标题
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
作者
关键词
-
出版物
ADVANCED MATERIALS
Volume -, Issue -, Pages 2108855
出版商
Wiley
发表日期
2022-03-05
DOI
10.1002/adma.202108855
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Biomimetic and Biologically Compliant Soft Architectures via 3D and 4D Assembly Methods: A Perspective
- (2022) Jay M. Taylor et al. ADVANCED MATERIALS
- Direct coherent multi-ink printing of fabric supercapacitors
- (2021) Jingxin Zhao et al. Science Advances
- Magnetic properties of bulk nanocrystalline cobalt ferrite obtained by high-pressure field assisted sintering
- (2021) Angelica Baldini et al. JOURNAL OF PHYSICS D-APPLIED PHYSICS
- Direct ink writing of metal parts with curing by UV light irradiation
- (2021) Haojie Wang et al. Materials Today Communications
- Three-dimensional Printing of Complex Graphite Structures
- (2021) Seyed Mohammad Sajadi et al. CARBON
- Direct Ink Writing of Hierarchical Porous Ultra‐high Temperature Ceramics (ZrB 2 )
- (2021) M.L. Sesso et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- 3D Printable Conducting and Biocompatible PEDOT‐ graft ‐PLA Copolymers by Direct Ink Writing
- (2021) Antonio Dominguez‐Alfaro et al. MACROMOLECULAR RAPID COMMUNICATIONS
- Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review
- (2021) Zhenzhong Hou et al. Frontiers in Materials
- 3D printing of reduced graphene oxide aerogels for energy storage devices: A paradigm from materials and technologies to applications
- (2021) Binbin Guo et al. Energy Storage Materials
- Direct writing of customized structural-color graphics with colloidal photonic inks
- (2021) Jong Bin Kim et al. Science Advances
- 4D Printing of High-Performance Thermal-Responsive Liquid Metal Elastomers Driven by Embedded Microliquid Chambers
- (2020) Lu-yu Zhou et al. ACS Applied Materials & Interfaces
- Fabrication of Si 2 N 2 O Ceramic Foam by Combination of Direct Ink Writing and Biological Foaming Techniques
- (2020) Haize Jin et al. ADVANCED ENGINEERING MATERIALS
- 3D‐Printed Structure Boosts the Kinetics and Intrinsic Capacitance of Pseudocapacitive Graphene Aerogels
- (2020) Bin Yao et al. ADVANCED MATERIALS
- Modification of pore‐wall in direct ink writing wollastonite scaffolds favorable for tuning biodegradation and mechanical stability and enhancing osteogenic capability
- (2020) Xiurong Ke et al. FASEB JOURNAL
- Boron nitride‐reinforced polysilazane‐derived ceramic composites via direct‐ink writing
- (2020) James W. Kemp et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Tunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose
- (2020) Pramod Dorishetty et al. ACS Sustainable Chemistry & Engineering
- Direct-Write Printing Copper–Nickel (Cu/Ni) Alloy with Controlled Composition from a Single Electrolyte Using Co-Electrodeposition
- (2020) Chao Wang et al. ACS Applied Materials & Interfaces
- Strong Macroscale Supercrystalline Structures by 3D Printing Combined with Self‐Assembly of Ceramic Functionalized Nanoparticles
- (2020) Berta Domènech et al. ADVANCED ENGINEERING MATERIALS
- 4D Printing of Hydrogels: A Review
- (2020) Mathilde Champeau et al. ADVANCED FUNCTIONAL MATERIALS
- Direct Ink Writing Glass: A Preliminary Step for Optical Application
- (2020) Bo Nan et al. Materials
- Formulation of Sugar/Hydrogel Inks for Rapid Thermal Response 4D Architectures with Sugar-derived Macropores
- (2020) Hyojin Ko et al. Scientific Reports
- Additive manufacturing of short fiber reinforced thermoset composites with unprecedented mechanical performance
- (2020) Nashat Nawafleh et al. Additive Manufacturing
- Complex SiOC ceramics from 2D structures by 3D printing and origami
- (2020) Kai Huang et al. Additive Manufacturing
- Reactive 3D Printing of Shape-Programmable Liquid Crystal Elastomer Actuators
- (2020) Morgan Barnes et al. ACS Applied Materials & Interfaces
- Direct ink writing of surface-modified flax elastomer composites
- (2020) Yizhou Jiang et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing of Portland cement pastes with additions of kaolin, superplastificant and calcium carbonate
- (2020) Luis A. Vergara et al. CONSTRUCTION AND BUILDING MATERIALS
- 3D printing of multi-scalable structures via high penetration near-infrared photopolymerization
- (2020) Junzhe Zhu et al. Nature Communications
- Direct Ink Writing Technology (3D Printing) of Graphene-Based Ceramic Nanocomposites: A Review
- (2020) Nestor Washington Solís Pinargote et al. Nanomaterials
- Direct Ink Writing Based 4D Printing of Materials and Their Applications
- (2020) Xue Wan et al. Advanced Science
- Liquid Metal Direct Write and 3D Printing: A Review
- (2020) Taylor V. Neumann et al. Advanced Materials Technologies
- Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes
- (2020) Marc Pozo et al. ADVANCED FUNCTIONAL MATERIALS
- Direct Ink Writing of Polymer Composite Electrolytes with Enhanced Thermal Conductivities
- (2020) Meng Cheng et al. ADVANCED FUNCTIONAL MATERIALS
- Feasibility study of hydrocolloid incorporated 3D printed pork as dysphagia food
- (2020) Arianna Dick et al. FOOD HYDROCOLLOIDS
- Additive manufacturing of silica aerogels
- (2020) Shanyu Zhao et al. NATURE
- 3D-printed multifunctional materials enabled by artificial-intelligence-assisted fabrication technologies
- (2020) Zhijie Zhu et al. Nature Reviews Materials
- Three-dimensional printing of functionally graded liquid crystal elastomer
- (2020) Zijun Wang et al. Science Advances
- 3D printed self-supporting elastomeric structures for multifunctional microfluidics
- (2020) Ruitao Su et al. Science Advances
- 3D ink-extrusion printing and sintering of Ti, Ti-TiB and Ti-TiC microlattices
- (2020) Binna Song et al. Additive Manufacturing
- Photopolymerization of Macroscale Black 3D Objects Using Near-Infrared Photochemistry
- (2020) Xiucheng Zou et al. ACS Applied Materials & Interfaces
- 3D Printing of Dual-Physical Cross-linking Hydrogel with Ultrahigh Strength and Toughness
- (2020) Pan Jiang et al. CHEMISTRY OF MATERIALS
- Extraction of material properties through multi-fidelity deep learning from molecular dynamics simulation
- (2020) Mahmudul Islam et al. COMPUTATIONAL MATERIALS SCIENCE
- SnO2-Ag composites with high thermal cycling stability created by Ag infiltration of 3D ink-extruded SnO2 microlattices
- (2020) Pengyu Chen et al. Applied Materials Today
- Mechanics of nozzle clogging during direct ink writing of fiber-reinforced composites
- (2020) Brendan P. Croom et al. Additive Manufacturing
- 3D-printed tungsten sheet-gyroids via reduction and sintering of extruded WO3-nanopowder inks
- (2020) Christoph Kenel et al. Additive Manufacturing
- 3D food printing of as the new way of preparing food: A review
- (2020) Sylvester Mantihal et al. International Journal of Gastronomy and Food Science
- Additive manufacturing of advanced ceramic materials
- (2020) Y. Lakhdar et al. PROGRESS IN MATERIALS SCIENCE
- 3D ink-extrusion additive manufacturing of CoCrFeNi high-entropy alloy micro-lattices
- (2019) Christoph Kenel et al. Nature Communications
- Mechanical Properties of Printed Epoxy-Carbon Fiber Composites
- (2019) H. A. Pierson et al. EXPERIMENTAL MECHANICS
- A Versatile Approach for Direct Patterning of Liquid Metal Using Magnetic Field
- (2019) Biao Ma et al. ADVANCED FUNCTIONAL MATERIALS
- 3D Printing of Multifunctional Hydrogels
- (2019) Zhe Chen et al. ADVANCED FUNCTIONAL MATERIALS
- Direct Ink Writing of Cement Structures Modified with Nanoscale Additive
- (2019) Seyed Mohammad Sajadi et al. ADVANCED ENGINEERING MATERIALS
- Direct Ink Writing of High Performance Architectured Polyimides with Low Dimensional Shrinkage
- (2019) Yuxiong Guo et al. ADVANCED ENGINEERING MATERIALS
- Dual-Gel 4D Printing of Bioinspired Tubes
- (2019) Jiayu Liu et al. ACS Applied Materials & Interfaces
- Multi-Material Direct Ink Writing (DIW) for Complex 3D Metallic Structures with Removable Supports
- (2019) Chao Xu et al. ACS Applied Materials & Interfaces
- Direct Wiring of Eutectic Gallium-Indium to a Metal Electrode for Soft Sensor Systems
- (2019) Suin Kim et al. ACS Applied Materials & Interfaces
- Omnidirectional Printing of Soft Elastomer for Liquid-State Stretchable Electronics
- (2019) Jiachen Wang et al. ACS Applied Materials & Interfaces
- Long Liquid Crystal Elastomer Fibers with Large Reversible Actuation Strains for Smart Textiles and Artificial Muscles
- (2019) Devin J. Roach et al. ACS Applied Materials & Interfaces
- 3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam
- (2019) Qiyi Chen et al. ADVANCED FUNCTIONAL MATERIALS
- Three-Dimensional, High-Resolution Printing of Carbon Nanotube/Liquid Metal Composites with Mechanical and Electrical Reinforcement
- (2019) Young-Geun Park et al. NANO LETTERS
- Microstructure and mechanical property of Cf/SiC core/shell composite fabricated by direct ink writing
- (2019) Yuanlin Xia et al. SCRIPTA MATERIALIA
- 3D printing of hybrid MoS2-graphene aerogels as highly porous electrode materials for sodium ion battery anodes
- (2019) Emery Brown et al. MATERIALS & DESIGN
- Active Mixing of Disparate Inks for Multimaterial 3D Printing
- (2019) Jason M. Ortega et al. Advanced Materials Technologies
- Direct 3D Printing of Hybrid Nanofiber-Based Nanocomposites for Highly Conductive and Shape Memory Applications
- (2019) Hongqiu Wei et al. ACS Applied Materials & Interfaces
- Electrowetting Assisted Selective Printing of Liquid Metal
- (2019) Alexander M. Watson et al. ADVANCED ENGINEERING MATERIALS
- A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders
- (2019) Tamar Rosental et al. ADVANCED ENGINEERING MATERIALS
- 3D Printing of Freestanding MXene Architectures for Current‐Collector‐Free Supercapacitors
- (2019) Wenji Yang et al. ADVANCED MATERIALS
- Micro/Nanoscale 3D Assembly by Rolling, Folding, Curving, and Buckling Approaches
- (2019) Xu Cheng et al. ADVANCED MATERIALS
- 3D Printing of Salt as a Template for Magnesium with Structured Porosity
- (2019) Nicole Kleger et al. ADVANCED MATERIALS
- Novel strategy for toughening robocast bioceramic scaffolds using polymeric cores
- (2019) Claudia Paredes et al. CERAMICS INTERNATIONAL
- 3D printing of shape memory poly(d ,l -lactide-co -trimethylene carbonate) by direct ink writing for shape-changing structures
- (2019) Xue Wan et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Additive manufacturing of composites made of epoxy resin with magnetite particles fabricated with the direct ink writing technique
- (2019) Jose J Restrepo et al. JOURNAL OF COMPOSITE MATERIALS
- In Operando Monitoring of Dynamic Recovery in 3D-Printed Thermoset Nanocomposites by XPCS
- (2019) Kyle J. Johnson et al. LANGMUIR
- Additive-free MXene inks and direct printing of micro-supercapacitors
- (2019) Chuanfang Zhang et al. Nature Communications
- Versatile N‐Doped MXene Ink for Printed Electrochemical Energy Storage Application
- (2019) Lianghao Yu et al. Advanced Energy Materials
- High-resolution, reconfigurable printing of liquid metals with three-dimensional structures
- (2019) Young-Geun Park et al. Science Advances
- 3D food printing: a categorised review of inks and their development
- (2019) Siew Li Voon et al. Virtual and Physical Prototyping
- Periodic buckling of soft 3D printed bioinspired tubes
- (2019) Jiayu Liu et al. Extreme Mechanics Letters
- The Rise of MXenes
- (2019) Yury Gogotsi et al. ACS Nano
- Digital Printing of Solid State Lithium Ion Batteries
- (2019) L. Jay Deiner et al. ADVANCED ENGINEERING MATERIALS
- Architected Polymer Foams via Direct Bubble Writing
- (2019) Claas Willem Visser et al. ADVANCED MATERIALS
- Highly Stretchable Photonic Crystal Hydrogels for Sensitive Mechanochromic Sensor and Direct Ink Writing
- (2019) Jiayao Chen et al. CHEMISTRY OF MATERIALS
- Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
- (2019) Mark A. Skylar-Scott et al. Science Advances
- Direct ink writing of three dimensional Ti2AlC porous structures
- (2019) Hamada Elsayed et al. Additive Manufacturing
- 4D Printing of a Liquid Crystal Elastomer with a Controllable Orientation Gradient
- (2019) Chun Zhang et al. ACS Applied Materials & Interfaces
- Direct-Ink-Write 3D Printing of Hydrogels into Biomimetic Soft Robots
- (2019) Yin Cheng et al. ACS Nano
- Extrusion-based additive manufacturing of yttria-partially-stabilized zirconia ceramics
- (2019) Tianyu Yu et al. CERAMICS INTERNATIONAL
- Stiff reconfigurable polygons for smart connecters and deployable structures
- (2019) Zeang Zhao et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Direct ink writing of porous titanium (Ti6Al4V) lattice structures
- (2019) Hamada Elsayed et al. Materials Science & Engineering C-Materials for Biological Applications
- Voxelated soft matter via multimaterial multinozzle 3D printing
- (2019) Mark A. Skylar-Scott et al. NATURE
- Chocolate-based Ink Three-dimensional Printing (Ci3DP)
- (2019) Rahul Karyappa et al. Scientific Reports
- Additively manufacturing high-performance bismaleimide architectures with ultraviolet-assisted direct ink writing
- (2019) Tao Wu et al. MATERIALS & DESIGN
- 3D Printing of Additive-Free 2D Ti3C2Tx (MXene) Ink for Fabrication of Micro-Supercapacitors with Ultra-High Energy Densities
- (2019) Jafar Orangi et al. ACS Nano
- High thermal conductive epoxy based composites fabricated by multi-material direct ink writing
- (2019) Junchao Liu et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Extrusion-based 3D printing of food pastes: Correlating rheological properties with printing behaviour
- (2019) Sicong Zhu et al. Innovative Food Science & Emerging Technologies
- A composite neural network that learns from multi-fidelity data: Application to function approximation and inverse PDE problems
- (2019) Xuhui Meng et al. JOURNAL OF COMPUTATIONAL PHYSICS
- Direct ink writing core-shell Wollastonite@Diopside scaffolds with tailorable shell micropores favorable for optimizing physicochemical and biodegradation properties
- (2019) Jianhua Shen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Three-dimensional hierarchical nanoporous copper via direct ink writing and dealloying
- (2019) Shahryar Mooraj et al. SCRIPTA MATERIALIA
- Additive Manufacturing of Catalytically Active Living Materials
- (2018) Abhijit Saha et al. ACS Applied Materials & Interfaces
- 3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing
- (2018) Xiao Kuang et al. ACS Applied Materials & Interfaces
- Generalized 3D Printing of Graphene-Based Mixed-Dimensional Hybrid Aerogels
- (2018) Xingwei Tang et al. ACS Nano
- Patterned Liquid Metal Contacts for Printed Carbon Nanotube Transistors
- (2018) Joseph B. Andrews et al. ACS Nano
- Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
- (2018) Michael K. Hausmann et al. ACS Nano
- Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W-Cu Composites
- (2018) Micha Calvo et al. ADVANCED ENGINEERING MATERIALS
- Mechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing
- (2018) Qiyi Chen et al. ADVANCED FUNCTIONAL MATERIALS
- 3D-Printed Biomimetic Scaffold Simulating Microfibril Muscle Structure
- (2018) WonJin Kim et al. ADVANCED FUNCTIONAL MATERIALS
- Towards Sub-Microscale Liquid Metal Patterns: Cascade Phase Change Mediated Pick-n-Place Transfer of Liquid Metals Printed and Stretched over a Flexible Substrate
- (2018) Doyoon Kim et al. ADVANCED FUNCTIONAL MATERIALS
- Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
- (2018) Yanqiu Jiang et al. ADVANCED FUNCTIONAL MATERIALS
- 3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients
- (2018) Dimitri Kokkinis et al. ADVANCED MATERIALS
- Extrusion-Based 3D Printing of Hierarchically Porous Advanced Battery Electrodes
- (2018) Steven D. Lacey et al. ADVANCED MATERIALS
- Architected Lattices with High Stiffness and Toughness via Multicore-Shell 3D Printing
- (2018) Jochen Mueller et al. ADVANCED MATERIALS
- 3D Printing of Customized Li-Ion Batteries with Thick Electrodes
- (2018) Teng-Sing Wei et al. ADVANCED MATERIALS
- 3D Printing of Liquid Crystal Elastomeric Actuators with Spatially Programed Nematic Order
- (2018) Arda Kotikian et al. ADVANCED MATERIALS
- 3D Printed Functional and Biological Materials on Moving Freeform Surfaces
- (2018) Zhijie Zhu et al. ADVANCED MATERIALS
- Soft Robotics
- (2018) George M. Whitesides ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Fresh and hardened properties of 3D printable cementitious materials for building and construction
- (2018) Suvash Chandra Paul et al. Archives of Civil and Mechanical Engineering
- High-strength epoxy nanocomposites for 3D printing
- (2018) Nadim S. Hmeidat et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effect of Different Gums on Features of 3D Printed Object Based on Vitamin-D Enriched Orange Concentrate
- (2018) Roknul S. M. Azam et al. Food Biophysics
- Effect of gums on the rheological, microstructural and extrusion printing characteristics of mashed potatoes
- (2018) Zhenbin Liu et al. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
- Impact of rheological properties of mashed potatoes on 3D printing
- (2018) Zhenbin Liu et al. JOURNAL OF FOOD ENGINEERING
- Investigation on fish surimi gel as promising food material for 3D printing
- (2018) Lin Wang et al. JOURNAL OF FOOD ENGINEERING
- Direct ink writing of highly bioactive glasses
- (2018) Amy Nommeots-Nomm et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Investigation on lemon juice gel as food material for 3D printing and optimization of printing parameters
- (2018) Fanli Yang et al. LWT-FOOD SCIENCE AND TECHNOLOGY
- Three-dimensional printing of shape memory hydrogels with internal structure for drug delivery
- (2018) Yongzhou Wang et al. Materials Science & Engineering C-Materials for Biological Applications
- Rotational 3D printing of damage-tolerant composites with programmable mechanics
- (2018) Jordan R. Raney et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing
- (2018) Kaijuan Chen et al. Soft Matter
- 3D printing of robotic soft actuators with programmable bioinspired architectures
- (2018) Manuel Schaffner et al. Nature Communications
- 3D Printing Quasi-Solid-State Asymmetric Micro-Supercapacitors with Ultrahigh Areal Energy Density
- (2018) Kai Shen et al. Advanced Energy Materials
- Optimization and Characterization of Preceramic Inks for Direct Ink Writing of Ceramic Matrix Composite Structures
- (2018) Giorgia Franchin et al. Materials
- 4D Printing of Robust Hydrogels Consisted of Agarose Nanofibers and Polyacrylamide
- (2018) Jinhua Guo et al. ACS Macro Letters
- Direct Ink Write 3D Printed Cellulose Nanofiber Aerogel Structures with Highly Deformable, Shape Recoverable, and Functionalizable Properties
- (2018) Vincent C. F. Li et al. ACS Sustainable Chemistry & Engineering
- 3D printing of high performance cyanate ester thermoset polymers
- (2018) Swetha Chandrasekaran et al. Journal of Materials Chemistry A
- Three-dimensional ultraflexible triboelectric nanogenerator made by 3D printing
- (2018) Baodong Chen et al. Nano Energy
- Direct Writing and Repairable Paper Flexible Electronics Using Nickel-Liquid Metal Ink
- (2018) Hao Chang et al. Advanced Materials Interfaces
- 3D printing of soft robotic systems
- (2018) T. J. Wallin et al. Nature Reviews Materials
- Rheological Modification of Liquid Metal for Additive Manufacturing of Stretchable Electronics
- (2018) Uranbileg Daalkhaijav et al. Advanced Materials Technologies
- 3D Printed Optical Quality Silica and Silica-Titania Glasses from Sol-Gel Feedstocks
- (2018) Joel F. Destino et al. Advanced Materials Technologies
- 3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy
- (2018) Hongshi Ma et al. Acta Biomaterialia
- A Single Integrated 3D-Printing Process Customizes Elastic and Sustainable Triboelectric Nanogenerators for Wearable Electronics
- (2018) Shuo Chen et al. ADVANCED FUNCTIONAL MATERIALS
- 3D Printed Stem-Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds
- (2018) Daeha Joung et al. ADVANCED FUNCTIONAL MATERIALS
- Additive Manufacturing and Performance of Architectured Cement-Based Materials
- (2018) Mohamadreza Moini et al. ADVANCED MATERIALS
- Elevated-Temperature 3D Printing of Hybrid Solid-State Electrolyte for Li-Ion Batteries
- (2018) Meng Cheng et al. ADVANCED MATERIALS
- Form and functional repair of long bone using 3D-printed bioactive scaffolds
- (2018) Nick Tovar et al. Journal of Tissue Engineering and Regenerative Medicine
- Rapid energy-efficient manufacturing of polymers and composites via frontal polymerization
- (2018) Ian D. Robertson et al. NATURE
- Printing ferromagnetic domains for untethered fast-transforming soft materials
- (2018) Yoonho Kim et al. NATURE
- Environment-friendly and reusable ink for 3D printing of metallic structures
- (2018) Chao Xu et al. MATERIALS & DESIGN
- Origami and 4D printing of elastomer-derived ceramic structures
- (2018) Guo Liu et al. Science Advances
- Toward digitally controlled catalyst architectures: Hierarchical nanoporous gold via 3D printing
- (2018) Cheng Zhu et al. Science Advances
- Fabricating 3D Structures by Combining 2D Printing and Relaxation of Strain
- (2018) Brian J. Cafferty et al. Advanced Materials Technologies
- Ultraviolet-Assisted Direct Ink Write to Additively Manufacture All-Aromatic Polyimides
- (2018) Daniel A. Rau et al. ACS Applied Materials & Interfaces
- Highly Porous Sr/Mg-Doped Hardystonite Bioceramics from Preceramic Polymers and Reactive Fillers: Direct Foaming and Direct Ink Writing
- (2018) Hamada Elsayed et al. ADVANCED ENGINEERING MATERIALS
- Full 3D Printing of Stretchable Piezoresistive Sensor with Hierarchical Porosity and Multimodulus Architecture
- (2018) Ziya Wang et al. ADVANCED FUNCTIONAL MATERIALS
- Molecularly-Engineered, 4D-Printed Liquid Crystal Elastomer Actuators
- (2018) Mohand O. Saed et al. ADVANCED FUNCTIONAL MATERIALS
- Textural modification of 3D printed dark chocolate by varying internal infill structure
- (2018) Sylvester Mantihal et al. FOOD RESEARCH INTERNATIONAL
- 3D printing of ceramics: A review
- (2018) Zhangwei Chen et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Self Assembly-Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy-Amine Thermosets
- (2018) Kylie B. Manning et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Novel ink for ambient condition printing of liquid crystal elastomers for 4D printing
- (2018) Devin J Roach et al. Smart Materials and Structures
- 3D-Printed Hydrogel Composites for Predictive Temporal (4D) Cellular Organizations and Patterned Biogenic Mineralization
- (2018) Joselle M. McCracken et al. Advanced Healthcare Materials
- Bidirectional and Stretchable Piezoresistive Sensors Enabled by Multimaterial 3D Printing of Carbon Nanotube/Thermoplastic Polyurethane Nanocomposites
- (2018) Josef Christ et al. Polymers
- Four Degrees-of-Freedom Direct Writing of Liquid Metal Patterns on Uneven Surfaces
- (2018) Young Yoon et al. Advanced Materials Technologies
- A biocompatible thermoset polymer binder for Direct Ink Writing of porous titanium scaffolds for bone tissue engineering
- (2018) Yunhui Chen et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of hydrocolloid addition on dimensional stability in post-processing of 3D printable cookie dough
- (2018) Hyun Woo Kim et al. LWT-FOOD SCIENCE AND TECHNOLOGY
- Current advances and future perspectives of 3D printing natural-derived biopolymers
- (2018) Jun Liu et al. CARBOHYDRATE POLYMERS
- Electrical and Mechanical Properties of 3D-Printed Graphene-Reinforced Epoxy
- (2017) Brett G. Compton et al. JOM
- Custom Repair of Mandibular Bone Defects with 3D Printed Bioceramic Scaffolds
- (2017) H. Shao et al. JOURNAL OF DENTAL RESEARCH
- Direct ink writing of ceramic matrix composite structures
- (2017) Giorgia Franchin et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Direct ink writing of wollastonite-diopside glass-ceramic scaffolds from a silicone resin and engineered fillers
- (2017) Hamada Elsayed et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Anisotropic mechanical performance of 3D printed fiber reinforced sustainable construction material
- (2017) Biranchi Panda et al. MATERIALS LETTERS
- Strengthening and Stiffening Graphene Oxide Fiber with Trivalent Metal Ion Binders
- (2017) Wonsik Eom et al. PARTICLE & PARTICLE SYSTEMS CHARACTERIZATION
- Architected cellular ceramics with tailored stiffness via direct foam writing
- (2017) Joseph T. Muth et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Acoustic control of microstructures during direct ink writing of two-phase materials
- (2017) Leanne Friedrich et al. SENSORS AND ACTUATORS A-PHYSICAL
- 3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers
- (2017) Chao Yuan et al. Soft Matter
- 3D printing: Printing precision and application in food sector
- (2017) Zhenbin Liu et al. TRENDS IN FOOD SCIENCE & TECHNOLOGY
- Hydraulic hydrogel actuators and robots optically and sonically camouflaged in water
- (2017) Hyunwoo Yuk et al. Nature Communications
- 3D Printable Ceramic-Polymer Electrolytes for Flexible High-Performance Li-Ion Batteries with Enhanced Thermal Stability
- (2017) Aaron J. Blake et al. Advanced Energy Materials
- Environmentally Friendly Engineering and Three-Dimensional Printing of TiO2 Hierarchical Mesoporous Cellular Architectures
- (2017) Maria A. Torres Arango et al. ACS Sustainable Chemistry & Engineering
- Solvent-cast based metal 3D printing and secondary metallic infiltration
- (2017) Chao Xu et al. Journal of Materials Chemistry C
- A multifunctional skin-like sensor based on a 3D printed thermo-responsive hydrogel
- (2017) Zhouyue Lei et al. Materials Horizons
- Wiring up Liquid Metal: Stable and Robust Electrical Contacts Enabled by Printable Graphene Inks
- (2017) Ethan B. Secor et al. Advanced Electronic Materials
- A review of 4D printing
- (2017) Farhang Momeni et al. MATERIALS & DESIGN
- Flexible mechanical metamaterials
- (2017) Katia Bertoldi et al. Nature Reviews Materials
- Sequential self-folding of polymer sheets
- (2017) Ying Liu et al. Science Advances
- 3D printing of bacteria into functional complex materials
- (2017) Manuel Schaffner et al. Science Advances
- Additive Manufacturing of Cellulosic Materials with Robust Mechanics and Antimicrobial Functionality
- (2017) Sebastian W. Pattinson et al. Advanced Materials Technologies
- 3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties
- (2017) James P. Lewicki et al. Scientific Reports
- Direct Ink Write (DIW) 3D Printed Cellulose Nanocrystal Aerogel Structures
- (2017) Vincent Chi-Fung Li et al. Scientific Reports
- Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
- (2017) Amin M’Barki et al. Scientific Reports
- 3D Printed Silicones with Shape Memory
- (2017) Amanda S. Wu et al. Scientific Reports
- 3D Printing Bioinspired Ceramic Composites
- (2017) Ezra Feilden et al. Scientific Reports
- Laser-Direct Writing of Silver Metal Electrodes on Transparent Flexible Substrates with High-Bonding Strength
- (2016) Weiping Zhou et al. ACS Applied Materials & Interfaces
- Direct-Write Fabrication of 4D Active Shape-Changing Structures Based on a Shape Memory Polymer and Its Nanocomposite
- (2016) Hongqiu Wei et al. ACS Applied Materials & Interfaces
- Rapid Continuous Multimaterial Extrusion Bioprinting
- (2016) Wanjun Liu et al. ADVANCED MATERIALS
- High-Operating-Temperature Direct Ink Writing of Mesoscale Eutectic Architectures
- (2016) J. William Boley et al. ADVANCED MATERIALS
- A Generalizable Strategy for the 3D Bioprinting of Hydrogels from Nonviscous Photo-crosslinkable Inks
- (2016) Liliang Ouyang et al. ADVANCED MATERIALS
- 3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
- (2016) Clara Minas et al. ADVANCED MATERIALS
- Progress in 3D Printing of Carbon Materials for Energy-Related Applications
- (2016) Kun Fu et al. ADVANCED MATERIALS
- Ultraflexible In-Plane Micro-Supercapacitors by Direct Printing of Solution-Processable Electrochemically Exfoliated Graphene
- (2016) Zhaoyang Liu et al. ADVANCED MATERIALS
- Synthesis and biomedical applications of aerogels: Possibilities and challenges
- (2016) Hajar Maleki et al. ADVANCES IN COLLOID AND INTERFACE SCIENCE
- Current advances and future perspectives in extrusion-based bioprinting
- (2016) Ibrahim T. Ozbolat et al. BIOMATERIALS
- The temperature-dependent fracture models for fiber-reinforced ceramic matrix composites
- (2016) Yong Deng et al. COMPOSITE STRUCTURES
- Robocasting of silicon nitride with controllable shape and architecture for biomedical applications
- (2016) Santuan Zhao et al. International Journal of Applied Ceramic Technology
- Additive Manufacturing of Dense Ceramic Parts via Direct Ink Writing of Aqueous Alumina Suspensions
- (2016) Lisa Rueschhoff et al. International Journal of Applied Ceramic Technology
- In situ observation of mechanical damage within a SiC-SiC ceramic matrix composite
- (2016) L. Saucedo-Mora et al. JOURNAL OF NUCLEAR MATERIALS
- Additive Manufacturing of SiCN Ceramic Matrix for SiC Fiber Composites by Flash Pyrolysis of Nanoscale Polymer Films
- (2016) Setareh Azarnoush et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds
- (2016) Andrea Zocca et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Additive manufacturing of boron carbide via continuous filament direct ink writing of aqueous ceramic suspensions
- (2016) William J. Costakis et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Direct Ink Writing of micrometric SiOC ceramic structures using a preceramic polymer
- (2016) Giovanni Pierin et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Robocasting of structural ceramic parts with hydrogel inks
- (2016) Ezra Feilden et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Mechanical properties and shape memory effect of 3D-printed PLA-based porous scaffolds
- (2016) F.S. Senatov et al. Journal of the Mechanical Behavior of Biomedical Materials
- Supercapacitors Based on Three-Dimensional Hierarchical Graphene Aerogels with Periodic Macropores
- (2016) Cheng Zhu et al. NANO LETTERS
- An integrated design and fabrication strategy for entirely soft, autonomous robots
- (2016) Michael Wehner et al. NATURE
- A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
- (2016) Hyun-Wook Kang et al. NATURE BIOTECHNOLOGY
- Biomimetic 4D printing
- (2016) A. Sydney Gladman et al. NATURE MATERIALS
- Advanced structural ceramics in aerospace propulsion
- (2016) Nitin P. Padture NATURE MATERIALS
- Laser-assisted direct ink writing of planar and 3D metal architectures
- (2016) Mark A. Skylar-Scott et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Three-dimensional bioprinting of thick vascularized tissues
- (2016) David B. Kolesky et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Three dimensional printed macroporous polylactic acid/hydroxyapatite composite scaffolds for promoting bone formation in a critical-size rat calvarial defect model
- (2016) Haifeng Zhang et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- 3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
- (2016) Liliang Ouyang et al. ACS Biomaterials-Science & Engineering
- 3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
- (2016) Thomas J. Hinton et al. ACS Biomaterials-Science & Engineering
- 3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
- (2016) Liliang Ouyang et al. ACS Biomaterials Science & Engineering
- 3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding
- (2016) Thomas J. Hinton et al. ACS Biomaterials Science & Engineering
- Freeze-Printing of Liquid Metal Alloys for Manufacturing of 3D, Conductive, and Flexible Networks
- (2016) Abhishek Gannarapu et al. Advanced Materials Technologies
- Multifunctional 3D printing of heterogeneous hydrogel structures
- (2016) Ali Nadernezhad et al. Scientific Reports
- 3D Bioprinting of Cellulose Structures from an Ionic Liquid
- (2016) Kajsa Markstedt et al. 3D Printing and Additive Manufacturing
- Three-Dimensional Printing of High-Content Graphene Scaffolds for Electronic and Biomedical Applications
- (2015) Adam E. Jakus et al. ACS Nano
- Metallic Architectures from 3D-Printed Powder-Based Liquid Inks
- (2015) Adam E. Jakus et al. ADVANCED FUNCTIONAL MATERIALS
- Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
- (2015) Anders Clausen et al. ADVANCED MATERIALS
- Direct 3D Printing of Shear-Thinning Hydrogels into Self-Healing Hydrogels
- (2015) Christopher B. Highley et al. ADVANCED MATERIALS
- Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
- (2015) James O. Hardin et al. ADVANCED MATERIALS
- 3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures
- (2015) Sungmin Hong et al. ADVANCED MATERIALS
- Biomimetic 3D tissue printing for soft tissue regeneration
- (2015) Falguni Pati et al. BIOMATERIALS
- Porous alumina ceramic scaffolds with biomimetic macro/micro-porous structure using three-dimensional (3-D) ceramic/camphene-based extrusion
- (2015) Young-Wook Moon et al. CERAMICS INTERNATIONAL
- Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
- (2015) Giovanni Postiglione et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Three-dimensional printed PCL-hydroxyapatite scaffolds filled with CNTs for bone cell growth stimulation
- (2015) Elsa M. Gonçalves et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- 4D Printing with Mechanically Robust, Thermally Actuating Hydrogels
- (2015) Shannon E. Bakarich et al. MACROMOLECULAR RAPID COMMUNICATIONS
- Direct write printing of three-dimensional ZrO2 biological scaffolds
- (2015) Ya-yun Li et al. MATERIALS & DESIGN
- First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials
- (2015) Tadashi Fujieda et al. MATERIALS LETTERS
- 3D printing of a multifunctional nanocomposite helical liquid sensor
- (2015) Shuang-zhuang Guo et al. Nanoscale
- On the origin of the stability of graphene oxide membranes in water
- (2015) Che-Ning Yeh et al. Nature Chemistry
- UV-assisted three-dimensional printing of polymer nanocomposites based on inorganic fillers
- (2015) Giovanni Postiglione et al. POLYMER COMPOSITES
- Active mixing of complex fluids at the microscale
- (2015) Thomas J. Ober et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Additive manufacturing for the food industry
- (2015) Jeffrey I. Lipton et al. TRENDS IN FOOD SCIENCE & TECHNOLOGY
- Structural optimization of 3D-printed synthetic spider webs for high strength
- (2015) Zhao Qin et al. Nature Communications
- Highly compressible 3D periodic graphene aerogel microlattices
- (2015) Cheng Zhu et al. Nature Communications
- Multimaterial magnetically assisted 3D printing of composite materials
- (2015) Dimitri Kokkinis et al. Nature Communications
- Self-healable, super tough graphene oxide–poly(acrylic acid) nanocomposite hydrogels facilitated by dual cross-linking effects through dynamic ionic interactions
- (2015) Ming Zhong et al. Journal of Materials Chemistry B
- Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels
- (2015) T. J. Hinton et al. Science Advances
- Engineering an in vitro air-blood barrier by 3D bioprinting
- (2015) Lenke Horváth et al. Scientific Reports
- Toward Macroscale, Isotropic Carbons with Graphene-Sheet-Like Electrical and Mechanical Properties
- (2014) Marcus A. Worsley et al. ADVANCED FUNCTIONAL MATERIALS
- Direct Writing of Gallium-Indium Alloy for Stretchable Electronics
- (2014) J. William Boley et al. ADVANCED FUNCTIONAL MATERIALS
- Three-Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness
- (2014) Eric B. Duoss et al. ADVANCED FUNCTIONAL MATERIALS
- 3D Printing: 3D-Printing of Lightweight Cellular Composites (Adv. Mater. 34/2014)
- (2014) Brett G. Compton et al. ADVANCED MATERIALS
- 3D-Printing of Lightweight Cellular Composites
- (2014) Brett G. Compton et al. ADVANCED MATERIALS
- 3D Bioprinting of Vascularized, Heterogeneous Cell-Laden Tissue Constructs
- (2014) David B. Kolesky et al. ADVANCED MATERIALS
- Numerical investigation of channel blockage by flowing microparticles
- (2014) Gbedo Constant Agbangla et al. COMPUTERS & FLUIDS
- Structuring adsorbents and catalysts by processing of porous powders
- (2014) Farid Akhtar et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Properties of Polylactide Inks for Solvent-Cast Printing of Three-Dimensional Freeform Microstructures
- (2014) Shuang-Zhuang Guo et al. LANGMUIR
- 3D graphene supported MoO2 for high performance binder-free lithium ion battery
- (2014) Zhi Xiang Huang et al. Nanoscale
- Manufacture of β-TCP/alginate scaffolds through a Fab@home model for application in bone tissue engineering
- (2014) G S Diogo et al. Biofabrication
- Effect of Polymer Infiltration on the Flexural Behavior of β-Tricalcium Phosphate Robocast Scaffolds
- (2014) Francisco Martínez-Vázquez et al. Materials
- Mineralized biomimetic collagen/alginate/silica composite scaffolds fabricated by a low-temperature bio-plotting process for hard tissue regeneration: fabrication, characterisation and in vitro cellular activities
- (2014) HyeongJin Lee et al. Journal of Materials Chemistry B
- 3D-printed magnetic Fe3O4/MBG/PCL composite scaffolds with multifunctionality of bone regeneration, local anticancer drug delivery and hyperthermia
- (2014) Jianhua Zhang et al. Journal of Materials Chemistry B
- Development and characterisation of a new bioink for additive tissue manufacturing
- (2014) Ferry P. W. Melchels et al. Journal of Materials Chemistry B
- Graphene oxide dispersions: tuning rheology to enable fabrication
- (2014) Sina Naficy et al. Materials Horizons
- Mechanical properties of bioactive glass (13-93) scaffolds fabricated by robotic deposition for structural bone repair
- (2013) Xin Liu et al. Acta Biomaterialia
- 3D Printing of Free Standing Liquid Metal Microstructures
- (2013) Collin Ladd et al. ADVANCED MATERIALS
- 3D Printing of Interdigitated Li-Ion Microbattery Architectures
- (2013) Ke Sun et al. ADVANCED MATERIALS
- The 3D printing of gelatin methacrylamide cell-laden tissue-engineered constructs with high cell viability
- (2013) Thomas Billiet et al. BIOMATERIALS
- Evaluation of Cell Viability and Functionality in Vessel-like Bioprintable Cell-Laden Tubular Channels
- (2013) Yin Yu et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
- Liquid-Phase Gallium–Indium Alloy Electronics with Microcontact Printing
- (2013) Arya Tabatabai et al. LANGMUIR
- Solvent-Cast Three-Dimensional Printing of Multifunctional Microsystems
- (2013) Shuang-Zhuang Guo et al. Small
- High-resolution PLA-based composite scaffolds via 3-D printing technology
- (2012) T. Serra et al. Acta Biomaterialia
- High-Throughput Printing via Microvascular Multinozzle Arrays
- (2012) Christopher J. Hansen et al. ADVANCED MATERIALS
- Hardened properties of high-performance printing concrete
- (2012) T.T. Le et al. CEMENT AND CONCRETE RESEARCH
- Additive manufacturing and its societal impact: a literature review
- (2012) Samuel H. Huang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Geometrically Complex Silicon Carbide Structures Fabricated by Robocasting
- (2012) Kunpeng Cai et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Direct-write assembly of silicate and borate bioactive glass scaffolds for bone repair
- (2012) Aylin M. Deliormanlı et al. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
- Direct-write fabrication of freestanding nanocomposite strain sensors
- (2012) Rouhollah Dermanaki Farahani et al. NANOTECHNOLOGY
- Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration
- (2011) Qiang Fu et al. Acta Biomaterialia
- Bioinspired Strong and Highly Porous Glass Scaffolds
- (2011) Qiang Fu et al. ADVANCED FUNCTIONAL MATERIALS
- Photocurable Liquid Core-Fugitive Shell Printing of Optical Waveguides
- (2011) David J. Lorang et al. ADVANCED MATERIALS
- Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces
- (2011) Jacob J. Adams et al. ADVANCED MATERIALS
- Omnidirectional Printing of 3D Microvascular Networks
- (2011) Willie Wu et al. ADVANCED MATERIALS
- Developments in construction-scale additive manufacturing processes
- (2011) S. Lim et al. AUTOMATION IN CONSTRUCTION
- Thixotropic rheology of concentrated alumina colloidal gels for solid freeform fabrication
- (2011) Cheng Zhu et al. JOURNAL OF RHEOLOGY
- Characterization and modeling of direct-write fabrication of microscale polymer fibers
- (2011) Scott M. Berry et al. POLYMER
- Printed Origami Structures
- (2010) Bok Yeop Ahn et al. ADVANCED MATERIALS
- Polymer-Derived Ceramics: 40 Years of Research and Innovation in Advanced Ceramics
- (2010) Paolo Colombo et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Cluster formation and growth in microchannel flow of dilute particle suspensions
- (2010) Tarun Gudipaty et al. Microfluidics and Nanofluidics
- Load partitioning in Al2O3–Al composites with three-dimensional periodic architecture
- (2009) M.L. Young et al. ACTA MATERIALIA
- Direct-Write Assembly of 3D Hydrogel Scaffolds for Guided Cell Growth
- (2009) Robert A. Barry et al. ADVANCED MATERIALS
- Ultraviolet-Assisted Direct-Write Fabrication of Carbon Nanotube/Polymer Nanocomposite Microcoils
- (2009) Louis Laberge Lebel et al. ADVANCED MATERIALS
- Scaffold-free vascular tissue engineering using bioprinting
- (2009) Cyrille Norotte et al. BIOMATERIALS
- Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
- (2009) B. Y. Ahn et al. SCIENCE
- Graphene Oxide Papers Modified by Divalent Ions—Enhancing Mechanical Properties via Chemical Cross-Linking
- (2008) Sungjin Park et al. ACS Nano
- Direct‐Write Assembly of Microperiodic Silk Fibroin Scaffolds for Tissue Engineering Applications
- (2008) Sourabh Ghosh et al. ADVANCED FUNCTIONAL MATERIALS
- Effect of temperature and cross-linking density on rheology of chemical cross-linked guar gum at the gel point
- (2008) Chiara Sandolo et al. FOOD HYDROCOLLOIDS
- Modeling and control of fluid dispensing processes: a state-of-the-art review
- (2008) X. B. Chen INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effect of materials and modelling on the design of the space-based lightweight mirror
- (2008) Shaowen Guo et al. MATERIALS & DESIGN
- Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
- (2007) Pedro Miranda et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExplorePublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More