Induction of direct shoot organogenesis and in vitro flowering from shoot tip explants of cucumber (Cucumis sativus L. cv. 'Green long')

In vitro flowering is an alternative breeding tool for generating hybrid Cucumis spp. as it is able to overcome limitations caused by interspecific incompatibility. The present study describes an efficient method for induction of multiple shoots and in vitro flowering from shoot tip explants of cucumber (Cucumis sativus L.). Shoot tip explants were excised from 7-day-old seedlings and cultured on Murashige and Skoog (MS) medium fortified with different concentrations of 6-benzylaminopurine (BAP; 0.5-2.5 mg/L) alone or in combination with 0.5 mg/L kinetin (KIN). The highest frequency (93.1%) of multiple shoot formation with maximum number of shoots (15.2 shoots/explant) was achieved on MS medium supplemented with 1.0 mg/L BAP. For in vitro flowering, shoots were cultured on MS medium supplemented with 0.5 mg/L BAP and different concentrations of sucrose. Flowering occurred on about 95% of in vitro shoots cultured on MS medium fortified with 6% (w/v) sucrose and 0.5 mg/L BAP after 15 d. For rooting, shoots (> 2 cm) were cultured on MS medium augmented with various concentrations of indole-3-butyric acid (IBA; 0.5-2.5 mg/L) alone or in combination with 0.5 mg/L KIN. Among the combinations tested, supplementation with IBA (1.5 mg/L) and KIN (0.5 mg/L) induced maximum rooting rates (95.4%) with 7.8 roots/shoot. Rooted plantlets were successfully transferred into plastic cups containing a mixture of soil and sand (1:1), established in the greenhouse, and subsequently acclimatized in the field. The in vitro flowering reported in this study may facilitate rapid hybridization in Cucumis species and offers a model system for studying the physiological mechanisms involved in flowering.