标题
Analysing fracture properties of bio-inspired 3D printed suture structures
作者
关键词
-
出版物
THIN-WALLED STRUCTURES
Volume 176, Issue -, Pages 109317
出版商
Elsevier BV
发表日期
2022-05-10
DOI
10.1016/j.tws.2022.109317
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- 3D printed tubular lattice metamaterials for mechanically robust stents
- (2022) Huan Jiang et al. COMPOSITES PART B-ENGINEERING
- Learning from nature: Bio-Inspiration for damage-tolerant high-performance fibre-reinforced composites
- (2021) János Plocher et al. COMPOSITES SCIENCE AND TECHNOLOGY
- 3D printed sandwich beams with bioinspired cores: Mechanical performance and modelling
- (2021) Chenxi Peng et al. THIN-WALLED STRUCTURES
- Hierarchical toughening: A step toward matching the complexity of biological materials
- (2021) Daniel R. King et al. Chem
- Dynamic mechanical behaviour of suture interfaces as inspiration for architectured hierarchical interlocking composites
- (2021) B. Alheit et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Research on the material flow and joining performance of two-strokes flattening clinched joint
- (2021) Hao Peng et al. THIN-WALLED STRUCTURES
- From nature to additive manufacturing: Biomimicry of porcupine quill
- (2021) Yun Lu Tee et al. MATERIALS & DESIGN
- Experimental Tests, FEM Constitutive Modeling and Validation of PLGA Bioresorbable Polymer for Stent Applications
- (2020) Jakub Bukala et al. Materials
- Investigation of a renovating process for failure clinched joint to join thin-walled structures
- (2020) Chao Chen et al. THIN-WALLED STRUCTURES
- FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
- (2020) Sachini Wickramasinghe et al. Polymers
- Toughening mechanisms of the elytra of the diabolical ironclad beetle
- (2020) Jesus Rivera et al. NATURE
- Investigation of the flat-clinching process for joining three-layer sheets on thin-walled structures
- (2020) Chao Chen et al. THIN-WALLED STRUCTURES
- In-plane compression of 3D-printed self-similar hierarchical honeycombs – Static and dynamic analysis
- (2020) Shiqiang Li et al. THIN-WALLED STRUCTURES
- Low-velocity impact response of tube-reinforced honeycomb sandwich structure
- (2020) Yunwei Zhang et al. THIN-WALLED STRUCTURES
- On the Strain Rate Sensitivity of Fused Filament Fabrication (FFF) Processed PLA, ABS, PETG, PA6, and PP Thermoplastic Polymers
- (2020) Nectarios Vidakis et al. Polymers
- BVS stent optimisation based on a parametric model with a multistage validation process
- (2020) Łukasz A. Mazurkiewicz et al. MATERIALS & DESIGN
- Learning from nature: Use material architecture to break the performance tradeoffs
- (2019) Zian Jia et al. MATERIALS & DESIGN
- Fracture modes and hybrid toughening mechanisms in oscillated/twisted plywood structure
- (2019) Zhaoqiang Song et al. Acta Biomaterialia
- 3D printing of biomimetic composites with improved fracture toughness
- (2019) Zian Jia et al. ACTA MATERIALIA
- Interfacial toughening effect of suture structures
- (2019) Zengqian Liu et al. Acta Biomaterialia
- Strength and toughness trade-off optimization of nacre-like ceramic composites
- (2019) Kaoutar Radi et al. COMPOSITES PART B-ENGINEERING
- Strength and toughness enhancement in 3d printing via bioinspired tool path
- (2019) Yuxuan Sun et al. MATERIALS & DESIGN
- Crack twisting and toughening strategies in Bouligand architectures
- (2018) Nobphadon Suksangpanya et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- In-plane and out-of-plane bending responses of aluminum mortise-tenon joints in lightweight electric vehicle inspired by timber structures
- (2018) Qiang Liu et al. THIN-WALLED STRUCTURES
- The Influence of Manufacturing Parameters on the Mechanical Behaviour of PLA and ABS Pieces Manufactured by FDM: A Comparative Analysis
- (2018) Adrián Rodríguez-Panes et al. Materials
- 3D printed meta-sandwich structures: Failure mechanism, energy absorption and multi-hit capability
- (2018) H. Yazdani Sarvestani et al. MATERIALS & DESIGN
- Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer
- (2018) Shilpesh R. Rajpurohit et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of process parameters on tensile strength of FDM printed PLA part
- (2018) Shilpesh R. Rajpurohit et al. RAPID PROTOTYPING JOURNAL
- Improving the fracture toughness of 3D printed thermoplastic polymers by fused deposition modeling
- (2017) Julien Gardan et al. INTERNATIONAL JOURNAL OF FRACTURE
- The mechanics of tessellations – bioinspired strategies for fracture resistance
- (2016) Peter Fratzl et al. CHEMICAL SOCIETY REVIEWS
- Toughening of thin ceramic plates using bioinspired surface patterns
- (2016) Idris A. Malik et al. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES
- Structure and mechanics of interfaces in biological materials
- (2016) Francois Barthelat et al. Nature Reviews Materials
- Leatherback sea turtle shell: A tough and flexible biological design
- (2015) Irene H. Chen et al. Acta Biomaterialia
- Structural Design Elements in Biological Materials: Application to Bioinspiration
- (2015) Steven E. Naleway et al. ADVANCED MATERIALS
- Ncorr: Open-Source 2D Digital Image Correlation Matlab Software
- (2015) J. Blaber et al. EXPERIMENTAL MECHANICS
- The impact of process parameters on mechanical properties of parts fabricated in PLA with an open-source 3-D printer
- (2015) Antonio Lanzotti et al. RAPID PROTOTYPING JOURNAL
- Bio-inspired impact-resistant composites
- (2014) L.K. Grunenfelder et al. Acta Biomaterialia
- Designing nacre-like materials for simultaneous stiffness, strength and toughness: Optimum materials, composition, microstructure and size
- (2014) Francois Barthelat JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- 3D printed, bio-inspired prototypes and analytical models for structured suture interfaces with geometrically-tuned deformation and failure behavior
- (2014) Erica Lin et al. JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS
- Hierarchical multiscale structure-property relationships of the red-bellied woodpecker (Melanerpes carolinus) beak
- (2014) N. Lee et al. Journal of the Royal Society Interface
- Mechanical properties of components fabricated with open-source 3-D printers under realistic environmental conditions
- (2014) B.M. Tymrak et al. MATERIALS & DESIGN
- Strong, tough and stiff bioinspired ceramics from brittle constituents
- (2014) Florian Bouville et al. NATURE MATERIALS
- Bioinspired structural materials
- (2014) Ulrike G. K. Wegst et al. NATURE MATERIALS
- Overcoming the brittleness of glass through bio-inspiration and micro-architecture
- (2014) M. Mirkhalaf et al. Nature Communications
- Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing
- (2013) Leon S. Dimas et al. ADVANCED FUNCTIONAL MATERIALS
- Centric diatom algae of the Selenga River and its delta branches
- (2012) S. I. Genkal et al. Inland Water Biology
- The conflicts between strength and toughness
- (2011) Robert O. Ritchie NATURE MATERIALS
- Timing of Ectocranial Suture Activity in Pan troglodytes as Related to Cranial Volume and Dental Eruption
- (2010) James Cray et al. Anatomical Record-Advances in Integrative Anatomy and Evolutionary Biology
- On the mechanical properties of hierarchically structured biological materials
- (2010) Sabine Bechtle et al. BIOMATERIALS
- On the Fracture Toughness of Advanced Materials
- (2009) Maximilien E. Launey et al. ADVANCED MATERIALS
- Tough, Bio-Inspired Hybrid Materials
- (2008) E. Munch et al. SCIENCE
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started