Sensitivity analysis in permeability estimation using logging and injection-falloff test data for an anthracite coalbed methane reservoir in Southeast Qinshui Basin, China

This paper presents a sensitivity analysis in permeability estimation by interpreting injection-falloff test and logging data for a producing coalbed methane field in Southeast Qinshui Basin. Injection-falloff test data are interpreted by an infinitely acting, constant compressibility and radial homogeneous model. Log interpretation is based on the Archie equation using data of shallow laterolog resistivity. The cementation factor of coal is calculated using laboratory measurements. Based on the interpreted cementation factors and the assumed fracture geometries, the sensitivity in permeability estimation using logging data is analyzed. Results show that the permeabilities are 0.041, 0.012 and 0.035 mD for coal seam #3 in wells #W-1, W-5 and W-6, respectively, from the interpretation of injection-falloff test data; the calculated coal cementation factors range widely from 0.9 to 1.8 with average of 1.3. In order to match the log interpretation results with those from injection-falloff tests, different fracture spacing is used in log interpretation for the three wells. The fracture spacing varies from 039 to 0.67 mm, and the average fracture aperture varies from 0229 to 0398 pm for the three wells. The cementation factor has the highest impact on estimation of permeability if the cementation factor, mud filtrate resistivity and fracture spacing are varied with 10% from the base case. Effect of fracture aperture's heterogeneity on permeability is depending on the standard deviation and average of fracture aperture. Effective permeability has a stronger relationship with geometric mean of face and butt cleats aperture than with total porosity for different face and butt spacing models. (C) 2014 Elsevier B.V. All rights reserved.