标题
Roll-to-Roll Fabrication of Solution Processed Electronics
作者
关键词
-
出版物
ADVANCED ENGINEERING MATERIALS
Volume -, Issue -, Pages 1701190
出版商
Wiley
发表日期
2018-05-01
DOI
10.1002/adem.201701190
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- In-line, roll-to-roll morphology analysis of organic solar cell active layers
- (2017) Lea Hildebrandt Rossander et al. Energy & Environmental Science
- The rapid evolution of highly efficient perovskite solar cells
- (2017) Juan-Pablo Correa-Baena et al. Energy & Environmental Science
- Gravure printed PEDOT:PSS as anode for flexible ITO-free organic light emitting diodes
- (2017) M. Montanino et al. Express Polymer Letters
- Trailing edge formation during slot coating of rectangular patches
- (2017) D. Maza et al. Journal of Coatings Technology and Research
- Toward high volume solution based roll-to-roll processing of OLEDs
- (2017) Robert Abbel et al. JOURNAL OF MATERIALS RESEARCH
- Review Article: Tracing the recorded history of thin-film sputter deposition: From the 1800s to 2017
- (2017) J. E. Greene JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A
- Measurement of position accuracy of engraving in plate roller and its effect on register accuracy in roll-to-roll multi-layer printing
- (2017) Cheol Kim et al. MEASUREMENT SCIENCE and TECHNOLOGY
- Custom-Shaped Organic Photovoltaic Modules—Freedom of Design by Printing
- (2017) M. Välimäki et al. Nanoscale Research Letters
- Roll-to-roll manufacturing of disposable surface-enhanced Raman scattering (SERS) sensors on paper based substrates
- (2017) Jarkko J. Saarinen et al. NORDIC PULP & PAPER RESEARCH JOURNAL
- High-performance thin-film encapsulation for organic light-emitting diodes
- (2017) Peter van de Weijer et al. ORGANIC ELECTRONICS
- Fully solution-processed organic thin-film transistors by consecutive roll-to-roll gravure printing
- (2017) Jaemin Kim et al. ORGANIC ELECTRONICS
- Roll-to-roll preparation of silver-nanowire transparent electrode and its application to large-area organic light-emitting diodes
- (2017) Eun Jung et al. ORGANIC ELECTRONICS
- Large-Scale Roll-to-Roll Patterned Oxygen Indicators for Modified Atmosphere Packages
- (2017) Jarkko J. Saarinen et al. PACKAGING TECHNOLOGY AND SCIENCE
- Approach to optimizing printed conductive lines in high-resolution roll-to-roll gravure printing
- (2017) Ho Anh Duc Nguyen et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Facile fabrication of electrochemical ZnO nanowire glucose biosensor using roll to roll printing technique
- (2017) C.M. Fung et al. SENSORS AND ACTUATORS B-CHEMICAL
- Growth of thin barrier films on flexible polymer substrates by atomic layer deposition
- (2017) Karyn L. Jarvis et al. THIN SOLID FILMS
- Capturing the Sun: A Review of the Challenges and Perspectives of Perovskite Solar Cells
- (2017) Michiel L. Petrus et al. Advanced Energy Materials
- Roll-to-roll slot die production of 300 mm large area silver nanowire mesh films for flexible transparent electrodes
- (2017) Byung-Yong Wang et al. RSC Advances
- Origin of fullerene-induced vitrification of fullerene:donor polymer photovoltaic blends and its impact on solar cell performance
- (2017) Paul Westacott et al. Journal of Materials Chemistry A
- Updating the road map to metal-halide perovskites for photovoltaics
- (2017) Peter D. Matthews et al. Journal of Materials Chemistry A
- A water-based silver nanowire ink for large-scale flexible transparent conductive films and touch screens
- (2017) Shanyong Chen et al. Journal of Materials Chemistry C
- Custom-Shaped Organic Photovoltaic Modules—Freedom of Design by Printing
- (2017) M. Välimäki et al. Nanoscale Research Letters
- A Circuits and Systems Perspective of Organic/Printed Electronics: Review, Challenges, and Contemporary and Emerging Design Approaches
- (2017) Joseph S. Chang et al. IEEE Journal on Emerging and Selected Topics in Circuits and Systems
- Roll-to-Roll Fabrication of Flexible Orientated Graphene Transparent Electrodes by Shear Force and One-Step Reducing Post-Treatment
- (2017) Xiaotian Hu et al. Advanced Materials Technologies
- Low-Cost, Organic Light-Emitting Electrochemical Cells with Mass-Producible Nanoimprinted Substrates Made Using Roll-to-Roll Methods
- (2017) Kan Sato et al. Advanced Materials Technologies
- Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing
- (2016) Christa M. Homenick et al. ACS Applied Materials & Interfaces
- Roll-to-Roll Continuous Manufacturing Multifunctional Nanocomposites by Electric-Field-Assisted “Z” Direction Alignment of Graphite Flakes in Poly(dimethylsiloxane)
- (2016) Yuanhao Guo et al. ACS Applied Materials & Interfaces
- Roll to Roll Electric Field “Z” Alignment of Nanoparticles from Polymer Solutions for Manufacturing Multifunctional Capacitor Films
- (2016) Yuanhao Guo et al. ACS Applied Materials & Interfaces
- Continuous Patterning of Copper Nanowire-Based Transparent Conducting Electrodes for Use in Flexible Electronic Applications
- (2016) Zhaoyang Zhong et al. ACS Nano
- Shear-induced dry transfer of reduced graphene oxide thin film via roll-to-roll printing
- (2016) Hyun-woo Jang et al. APPLIED PHYSICS LETTERS
- Morphology changes upon scaling a high-efficiency, solution-processed solar cell
- (2016) Hyun Wook Ro et al. Energy & Environmental Science
- A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability
- (2016) Anish Priyadarshi et al. Energy & Environmental Science
- Combining Printing, Coating, and Vacuum Deposition on the Roll-to-Roll Scale: A Hybrid Organic Photovoltaics Fabrication
- (2016) Matthew J. Griffith et al. IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS
- Multi-response optimization of R2R gravure printing using orthogonal array and principal component analysis as a weighting factor
- (2016) Ho Anh Duc Nguyen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Roll-to-roll gravure printing of thick-film silver electrode micropatterns for flexible printed circuit board
- (2016) Kee-Hyun Shin et al. Journal of Coatings Technology and Research
- A robust position measurement system for precision alignment of roll-to-roll printing using alignment patterns and light quantity
- (2016) Minkyu Jung et al. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
- Large-area perovskite nanowire arrays fabricated by large-scale roll-to-roll micro-gravure printing and doctor blading
- (2016) Qiao Hu et al. Nanoscale
- Effects of the ink concentration on multi-layer gravure-printed PEDOT:PSS
- (2016) Giuliano Sico et al. ORGANIC ELECTRONICS
- Progress in emerging solution-processed thin film solar cells – Part I: Polymer solar cells
- (2016) Qin Wang et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Photovoltaic materials: Present efficiencies and future challenges
- (2016) A. Polman et al. SCIENCE
- Graphene as Transparent Electrodes: Fabrication and New Emerging Applications
- (2016) Yuanhong Xu et al. Small
- Morphological control and performance improvement of organic photovoltaic layer of roll-to-roll coated polymer solar cells
- (2016) Yu-Ching Huang et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Reverse gravure coating for roll-to-roll production of organic photovoltaics
- (2016) Doojin Vak et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Fully roll-to-roll prepared organic solar cells in normal geometry with a sputter-coated aluminium top-electrode
- (2016) Thomas R. Andersen et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Life Cycle Assessment (LCA) of perovskite PV cells projected from lab to fab
- (2016) Ilke Celik et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Fully gravure printed organic photovoltaic modules: A straightforward process with a high potential for large scale production
- (2016) Christos Kapnopoulos et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- A 250-mm-width, flexible, and continuous roll-to-roll slot-die coated carbon nanotube/silver nanowire film fabrication and a study on the effect of anti-reflective overcoat
- (2016) Keehyun Shin et al. THIN SOLID FILMS
- Polymer Thin Films and Surface Modification by Chemical Vapor Deposition: Recent Progress
- (2016) Nan Chen et al. Annual Review of Chemical and Biomolecular Engineering
- Roll-coating fabrication of flexible organic solar cells: comparison of fullerene and fullerene-free systems
- (2016) Kuan Liu et al. Journal of Materials Chemistry A
- Towards the scaling up of perovskite solar cells and modules
- (2016) Y. Galagan et al. Journal of Materials Chemistry A
- Luminescent Iridium Complexes Used in Light-Emitting Electrochemical Cells (LEECs)
- (2016) Adam F. Henwood et al. Topics in Current Chemistry
- Perovskite Solar Cells Shine in the “Valley of the Sun”
- (2016) Yuanyuan Zhou et al. ACS Energy Letters
- Printed multifunctional flexible device with an integrated motion sensor for health care monitoring
- (2016) Y. Yamamoto et al. Science Advances
- Self-Aligned Metal Electrodes in Fully Roll-to-Roll Processed Organic Transistors
- (2016) Marja Vilkman et al. Electronics
- Roll-to-roll slot-die coating of 400 mm wide, flexible, transparent Ag nanowire films for flexible touch screen panels
- (2016) Dong-Ju Kim et al. Scientific Reports
- Crystalline Nanojoining Silver Nanowire Percolated Networks on Flexible Substrate
- (2015) Qiong Nian et al. ACS Nano
- The Organic Power Transistor: Roll-to-Roll Manufacture, Thermal Behavior, and Power Handling When Driving Printed Electronics
- (2015) Francesco Pastorelli et al. ADVANCED ENGINEERING MATERIALS
- Light-Emitting Paper
- (2015) Amir Asadpoordarvish et al. ADVANCED FUNCTIONAL MATERIALS
- Square-Centimeter Solution-Processed Planar CH3NH3PbI3Perovskite Solar Cells with Efficiency Exceeding 15%
- (2015) Mengjin Yang et al. ADVANCED MATERIALS
- Toward Large Scale Roll-to-Roll Production of Fully Printed Perovskite Solar Cells
- (2015) Kyeongil Hwang et al. ADVANCED MATERIALS
- Roll-to-roll gravure printed silver patterns to guarantee printability and functionality for mass production
- (2015) Janghoon Park et al. CURRENT APPLIED PHYSICS
- Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers
- (2015) Yehao Deng et al. Energy & Environmental Science
- Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review
- (2015) Saleem Khan et al. IEEE SENSORS JOURNAL
- Roll-to-roll printed and assembled large area LED lighting element
- (2015) K. Keränen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Bending reliability of printed conductors deposited on plastic foil with various silver pastes
- (2015) Tuomas Happonen et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Development of hybrid process for double-side flexible printed circuit boards using roll-to-roll gravure printing, via-hole printing, and electroless plating
- (2015) Janghoon Park et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Diamond micro engraving of gravure roller mould for roll-to-roll printing of fine line electronics
- (2015) XinQuan Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Fast stabilization of web tension in drying process of roll-to-roll printing equipment for printed electronics
- (2015) Sung Woong Jeon et al. Journal of Mechanical Science and Technology
- Perovskite solar cells and large area modules (100 cm 2 ) based on an air flow-assisted PbI 2 blade coating deposition process
- (2015) Stefano Razza et al. JOURNAL OF POWER SOURCES
- Register control algorithm for high resolution multilayer printing in the roll-to-roll process
- (2015) Jongsu Lee et al. MECHANICAL SYSTEMS AND SIGNAL PROCESSING
- Roll-to-Roll Encapsulation of Metal Nanowires between Graphene and Plastic Substrate for High-Performance Flexible Transparent Electrodes
- (2015) Bing Deng et al. NANO LETTERS
- R2R-printed inverted OPV modules – towards arbitrary patterned designs
- (2015) M. Välimäki et al. Nanoscale
- Fully roll-to-roll processed organic top gate transistors using a printable etchant for bottom electrode patterning
- (2015) Marja Vilkman et al. ORGANIC ELECTRONICS
- Structuring of polymer solutions upon solvent evaporation
- (2015) C. Schaefer et al. PHYSICAL REVIEW E
- Graphene-based electrodes for flexible electronics
- (2015) Jea Woong Jo et al. POLYMER INTERNATIONAL
- Key Issues With Printed Flexible Thin Film Transistors and Their Application in Disposable RF Sensors
- (2015) Jinsoo Noh et al. PROCEEDINGS OF THE IEEE
- High-Speed Printing of Transistors: From Inks to Devices
- (2015) Vivek Subramanian et al. PROCEEDINGS OF THE IEEE
- Overlay accuracy on a flexible web with a roll printing process based on a roll-to-roll system
- (2015) Jaehyuk Chang et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Analysis of dynamic thermal characteristic of register of roll-to-roll multi-layer printing systems
- (2015) Jongsu Lee et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Highly stable flex sensors fabricated through mass production roll-to-roll micro-gravure printing system
- (2015) Memoon Sajid et al. SENSORS AND ACTUATORS A-PHYSICAL
- Solution-Processed Metal Oxides as Efficient Carrier Transport Layers for Organic Photovoltaics
- (2015) Wallace C. H. Choy et al. Small
- Roll and roll-to-roll process scaling through development of a compact flexo unit for printing of back electrodes
- (2015) Henrik F. Dam et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Study of perovskite solar cells synthesized under ambient conditions and of the performance of small cell modules
- (2015) Georgia Sfyri et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Solution and vapour deposited lead perovskite solar cells: Ecotoxicity from a life cycle assessment perspective
- (2015) Nieves Espinosa et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Digital fabrication of organic solar cells by Inkjet printing using non-halogenated solvents
- (2015) T.M. Eggenhuisen et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- High-Performance Fully Printable Perovskite Solar Cells via Blade-Coating Technique under the Ambient Condition
- (2015) Zhibin Yang et al. Advanced Energy Materials
- Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes
- (2015) Thomas M. Schmidt et al. Advanced Energy Materials
- An Investigation of the Ink-Transfer Mechanism During the Printing Phase of High-Resolution Roll-to-Roll Gravure Printing
- (2015) Ho Anh Duc Nguyen et al. IEEE Transactions on Components Packaging and Manufacturing Technology
- Large-scale R2R fabrication of piezoresistive films (Ni/PDMS) with enhanced through thickness electrical and thermal properties by applying a magnetic field
- (2015) Yuwei Chen et al. RSC Advances
- Scalability of carbon-nanotube-based thin film transistors for flexible electronic devices manufactured using an all roll-to-roll gravure printing system
- (2015) Hyunmo Koo et al. Scientific Reports
- Fully printed flexible and disposable wireless cyclic voltammetry tag
- (2015) Younsu Jung et al. Scientific Reports
- High efficiency, fully inkjet printed organic solar cells with freedom of design
- (2015) T. M. Eggenhuisen et al. Journal of Materials Chemistry A
- Roll-to-roll infrared (IR) drying and sintering of an inkjet-printed silver nanoparticle ink within 1 second
- (2015) Enrico Sowade et al. Journal of Materials Chemistry C
- A one-step roll-to-roll process of stable AgNW/PEDOT:PSS solution using imidazole as a mild base for highly conductive and transparent films: optimizations and mechanisms
- (2015) Seyul Kim et al. Journal of Materials Chemistry C
- Efficient screen printed perovskite solar cells based on mesoscopic TiO 2 /Al 2 O 3 /NiO/carbon architecture
- (2015) Kun Cao et al. Nano Energy
- High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing
- (2015) Sanjib Das et al. ACS Photonics
- Roll-to-Roll Production of Graphene Hybrid Electrodes for High-Efficiency, Flexible Organic Photoelectronics
- (2015) Xiaotian Hu et al. Advanced Materials Interfaces
- Laser Processing in the Manufacture of Dye-Sensitized and Perovskite Solar Cell Technologies
- (2015) Girolamo Mincuzzi et al. ChemElectroChem
- Towards High-Throughput Coating and Printing of Light-Emitting Electrochemical Cells: A Review and Cost Analysis of Current and Future Methods
- (2015) Andreas Sandström et al. Energy Technology
- Cover Picture: Roll-to-Roll Slot-Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors (Energy Technol. 8/2015)
- (2015) Yulia Galagan et al. Energy Technology
- Roll-to-Roll Slot-Die Coated Organic Photovoltaic (OPV) Modules with High Geometrical Fill Factors
- (2015) Yulia Galagan et al. Energy Technology
- Roll-to-Roll Sputter Coating of Aluminum Cathodes for Large-Scale Fabrication of Organic Photovoltaic Devices
- (2015) Matthew J. Griffith et al. Energy Technology
- Gravure-Printed ZnO in Fully Roll-to-Roll Printed Inverted Organic Solar Cells: Optimization of Adhesion and Performance
- (2015) Marja Vilkman et al. Energy Technology
- Fully Slot-Die-Coated All-Organic Solar Cells
- (2015) L. Mattias Andersson Energy Technology
- Spray Coating for Polymer Solar Cells: An Up-to-Date Overview
- (2015) Andrea Reale et al. Energy Technology
- Vividly colorful hybrid perovskite solar cells by doctor-blade coating with perovskite photonic nanostructures
- (2015) Yehao Deng et al. Materials Horizons
- A fully roll-to-roll gravure-printed carbon nanotube-based active matrix for multi-touch sensors
- (2015) Wookyu Lee et al. Scientific Reports
- Directed Electric FieldZ-Alignment Kinetics of Anisotropic Nanoparticles for Enhanced Ionic Conductivity
- (2014) Saurabh Batra et al. ADVANCED FUNCTIONAL MATERIALS
- Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells
- (2014) Zhanhua Wei et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Ultra-slim flexible glass for roll-to-roll electronic device fabrication
- (2014) Sean Garner et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Roll-to-roll production of spray coated N-doped carbon nanotube electrodes for supercapacitors
- (2014) Mehmet Karakaya et al. APPLIED PHYSICS LETTERS
- Large-Scale Flexible and Highly Conductive Carbon Transparent Electrodes via Roll-to-Roll Process and Its High Performance Lab-Scale Indium Tin Oxide-Free Polymer Solar Cells
- (2014) Xiaotian Hu et al. CHEMISTRY OF MATERIALS
- Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules
- (2014) Thomas R. Andersen et al. Energy & Environmental Science
- Benefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
- (2014) Jangwon Seo et al. Energy & Environmental Science
- Large scale deployment of polymer solar cells on land, on sea and in the air
- (2014) Nieves Espinosa et al. Energy & Environmental Science
- Recent Advances in Solid-State White Light-Emitting Electrochemical Cells
- (2014) Hai-Ching Su et al. ISRAEL JOURNAL OF CHEMISTRY
- A development and evaluation of micro-gravure coater for printed electronics
- (2014) Joong Kook Hwang et al. JAPANESE JOURNAL OF APPLIED PHYSICS
- Effect of process parameters on fidelity of printed line width in high resolution roll-to-roll gravure printing
- (2014) Ho Anh Duc Nguyen et al. JAPANESE JOURNAL OF APPLIED PHYSICS
- A review of non-contact micro- and nano-printing technologies
- (2014) Changhai Ru et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- Roll-to-Roll Gravure with Nanomaterials for Printing Smart Packaging
- (2014) Minhun Jung et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- A roll-to-roll welding process for planarized silver nanowire electrodes
- (2014) Seong Jun Lee et al. Nanoscale
- Silver nanoparticle piezoresistive sensors fabricated by roll-to-roll slot-die coating and laser direct writing
- (2014) Hyungman Lee et al. OPTICS EXPRESS
- All-solution-processed foldable transparent electrodes of Ag nanowire mesh and metal matrix films for flexible electronics
- (2014) Ross E. Triambulo et al. ORGANIC ELECTRONICS
- High precision processing of flexible P3HT/PCBM modules with geometric fill factor over 95%
- (2014) Peter Kubis et al. ORGANIC ELECTRONICS
- Solid-state solar modules based on mesoscopic organometal halide perovskite: a route towards the up-scaling process
- (2014) F. Matteocci et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Field assisted self-assembly for preferential through thickness (“z-direction”) alignment of particles and phases by electric, magnetic, and thermal fields using a novel roll-to-roll processing line
- (2014) Miko Cakmak et al. POLYMER ENGINEERING AND SCIENCE
- Roll-to-roll gravure printing of organic photovoltaic modules-insulation of processing defects by an interfacial layer
- (2014) Pälvi Apilo et al. PROGRESS IN PHOTOVOLTAICS
- High efficiency photovoltaic module based on mesoscopic organometal halide perovskite
- (2014) Fabio Matteocci et al. PROGRESS IN PHOTOVOLTAICS
- Optimized design for anti-reflection coating process in roll-to-roll slot-die coating system
- (2014) Janghoon Park et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Statistical analysis for the manufacturing of multi-strip patterns by roll-to-roll single slot-die systems
- (2014) Hyunkyoo Kang et al. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING
- Conductive Nanomaterials for Printed Electronics
- (2014) Alexander Kamyshny et al. Small
- Performance improvement of large-area roll-to-roll slot-die-coated inverted polymer solar cell by tailoring electron transport layer
- (2014) Hou-Chin Cha et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations
- (2014) Florian Machui et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- ITO-free organic solar cells with roll-to-roll coated organic functional layers from non-halogenated solvents
- (2014) Deepak Kaduwal et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Fully Roll-to-Roll Gravure Printable Wireless (13.56 MHz) Sensor-Signage Tags for Smart Packaging
- (2014) Hwiwon Kang et al. Scientific Reports
- 2D Characterization of OPV from Single and Tandem Cells to Fully Roll-to-Roll Processed Modules with and without Electrical Contact
- (2014) Frederik C. Krebs et al. Advanced Optical Materials
- Ultrasonic Spray Coating of 6.5% Efficient Diketopyrrolopyrrole-Based Organic Photovoltaics
- (2014) Jeffrey G. Tait et al. IEEE Journal of Photovoltaics
- Towards industrialization of polymer solar cells: material processing for upscaling
- (2014) Ignasi Burgués-Ceballos et al. Journal of Materials Chemistry A
- Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices
- (2014) Sebastian Wünscher et al. Journal of Materials Chemistry C
- All-Solution-Processed, Ambient Method for ITO-Free, Roll-Coated Tandem Polymer Solar Cells using Solution-Processed Metal Films
- (2014) Dechan Angmo et al. Energy Technology
- Comparison of UV-Curing, Hotmelt, and Pressure Sensitive Adhesive as Roll-to-Roll Encapsulation Methods for Polymer Solar Cells
- (2013) Markus Hösel et al. ADVANCED ENGINEERING MATERIALS
- 25th Anniversary Article: Rise to Power - OPV-Based Solar Parks
- (2013) Frederik C. Krebs et al. ADVANCED MATERIALS
- From lab to fab: how must the polymer solar cell materials design change? – an industrial perspective
- (2013) Riccardo Po et al. Energy & Environmental Science
- Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings
- (2013) Marcel Schmitt et al. Journal of Coatings Technology and Research
- Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications
- (2013) Jolke Perelaer et al. JOURNAL OF MATERIALS RESEARCH
- Scalability on Roll-to-Roll Gravure Printed Dielectric Layers for Printed Thin Film Transistors
- (2013) Minjin Yi et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- Flexible supercapacitor fabrication by room temperature rapid laser processing of roll-to-roll printed metal nanoparticle ink for wearable electronics application
- (2013) Junyeob Yeo et al. JOURNAL OF POWER SOURCES
- Simulation of Surface-Directed Phase Separation in a Solution-Processed Polymer/PCBM Blend
- (2013) Jasper J. Michels et al. MACROMOLECULES
- GRAPHENE-BASED TRANSPARENT CONDUCTIVE FILMS
- (2013) YOUNGBIN LEE et al. NANO
- Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices
- (2013) H J van de Wiel et al. NANOTECHNOLOGY
- Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules
- (2013) Dechan Angmo et al. ORGANIC ELECTRONICS
- White organic light-emitting diodes: Status and perspective
- (2013) Sebastian Reineke et al. REVIEWS OF MODERN PHYSICS
- Roll-to-Roll Cohesive, Coated, Flexible, High-Efficiency Polymer Light-Emitting Diodes Utilizing ITO-Free Polymer Anodes
- (2013) Seongbeom Shin et al. Small
- Interlaboratory outdoor stability studies of flexible roll-to-roll coated organic photovoltaic modules: Stability over 10,000h
- (2013) Suren A. Gevorgyan et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics
- (2013) C. Koidis et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Transparent conductive film by large area roll-to-roll processing
- (2013) Linda Y.L. Wu et al. THIN SOLID FILMS
- Thin-Film Growth and Patterning Techniques for Small Molecular Organic Compounds Used in Optoelectronic Device Applications
- (2013) Shaurjo Biswas et al. Annual Review of Chemical and Biomolecular Engineering
- Scaling Up ITO-Free Solar Cells
- (2013) Yulia Galagan et al. Advanced Energy Materials
- The case for organic photovoltaics
- (2013) Seth B. Darling et al. RSC Advances
- OPV for mobile applications: an evaluation of roll-to-roll processed indium and silver free polymer solar cells through analysis of life cycle, cost and layer quality using inline optical and functional inspection tools
- (2013) Nieves Espinosa et al. Journal of Materials Chemistry A
- Technology Advances in Flexible Displays and Substrates
- (2013) Janglin Chen et al. IEEE Access
- Charge Injection in Solution-Processed Organic Field-Effect Transistors: Physics, Models and Characterization Methods
- (2012) Dario Natali et al. ADVANCED MATERIALS
- Multivariable passive RFID vapor sensors: roll-to-roll fabrication on a flexible substrate
- (2012) Radislav A. Potyrailo et al. ANALYST
- Fatigue properties of atomic-layer-deposited alumina ultra-barriers and their implications for the reliability of flexible organic electronics
- (2012) E. K. Baumert et al. APPLIED PHYSICS LETTERS
- Printability of functional inks on multilayer curtain coated paper
- (2012) Roger Bollström et al. CHEMICAL ENGINEERING AND PROCESSING
- All printed transparent electrodes through an electrical switching mechanism: A convincing alternative to indium-tin-oxide, silver and vacuum
- (2012) Thue T. Larsen-Olsen et al. Energy & Environmental Science
- The relative importance of domain size, domain purity and domain interfaces to the performance of bulk-heterojunction organic photovoltaics
- (2012) Benjamin P. Lyons et al. Energy & Environmental Science
- Fabrication of conductive polymer coated elastomer contact structures using a reel-to-reel continuous fiber process
- (2012) Takahiro Yamashita et al. IEICE Electronics Express
- Flexible ITO-free polymer solar cells
- (2012) Dechan Angmo et al. JOURNAL OF APPLIED POLYMER SCIENCE
- A comparative study on dimensional stability of PET and BOPP substrates for fabrication of flexible electric/electronic devices through roll-to-roll printing
- (2012) Jang-Woo Lee et al. JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
- Degradation and stability of polymer-based solar cells
- (2012) Jea Uk Lee et al. JOURNAL OF MATERIALS CHEMISTRY
- Resistivity transition mechanism of silver salts in the next generation conductive ink for a roll-to-roll printed film with a silver network
- (2012) Dong-Youn Shin et al. JOURNAL OF MATERIALS CHEMISTRY
- Effects of direct solvent exposure on the nanoscale morphologies and electrical characteristics of PCBM-based transistors and photovoltaics
- (2012) Sooji Nam et al. JOURNAL OF MATERIALS CHEMISTRY
- Roll-to-Roll fabrication of large area functional organic materials
- (2012) Roar R. Søndergaard et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Fast printing of thin, large area, ITO free electrochromics on flexible barrier foil
- (2012) Roar R. Søndergaard et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Roll-to-roll fabrication of polymer solar cells
- (2012) Roar Søndergaard et al. Materials Today
- Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes
- (2012) Jong-Su Yu et al. Nanoscale
- Fully roll-to-roll gravure printed rectenna on plastic foils for wireless power transmission at 13.56 MHz
- (2012) Hyejin Park et al. NANOTECHNOLOGY
- The application of graphene as electrodes in electrical and optical devices
- (2012) Gunho Jo et al. NANOTECHNOLOGY
- Materials interface engineering for solution-processed photovoltaics
- (2012) Michael Graetzel et al. NATURE
- Past achievements and future challenges in the development of optically transparent electrodes
- (2012) Klaus Ellmer Nature Photonics
- Rapid flash annealing of thermally reactive copolymers in a roll-to-roll process for polymer solar cells
- (2012) Martin Helgesen et al. Polymer Chemistry
- Design of roll-to-roll printing equipment with multiple printing methods for multi-layer printing
- (2012) Chung Hwan Kim et al. REVIEW OF SCIENTIFIC INSTRUMENTS
- Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance
- (2012) Monika M. Voigt et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Random vs regularized OPV: Limits of performance gain of organic bulk heterojunction solar cells by morphology engineering
- (2012) Biswajit Ray et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating
- (2012) Andreas Sandström et al. Nature Communications
- New Low-Bandgap Materials with Good Stabilities and Efficiencies Comparable to P3HT in R2R-Coated Solar Cells
- (2012) Roar Søndergaard et al. Advanced Energy Materials
- Roll-to-Roll Inkjet Printing and Photonic Sintering of Electrodes for ITO Free Polymer Solar Cell Modules and Facile Product Integration
- (2012) Dechan Angmo et al. Advanced Energy Materials
- The OE-A OPV demonstrator anno domini 2011
- (2011) Frederik C. Krebs et al. Energy & Environmental Science
- Solar cells with one-day energy payback for the factories of the future
- (2011) Nieves Espinosa et al. Energy & Environmental Science
- Fully Gravure-Printed D Flip-Flop on Plastic Foils Using Single-Walled Carbon-Nanotube-Based TFTs
- (2011) J Noh et al. IEEE ELECTRON DEVICE LETTERS
- Back-Stepping Controller Based Web Tension Control for Roll-to-Roll Web Printed Electronics System
- (2011) Kyung-Hyun CHOI et al. Journal of Advanced Mechanical Design Systems and Manufacturing
- Optical design of organic light emitting diodes
- (2011) Z. B. Wang et al. JOURNAL OF APPLIED PHYSICS
- Roll-to-roll production of transparent conductive films using metallic grids
- (2011) Jasmin Woerle et al. MRS BULLETIN
- Integrable single walled carbon nanotube (SWNT) network based thin film transistors using roll-to-roll gravure and inkjet
- (2011) Jinsoo Noh et al. ORGANIC ELECTRONICS
- ITO-free flexible polymer solar cells: From small model devices to roll-to-roll processed large modules
- (2011) Matthieu Manceau et al. ORGANIC ELECTRONICS
- Gravure printed flexible organic photovoltaic modules
- (2011) Pälvi Kopola et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Simple roll coater with variable coating and temperature control for printed polymer solar cells
- (2011) Henrik F. Dam et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Environmental and economic assessment of ITO-free electrodes for organic solar cells
- (2011) Christopher J.M. Emmott et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Impact of metered ink volume on reel-to-reel flexographic printed conductive networks for enhanced thin film conductivity
- (2011) D. Deganello et al. THIN SOLID FILMS
- Current Collecting Grids for ITO-Free Solar Cells
- (2011) Yulia Galagan et al. Advanced Energy Materials
- Printed Paper Photovoltaic Cells
- (2011) Arved Hübler et al. Advanced Energy Materials
- Technology development for roll-to-roll production of organic photovoltaics
- (2010) Yulia Galagan et al. CHEMICAL ENGINEERING AND PROCESSING
- Small Molecule Solution-Processed Bulk Heterojunction Solar Cells†
- (2010) Bright Walker et al. CHEMISTRY OF MATERIALS
- Inkjet printing for flexible electronics: Materials, processes and equipments
- (2010) ZhouPing Yin et al. CHINESE SCIENCE BULLETIN
- All-Printed and Roll-to-Roll-Printable 13.56-MHz-Operated 1-bit RF Tag on Plastic Foils
- (2010) Minhun Jung et al. IEEE TRANSACTIONS ON ELECTRON DEVICES
- Scalability of Roll-to-Roll Gravure-Printed Electrodes on Plastic Foils
- (2010) Jinsoo Noh et al. IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING
- Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
- (2010) Frederik C. Krebs et al. JOURNAL OF MATERIALS CHEMISTRY
- A study on tension behavior considering thermal effects in roll-to-roll E-printing
- (2010) Changwoo Lee et al. Journal of Mechanical Science and Technology
- Quality control with matching technology in roll to roll printed electronics
- (2010) Changwoo Lee et al. Journal of Mechanical Science and Technology
- MEMS-Controlled Paper-Like Transmissive Flexible Display
- (2010) Cheng-Yao Lo et al. JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
- A Novel Method to Guarantee the Specified Thickness and Surface Roughness of the Roll-to-Roll Printed Patterns Using the Tension of a Moving Substrate
- (2010) Changwoo Lee et al. JOURNAL OF MICROELECTROMECHANICAL SYSTEMS
- Low Band Gap Polymers for Roll-to-Roll Coated Polymer Solar Cells
- (2010) Eva Bundgaard et al. MACROMOLECULES
- Uniformity of fully gravure printed organic field-effect transistors
- (2010) M. Hambsch et al. Materials Science and Engineering B-Advanced Functional Solid-State Materials
- Upscaling of polymer solar cell fabrication using full roll-to-roll processing
- (2010) Frederik C. Krebs et al. Nanoscale
- High efficient plastic solar cells fabricated with a high-throughput gravure printing method
- (2010) P. Kopola et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Gravure printing for three subsequent solar cell layers of inverted structures on flexible substrates
- (2010) Monika M. Voigt et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions
- (2010) Nieves Espinosa et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Patterning of micro-scale conductive networks using reel-to-reel flexographic printing
- (2010) D. Deganello et al. THIN SOLID FILMS
- Materials for Powder-Based AC-Electroluminescence
- (2010) Michael Bredol et al. Materials
- Flexible Polymer Photovoltaic Devices Prepared With Inverted Structures on Metal Foils
- (2009) Fang-Chung Chen et al. IEEE ELECTRON DEVICE LETTERS
- A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
- (2009) Frederik C. Krebs et al. JOURNAL OF MATERIALS CHEMISTRY
- Novel roll-to-roll lift-off patterned active-matrix display on flexible polymer substrate
- (2009) Cheng-Yao Lo et al. MICROELECTRONIC ENGINEERING
- All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps
- (2009) Frederik C. Krebs ORGANIC ELECTRONICS
- Roll-to-roll fabrication of monolithic large-area polymer solar cells free from indium-tin-oxide
- (2009) Frederik C. Krebs SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing
- (2009) Jau M. Ding et al. SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
- (2009) Frederik C. Krebs SOLAR ENERGY MATERIALS AND SOLAR CELLS
- Roll-to-Roll Printing of Silver Oxide Pastes and Low Temperature Conversion to Silver Patterns
- (2008) Sangki Chun et al. CHEMISTRY OF MATERIALS
- Fabrication and processing of polymer solar cells: A review of printing and coating techniques
- (2008) Frederik C. Krebs SOLAR ENERGY MATERIALS AND SOLAR CELLS
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search