标题
YUCOMAT 2016 to be held September 5–10 in Montenegro
作者
关键词
-
出版物
MRS BULLETIN
Volume 41, Issue 01, Pages 71
出版商
Cambridge University Press (CUP)
发表日期
2015-02-12
DOI
10.1557/mrs.2015.326
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Polycaprolactone-Coated 3D Printed Tricalcium Phosphate Scaffolds for Bone Tissue Engineering: In Vitro Alendronate Release Behavior and Local Delivery Effect on In Vivo Osteogenesis
- (2014) Solaiman Tarafder et al. ACS Applied Materials & Interfaces
- Control of in vivo mineral bone cement degradation
- (2014) Britta Kanter et al. Acta Biomaterialia
- Osseointegration of dental implants in 3D-printed synthetic onlay grafts customized according to bone metabolic activity in recipient site
- (2014) Faleh Tamimi et al. BIOMATERIALS
- 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration
- (2014) Jason A. Inzana et al. BIOMATERIALS
- Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects
- (2014) Miguel Castilho et al. Biofabrication
- SiO2 and ZnO dopants in three-dimensionally printed tricalcium phosphate bone tissue engineering scaffolds enhance osteogenesis and angiogenesis in vivo
- (2013) Gary Fielding et al. Acta Biomaterialia
- Bioceramics for drug delivery
- (2013) Daniel Arcos et al. ACTA MATERIALIA
- Lovastatin release from polycaprolactone coated β-tricalcium phosphate: Effects of pH, concentration and drug–polymer interactions
- (2013) Solaiman Tarafder et al. Materials Science & Engineering C-Materials for Biological Applications
- 3D printed tricalcium phosphate bone tissue engineering scaffolds: effect of SrO and MgO doping on in vivo osteogenesis in a rat distal femoral defect model
- (2013) Solaiman Tarafder et al. Biomaterials Science
- How smart do biomaterials need to be? A translational science and clinical point of view
- (2012) Boris Michael Holzapfel et al. ADVANCED DRUG DELIVERY REVIEWS
- Endocultivation: the influence of delayed vs. simultaneous application of BMP-2 onto individually formed hydroxyapatite matrices for heterotopic bone induction
- (2012) S.T. Becker et al. INTERNATIONAL JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
- Microwave-sintered 3D printed tricalcium phosphate scaffolds for bone tissue engineering
- (2012) Solaiman Tarafder et al. Journal of Tissue Engineering and Regenerative Medicine
- Recent advances in bone tissue engineering scaffolds
- (2012) Susmita Bose et al. TRENDS IN BIOTECHNOLOGY
- Printability of calcium phosphate powders for three-dimensional printing of tissue engineering scaffolds
- (2011) Andre Butscher et al. Acta Biomaterialia
- Hydraulic setting Mg3(PO4)2powders for 3D printing technology
- (2011) E Vorndran et al. Advances in Applied Ceramics
- Effects of silica and zinc oxide doping on mechanical and biological properties of 3D printed tricalcium phosphate tissue engineering scaffolds
- (2011) Gary A. Fielding et al. DENTAL MATERIALS
- Personalized implant for high tibial opening wedge: Combination of solid freeform fabrication with combustion synthesis process
- (2011) Fouad Zhim et al. JOURNAL OF BIOMATERIALS APPLICATIONS
- Vertical bone augmentation with 3D-synthetic monetite blocks in the rabbit calvaria
- (2011) Jesús Torres et al. JOURNAL OF CLINICAL PERIODONTOLOGY
- Inkjet printing of drug substances and use of porous substrates‐towards individualized dosing
- (2011) Niklas Sandler et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Evaluation of heat treatment regimes and their influences on the properties of powder-printed high-density polyethylene bone implant
- (2011) Jintamai Suwanprateeb et al. POLYMER INTERNATIONAL
- Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing
- (2010) A. Butscher et al. Acta Biomaterialia
- Simultaneous Immobilization of Bioactives During 3D Powder Printing of Bioceramic Drug-Release Matrices
- (2010) Elke Vorndran et al. ADVANCED FUNCTIONAL MATERIALS
- A review on stereolithography and its applications in biomedical engineering
- (2010) Ferry P.W. Melchels et al. BIOMATERIALS
- Polycaprolactone-based fused deposition modeled mesh for delivery of antibacterial agents to infected wounds
- (2010) Erin Yiling Teo et al. BIOMATERIALS
- 3D powder printed calcium phosphate implants for reconstruction of cranial and maxillofacial defects
- (2010) Uwe Klammert et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- Three-dimensional printing of flash-setting calcium aluminate cement
- (2010) Anne-Kathrin Maier et al. JOURNAL OF MATERIALS SCIENCE
- Low temperature fabrication of magnesium phosphate cement scaffolds by 3D powder printing
- (2010) Uwe Klammert et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- 3D printing of bone substitute implants using calcium phosphate and bioactive glasses
- (2010) Christian Bergmann et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Influence of raw powder preparation routes on properties of hydroxyapatite fabricated by 3D printing technique
- (2010) J. Suwanprateeb et al. Materials Science & Engineering C-Materials for Biological Applications
- Bioactive glass scaffolds for bone regeneration and their hierarchical characterisation
- (2010) J R Jones et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- Effect of silica gel on the cohesion, properties and biological performance of brushite cement
- (2009) Mohammad Hamdan Alkhraisat et al. Acta Biomaterialia
- 3D Powder Printing of β-Tricalcium Phosphate Ceramics Using Different Strategies
- (2009) E. Vorndran et al. ADVANCED ENGINEERING MATERIALS
- Different Calcium Phosphate Granules for 3-D Printing of Bone Tissue Engineering Scaffolds
- (2009) Hermann Seitz et al. ADVANCED ENGINEERING MATERIALS
- Craniofacial vertical bone augmentation: A comparison between 3D printed monolithic monetite blocks and autologous onlay grafts in the rabbit
- (2009) Faleh Tamimi et al. BIOMATERIALS
- Multi-directional Le Fort III midfacial distraction using an individual prefabricated device
- (2009) Uwe Klammert et al. JOURNAL OF CRANIO-MAXILLOFACIAL SURGERY
- Low temperature preparation of calcium phosphate structure via phosphorization of 3D-printed calcium sulfate hemihydrate based material
- (2009) J. Suwanprateeb et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- The controlled-releasing drug implant based on the three dimensional printing technology: Fabrication and properties of drug releasing in vivo
- (2009) Weigang Wu et al. JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION
- Cytocompatibility of brushite and monetite cell culture scaffolds made by three-dimensional powder printing
- (2008) U. Klammert et al. Acta Biomaterialia
- Novel drug delivery devices for providing linear release profiles fabricated by 3DP
- (2008) Deng-Guang Yu et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabrication of bioactive hydroxyapatite/bis-GMA based composite via three dimensional printing
- (2008) J. Suwanprateeb et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Preparation of tricalcium phosphate/calcium pyrophosphate structures via rapid prototyping
- (2008) Uwe Gbureck et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Porous ceramic bone scaffolds for vascularized bone tissue regeneration
- (2008) Julia Will et al. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE
- Three-Dimensional Printing in Pharmaceutics: Promises and Problems
- (2008) Deng Guang Yu et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Modeling microstructure development and release kinetics in controlled drug release coatings**The mention of commercial products, their source, or their use in connection with the material reported herein is not to be construed as either an actual or implied endorsement by either the US Food and Drug Administration or the National Institute of Standards and Technology.
- (2008) David M. Saylor et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- 3DP process for fine mesh structure printing
- (2008) Kathy Lu et al. POWDER TECHNOLOGY
- Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants
- (2007) P HABIBOVIC et al. BIOMATERIALS
- Treatment of Infected Hip Arthroplasty With Antibiotic-Impregnated Calcium Hydroxyapatite
- (2007) Akihiro Sudo et al. JOURNAL OF ARTHROPLASTY
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started