: This paper focuses on the fatigue life evaluation of the bodywork of a new articulated electric (battery) bus. The findings resulted in recommendations to improve the operational reliability of a particular vehicle and provided challenges for future research.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
T. Dusautoir, B. Berthel, S. Fouvry, P. Matzen, K-D. Meck
Summary: This study investigates the impact of post-processing treatments on the fatigue limit of additive manufactured Ti-6Al-4V under stress gradients, with a focus on surface integrity.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Zhuofan Xia, Di Wu, Xiaochen Zhang, Jianqiu Wang, En -Hou Han
Summary: The study reveals the surface-initiated rolling contact fatigue (RCF) failure mechanism under heavy load and initial high roughness surface. The results indicate that precursor of collapsed morphology and nanocrystalline layer are the main factors causing lower RCF life with high roughness compared to low roughness surfaces. The spalling failure initiating from low roughness surface under heavy load is strongly dependent on surface plastic deformation.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Daniel Gren, Knut Andreas Meyer
Summary: Rolling contact loading can cause plastic deformation and fatigue cracks. Current rail standards do not consider the effect of plasticity on mechanical behavior. This study proposes a new method for evaluating the fatigue life of deformed material and finds that superimposed compressive axial loads can increase fatigue life.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
R. Kumar, S. Sanyal, J. Bhagyaraj, E. Hari Krishna, S. Mukherjee, K. Prasad, S. Mandal
Summary: This study investigates the thermomechanical fatigue (TMF) behavior of Timetal 834 alloy under different loading conditions. The results show that the alloy exhibits different cyclic hardening and softening responses at different strain amplitudes. The strain amplitude and phase angle have significant effects on the TMF life.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Kai Donnerbauer, Tobias Bill, Peter Starke, Ruth Acosta, Bharath Yerrapa, Christian Boller, Klaus Heckmann, Frank Walther
Summary: Given the aging of nuclear power plants, it is important to develop methods for evaluating the integrity of components and structures in nuclear engineering. Suitable nondestructive testing methods can detect material degradation and determine its fatigue life. This study utilized various NDT parameters and scanning electron microscopic methods to explore the relationship between microstructure evolution and NDT data.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Liuyong He, Jiang Zheng, Tianjiao Li, Houkun Zhou, Lihong Xia, Bin Jiang
Summary: This study quantitatively analyzed the effects of precipitates on the deformation mode, cracking mode, and mechanical behavior of WE54 magnesium alloy during low-cycle fatigue. It was found that precipitates promoted the activation of dislocation slip and suppressed the activation of twinning, affecting the cracking mode and mechanical behavior.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Xiangkang Zeng, Conghui Zhang, Wenguang Zhu, Mingliang Zhu, Tongguang Zhai, Xiaomei He, Kangkai Song, Zhuohang Xie
Summary: The cyclic deformation behaviors and damage mechanisms of pure Zr were investigated. The cyclic stress response was mainly influenced by substructure evolutions. Prismatic < a > dislocation slip was identified as the dominant deformation mechanism. Fatigue damage was not only influenced by the initial texture, but also other factors.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Jingyu Yang, Bingbing Li, Yiming Zheng, Gang Chen, Xu Chen
Summary: Heat treatment is used to improve the low-cycle fatigue performance of additive manufactured 316LN stainless steel. The heat-treated material demonstrates initially cyclic hardening followed by softening behavior, and shows a stronger resistance to crack propagation compared to the as-built material, resulting in a longer fatigue life.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Lang Zou, Dongfang Zeng, Xiong Chen, Jun Li, Hai Zhao, Liantao Lu
Summary: This study investigates the competitive relationship between fretting fatigue and plain fatigue in press-fitted railway axles. By changing the depth of the stress relief groove, the plain fatigue limit and fretting fatigue strength were tested. Detailed information was gathered, and an evaluation methodology integrating finite element simulation and the Modified Wohler Curve Method was established. The study concludes that the optimal groove depth, which balances the anti-fatigue capabilities, depends on the number of test cycles.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Davide Leonetti, Koji Kinoshita, Yukina Takai, Alain Nussbaumer
Summary: This paper investigates the fatigue behavior of non-load-carrying transverse welded steel attachments, including fatigue crack monitoring and fracture surface analysis under constant and variable amplitude loading. A procedure is proposed to obtain a Markov transition matrix based on the measured strain signal and to randomly resample the stress history for variable amplitude fatigue tests.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Zhe Zhang, Bing Yang, Yuedong Wang, Shoune Xiao
Summary: This paper presents a method for designing fatigue life prediction models with small sample sizes by handling limited sample data. The method integrates the equivalent structural stress method with the maximum likelihood estimation method and adds reliability verification, resulting in enhanced goodness of fit, stability, and optimized sample quantity.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Cooper K. Hansen, Gary F. Whelan, Jacob D. Hochhalter
Summary: This paper presents a method to address the computational demand issue of computing FIPs using CPFEM by developing an interpretable machine learning model. Genetic programming is used to evolve interpretable expressions of FIPs from microstructure features, and these models can serve as efficient substitutes for CPFEM and be easily integrated into engineering workflows.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Luca Susmel
Summary: This paper discusses the problem of estimating notch fatigue limits using machine learning. The results show that machine learning is a promising approach for designing notched components against fatigue. The accuracy in estimating the fatigue limit can be increased by increasing the size and quality of the calibration dataset, as well as including additional input features.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
Article
Engineering, Mechanical
Kefeng Gao, Guoqi Tan, Yanyan Liu, Qiang Wang, Qian Tang, Xuegang Wang, Qiqiang Duan, Zengqian Liu, Zhe Yi, Zhefeng Zhang
Summary: Bioinspired architectures have significant effects on material enhancement. This study investigates the fatigue properties of bioinspired ceramic-polymer composites and natural nacre, revealing the close relationship between architectural types, orientations, fatigue performance, and damage mechanisms.
INTERNATIONAL JOURNAL OF FATIGUE
(2024)
