Progress and perspectives in laser additive manufacturing of key aeroengine materials
出版年份 2021 全文链接
标题
Progress and perspectives in laser additive manufacturing of key aeroengine materials
作者
关键词
Laser additive manufacturing, Advanced high-strength steel, Nickel-based superalloy, Titanium alloy, Process development, Microstructure, Mechanical properties
出版物
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
Volume 170, Issue -, Pages 103804
出版商
Elsevier BV
发表日期
2021-09-30
DOI
10.1016/j.ijmachtools.2021.103804
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Mechanical properties estimation of additively manufactured metal components using femtosecond laser ultrasonics and laser polishing
- (2021) Seong-Hyun Park et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Microstructure and room-temperature tensile property of Ti-5.7Al-4.0Sn-3.5Zr-0.4Mo-0.4Si-0.4Nb-1.0Ta-0.05C with near equiaxed β grain fabricated by laser directed energy deposition technique
- (2021) MengCheng Deng et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Additive manufacturing of multi-scale heterostructured high-strength steels
- (2021) Chaolin Tan et al. Materials Research Letters
- A numerical study on the packing quality of fibre/polymer composite powder for powder bed fusion additive manufacturing
- (2021) Pengfei Tan et al. Virtual and Physical Prototyping
- Powder Bed Fusion of nickel-based superalloys: A review
- (2021) Salomé Sanchez et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Additive manufacturing of bio-inspired multi-scale hierarchically strengthened lattice structures
- (2021) Chaolin Tan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Porosity inspection in directed energy deposition additive manufacturing based on transient thermoreflectance measurement
- (2021) Peipei Liu et al. NDT & E INTERNATIONAL
- Mechanism of Stress Relaxation and Phase Transformation in Additively Manufactured Ti-6Al-4V via in situ High Temperature XRD and TEM Analyses
- (2020) F.R. Kaschel et al. ACTA MATERIALIA
- Review on direct metal laser deposition manufacturing technology for the Ti-6Al-4V alloy
- (2020) P. N. Sibisi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of selective laser melting build orientations on the microstructure and tensile performance of Ti–6Al–4V alloy
- (2020) Zongyu Xie et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A trade-off between powder layer thickness and mechanical properties in additively manufactured maraging steels
- (2020) SeyedAmirReza Shamsdini et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Grain structure control during metal 3D printing by high-intensity ultrasound
- (2020) C. J. Todaro et al. Nature Communications
- Laser Metal Deposition of Ti6Al4V—A Brief Review
- (2020) Chongliang Zhong et al. Applied Sciences-Basel
- Microstructure characteristics and mechanical behaviour of a selective laser melted Inconel 718 alloy
- (2020) Liang Huang et al. Journal of Materials Research and Technology-JMR&T
- Microstructure and tensile fracture behavior of three-stage heat treated inconel 718 alloy produced via laser powder bed fusion process
- (2020) Jun-Ren Zhao et al. Journal of Materials Research and Technology-JMR&T
- Solidification Effect on the Microstructure and Mechanism of Laser‐Solid‐Forming‐Produced Flame‐Resistant Ti–35V–15Cr Alloy
- (2020) Hua Tan et al. ADVANCED ENGINEERING MATERIALS
- Thermodynamics analysis and rapid solidification of laser polished Inconel 718 by selective laser melting
- (2020) Yuhang Li et al. APPLIED SURFACE SCIENCE
- Improved fatigue strength of additively manufactured Ti6Al4V by surface post processing
- (2020) M. Kahlin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Novel local shielding approach for the laser welding based additive manufacturing of large structural space components from titanium
- (2020) N. Kolsch et al. JOURNAL OF LASER APPLICATIONS
- Microstructure and tensile properties of DD32 single crystal Ni-base superalloy repaired by laser metal forming
- (2020) Shiwei Ci et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of energy density on the microstructure and texture evolution of Ti-6Al-4V manufactured by laser powder bed fusion
- (2020) C.M. Cepeda-Jiménez et al. MATERIALS CHARACTERIZATION
- Microstructure and mechanical properties at room and elevated temperature of crack-free Hastelloy X fabricated by laser powder bed fusion
- (2020) O. Sanchez-Mata et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of high chromium nickel-based superalloy fabricated by laser metal deposition
- (2020) Kaiming Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tailored microstructure and enhanced comprehensive mechanical properties of selective laser melted Ti-40Al-9V-0.5Y alloy after aging treatment
- (2020) Piao Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Variations in ambient and elevated temperature mechanical behavior of IN718 manufactured by selective laser melting via process parameter control
- (2020) Tait D. McLouth et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Analysis of the effect of internal defects on fatigue performance of additive manufactured metals
- (2020) Niloofar Sanaei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Study of the microstructure and mechanical performance of C-X stainless steel processed by selective laser melting (SLM)
- (2020) Xingchen Yan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Refinement of the grain structure of additive manufactured titanium alloys via epitaxial recrystallization enabled by rapid heat treatment
- (2020) Zhiyi Zou et al. SCRIPTA MATERIALIA
- Metal 3D printing as a disruptive technology for superalloys
- (2020) Chinnapat Panwisawas et al. Nature Communications
- Machine learning assisted design of γ′-strengthened Co-base superalloys with multi-performance optimization
- (2020) Pei Liu et al. npj Computational Materials
- Torsional behavior of additively manufactured nickel alloy 718 under monotonic loading and low cycle fatigue
- (2020) Volodymyr P. Sabelkin et al. Materials Today Communications
- Electrochemical dissolution behavior of heat treated laser solid formed Inconel718
- (2020) Yufeng Zhang et al. CORROSION SCIENCE
- A comparative study of laser metal deposited and forged Ti-6Al-4V alloy: Uniaxial mechanical response and vibration fatigue properties
- (2020) Sihan Zhao et al. INTERNATIONAL JOURNAL OF FATIGUE
- A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy
- (2020) Y.N. Hu et al. INTERNATIONAL JOURNAL OF FATIGUE
- Multiaxial fatigue of LB-PBF additive manufactured 17–4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy
- (2020) Reza Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effects of surface roughness and build thickness on fatigue properties of selective laser melted Inconel 718 at 650 °C
- (2020) H.Y. Wan et al. INTERNATIONAL JOURNAL OF FATIGUE
- The effect of defects and notches in quasi-static and fatigue loading of Inconel 718 specimens produced by selective laser melting
- (2020) Klas Solberg et al. INTERNATIONAL JOURNAL OF FATIGUE
- Very-high-cycle fatigue behavior of Ti-6Al-4V manufactured by selective laser melting: Effect of build orientation
- (2020) Guian Qian et al. INTERNATIONAL JOURNAL OF FATIGUE
- In-situ synthesised interlayer enhances bonding strength in additively manufactured multi-material hybrid tooling
- (2020) Chaolin Tan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: Advantages, challenges and opinion for future development
- (2020) Hooyar Attar et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural evolution and mechanical performances of selective laser melting Inconel 718 from low to high laser power
- (2020) Huihui Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural evolution and mechanical properties of 300M steel produced by low and high power selective laser melting
- (2020) Guanyi Jing et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Design and development of a high-performance Ni-based superalloy WSU 150 for additive manufacturing
- (2020) Praveen Sreeramagiri et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- IN100 Ni-based superalloy fabricated by micro-laser aided additive manufacturing: Correlation of the microstructure and fracture mechanism
- (2020) Fei Weng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of an Fe–Cr–Ni–Al maraging stainless steel: Microstructure evolution, heat treatment, and strengthening mechanisms
- (2020) Amir Hadadzadeh et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Impact of hot isostatic pressing on the mechanical and microstructural properties of additively manufactured Ti–6Al–4V fabricated using directed energy deposition
- (2020) J.S. Keist et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-strength Damascus steel by additive manufacturing
- (2020) Philipp Kürnsteiner et al. NATURE
- Effects of process parameters on the microstructure and mechanical properties of 24CrNiMo steel fabricated by selective laser melting
- (2020) Qing Wang et al. OPTICS AND LASER TECHNOLOGY
- Gradient microstructure and vibration fatigue properties of 2024-T351 aluminium alloy treated by laser shock peening
- (2020) Xian-kai Meng et al. SURFACE & COATINGS TECHNOLOGY
- The effect of manufacturing defects on the fatigue life of selective laser melted Ti-6Al-4V structures
- (2020) Y.N. Hu et al. MATERIALS & DESIGN
- An analysis of fatigue failure mechanisms in an additively manufactured and shot peened IN 718 nickel superalloy
- (2020) Enrico Salvati et al. MATERIALS & DESIGN
- The crack and pore formation mechanism of Ti–47Al–2Cr–2Nb alloy fabricated by selective laser melting
- (2020) Xuezhi Shi et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- High oxygen-content titanium and titanium alloys made from powder
- (2020) S.D. Luo et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive manufacturing of steel–copper functionally graded material with ultrahigh bonding strength
- (2020) Chaolin Tan et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Fatigue Characteristics of Steels Manufactured by Selective Laser Melting
- (2019) Shahriar Afkhami et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 718
- (2019) Arun Ramanathan Balachandramurthi et al. MATERIALS CHARACTERIZATION
- Damage-tolerant architected materials inspired by crystal microstructure
- (2019) Minh-Son Pham et al. NATURE
- A metallurgical phase transformation framework applied to SLM additive manufacturing processes
- (2019) Qi Zhang et al. MATERIALS & DESIGN
- Microstructure and mechanical properties of Hastelloy X produced by HP-SLM (high power selective laser melting)
- (2019) Maria L. Montero-Sistiaga et al. MATERIALS & DESIGN
- Effect of heat treatment on the microstructural evolution of a precipitation-hardened superalloy produced by selective laser melting
- (2019) Mang Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of direct laser metal deposited Haynes 282 superalloy
- (2019) A. Ramakrishnan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improvement of densification and microstructure of ASTM A131 EH36 steel samples additively manufactured via selective laser melting with varying laser scanning speed and hatch spacing
- (2019) Jingjing Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Build Orientation Effects on Texture and Mechanical Properties of Selective Laser Melting Inconel 718
- (2019) G. E. Bean et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Crack Paths in Additive Manufactured Metallic Materials Subjected to Multiaxial Cyclic Loads Including Surface Roughness, HIP, and Notch Effects
- (2019) Reza Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- A Review on Biomedical Titanium Alloys: Recent Progress and Prospect
- (2019) Lai‐Chang Zhang et al. ADVANCED ENGINEERING MATERIALS
- Investigation on solid-state phase transformation in a Ti-47Al-2Cr-2V alloy due to thermal cycling during laser additive manufacturing process
- (2019) Yu Wu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of laser energy density on the microstructure, mechanical properties, and deformation of Inconel 718 samples fabricated by selective laser melting
- (2019) J.H. Yi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Additive manufacturing of Ti–6Al–4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties
- (2019) Abolfazl Azarniya et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effects of heat treatment and build orientations on the fatigue life of selective laser melted 15-5 PH stainless steel
- (2019) Sagar Sarkar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- An experimental study of residual stress and direction-dependence of fatigue crack growth behaviour in as-built and stress-relieved selective-laser-melted Ti6Al4V
- (2019) Abdul Khadar Syed et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of build orientation on microstructure, mechanical and corrosion behavior of Inconel 718 processed by selective laser melting
- (2019) Dafan Du et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Evolution of microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments
- (2019) Holly D. Carlton et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625
- (2019) C.J. Hassila et al. WEAR
- Fatigue strength improvement of selective laser melted Ti6Al4V using ultrasonic surface mechanical attrition
- (2019) Xingchen Yan et al. Materials Research Letters
- Directed Energy Deposition versus Wrought Ti-6Al-4V: A Comparison of Microstructure, Fatigue Behavior, and Notch Sensitivity
- (2019) Seyed Mohammad Javad Razavi et al. ADVANCED ENGINEERING MATERIALS
- Materials for Automotive Lightweighting
- (2019) Alan Taub et al. Annual Review of Materials Research
- Numerical modelling of surface roughness effect on the fatigue behavior of Ti-6Al-4V obtained by additive manufacturing
- (2019) Bastien Vayssette et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue crack branching in laser melting deposited Ti–55511 alloy
- (2019) Kai Wang et al. INTERNATIONAL JOURNAL OF FATIGUE
- The influence of additive manufacturing processing parameters on surface roughness and fatigue life
- (2019) Joy Gockel et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment
- (2019) P.D. Nezhadfar et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser Powder Bed Fusion of Ti-rich TiNi lattice structures: Process optimisation, geometrical integrity, and phase transformations
- (2019) Chaolin Tan et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Influence of heat treatment on microstructures and mechanical properties of K447A cladding layers obtained by laser solid forming
- (2019) Zhenlin Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Solid-state phase transformation of TC11 titanium during unstable thermal cycling in laser melting deposition process
- (2019) Xiao-dong Li et al. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL
- Microscopic investigation of as built and hot isostatic pressed Hastelloy X processed by Selective Laser Melting
- (2019) Saeid Pourbabak et al. MATERIALS CHARACTERIZATION
- Mechanisms driving high-cycle fatigue life of as-built Inconel 718 processed by laser powder bed fusion
- (2019) Dillon S. Watring et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Assessment of mechanical properties and fatigue performance of a selective laser melted nickel-base superalloy Inconel 718
- (2019) Changhao Pei et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of microstructure features and mechanical properties for additive manufactured and wrought nickel alloys 625
- (2019) J. Nguejio et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
- (2019) Nesma T. Aboulkhair et al. PROGRESS IN MATERIALS SCIENCE
- Alloys for Aeronautic Applications: State of the Art and Perspectives
- (2019) Antonio Gloria et al. Metals
- Influence of energy density on macro/micro structures and mechanical properties of as-deposited Inconel 718 parts fabricated by laser engineered net shaping
- (2019) Zhichao Liu et al. Journal of Manufacturing Processes
- Strong and ductile reduced activation ferritic/martensitic steel additively manufactured by selective laser melting
- (2019) M. G. Jiang et al. Materials Research Letters
- Additive manufacturing of dense components in beta‑titanium alloys with crystallographic texture from a mixture of pure metallic element powders
- (2019) Takeshi Nagase et al. MATERIALS & DESIGN
- Prediction of fatigue limit in additively manufactured Ti-6Al-4V alloy at elevated temperature
- (2019) Toshifumi Kakiuchi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Cyclic plastic behavior of additively manufactured Ti-6Al-4V under uniaxial and multiaxial non-proportional loading
- (2019) Stefano Bressan et al. INTERNATIONAL JOURNAL OF FATIGUE
- Effect of heat treatment on the microstructural evolution and mechanical properties of GH4099 additive-manufactured by directed energy deposition
- (2019) Y.L. Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and property of a selective laser melting process induced oxide dispersion strengthened 17-4 PH stainless steel
- (2019) Tzu-Hou Hsu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural Evolution and Properties of 24CrNiMoY Alloy Steel Fabricated by Selective Laser Melting
- (2019) Lianyun Xi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Selective laser melting of Ti-5Al-2.5Sn alloy with isotropic tensile properties: The combined effect of densification state, microstructural morphology, and crystallographic orientation characteristics
- (2019) Kaiwen Wei et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions
- (2019) Jungsub Lee et al. MATERIALS CHARACTERIZATION
- Effect of post heat treatment on microstructure and mechanical properties of Ni-based composites by selective laser melting
- (2019) Hongmei Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Additive manufacturing of functionally graded materials: A review
- (2019) Chi Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Understanding the effects of PBF process parameter interplay on Ti-6Al-4V surface properties
- (2019) Trina Majumdar et al. PLoS One
- Heterogeneously tempered martensitic high strength steel by selective laser melting and its micro-lattice: Processing, microstructure, superior performance and mechanisms
- (2019) Xinwei Li et al. MATERIALS & DESIGN
- Short-term creep behavior of an additive manufactured non-weldable Nickel-base superalloy evaluated by slow strain rate testing
- (2019) Jinghao Xu et al. ACTA MATERIALIA
- Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions
- (2019) Benjamin Wahlmann et al. ACTA MATERIALIA
- Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity
- (2019) J.-R. Poulin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Smooth and notch fatigue behavior of selectively laser melted Inconel 718 with as-built surfaces
- (2019) Gianni Nicoletto INTERNATIONAL JOURNAL OF FATIGUE
- Orientation dependent fatigue performance and mechanisms of selective laser melted maraging steel X3NiCoMoTi18-9-5
- (2019) James Damon et al. INTERNATIONAL JOURNAL OF FATIGUE
- Laser melting deposition of K403 superalloy: The influence of processing parameters on the microstructure and wear performance
- (2019) Heyu Song et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and grain growth direction of SRR99 single-crystal superalloy by selective laser melting
- (2019) Jingjing Yang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of solution temperature on static recrystallization and ductility of Inconel 625 superalloy fabricated by directed energy deposition
- (2019) Y.L. Hu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting
- (2019) Jiangwei Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of δ phase on high temperature mechanical performances of Inconel 718 fabricated with SLM process
- (2019) Yang Gao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Mitigation of anisotropic fatigue in nickel alloy 718 manufactured via selective laser melting
- (2019) Volodymyr P. Sabelkin et al. MATERIALS & DESIGN
- An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties
- (2019) Raiyan Seede et al. ACTA MATERIALIA
- Effects of build direction on tensile and fatigue performance of selective laser melting Ti6Al4V titanium alloy
- (2019) Wenbo Sun et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of surface conditions and specimen orientation on high cycle fatigue properties of Inconel 718 prepared by laser powder bed fusion
- (2019) David B. Witkin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue strength prediction of laser powder bed fusion processed Inconel 625 specimens with intentionally-seeded porosity: Feasibility study
- (2019) J.-R. Poulin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Novel specimen geometries for fatigue testing of additive manufactured metals under axial, torsion, and combined axial-torsion loadings
- (2019) Ali Fatemi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of deposition strategy on the microstructure and fatigue properties of laser metal deposited Ti-6Al-4V powder on Ti-6Al-4V substrate
- (2019) Yi Rye Choi et al. INTERNATIONAL JOURNAL OF FATIGUE
- High-performance integrated additive manufacturing with laser shock peening –induced microstructural evolution and improvement in mechanical properties of Ti6Al4V alloy components
- (2019) Jinzhong Lu et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Customizing mechanical properties of additively manufactured Hastelloy X parts by adjusting laser scanning speed
- (2019) Reza Esmaeilizadeh et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructural tailoring of As-Selective Laser Melted Ti6Al4V alloy for high mechanical properties
- (2019) Yangli Xu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing
- (2019) Zhen Chen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The influence of pulsed laser powder bed fusion process parameters on Inconel 718 material properties
- (2019) Konstantinos Georgilas et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and elevated temperature mechanical properties of IN718 alloy fabricated by laser metal deposition
- (2019) Yaocheng Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of different scanning strategies on microstructural evolution to 24CrNiMo alloy steel during direct laser deposition
- (2019) Xuan Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of rene 41 alloy manufactured by laser powder bed fusion
- (2019) Sıla Ece Atabay et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Electrochemical Polishing of Additively Manufactured Ti–6Al–4V Alloy
- (2019) Yifei Zhang et al. METALS AND MATERIALS INTERNATIONAL
- Strengthening and hardening mechanisms of additively manufactured stainless steels: The role of cell sizes
- (2019) Zan Li et al. SCRIPTA MATERIALIA
- Selective laser melting and heat treatment of precipitation hardening stainless steel with a refined microstructure and excellent mechanical properties
- (2019) X.D. Nong et al. SCRIPTA MATERIALIA
- On the Use of Functionally Graded Materials to Differentiate the Effects of Surface Severe Plastic Deformation, Roughness and Chemical Composition on Cell Proliferation
- (2019) Laurent Weiss et al. Metals
- Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
- (2019) Xiaoqiang Zhang et al. MATERIALS & DESIGN
- SLM lattice structures: Properties, performance, applications and challenges
- (2019) Tobias Maconachie et al. MATERIALS & DESIGN
- On the size and orientation effect in additive manufactured Ti-6Al-4V
- (2019) D. Barba et al. MATERIALS & DESIGN
- Effect of solution and aging treatments on corrosion performance of laser solid formed Ti-6Al-4V alloy in a 3.5 wt. % NaCl solution
- (2019) Xiawei Yang et al. Journal of Materials Research and Technology-JMR&T
- Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing
- (2019) Quanquan Han et al. OPTICS AND LASER TECHNOLOGY
- Solid-state cold spraying of Ti and its alloys: A literature review
- (2019) Wenya Li et al. PROGRESS IN MATERIALS SCIENCE
- A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitates
- (2018) L. Sun et al. ACTA MATERIALIA
- Electrochemical behavior of Inconel 718 fabricated by laser solid forming on different sections
- (2018) Pengfei Guo et al. CORROSION SCIENCE
- Microstructure and electrochemical anodic behavior of Inconel 718 fabricated by high-power laser solid forming
- (2018) Pengfei Guo et al. ELECTROCHIMICA ACTA
- Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions
- (2018) J.-R. Poulin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Study of Selective Laser Melting of intermetallic TiAl powder using integral analysis
- (2018) Maria Doubenskaia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: A review
- (2018) Hooyar Attar et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments
- (2018) M.J. Bermingham et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening
- (2018) Sihai Luo et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The initiation and propagation mechanism of the overlapping zone cracking during laser solid forming of IN-738LC superalloy
- (2018) Jianjun Xu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of laser power on the microstructure and mechanical properties of heat treated Inconel 718 superalloy by laser solid forming
- (2018) Lin Zhu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A review on fundamental of high entropy alloys with promising high–temperature properties
- (2018) Jian Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of solution heat treatment on microstructure and tensile properties of Inconel 718 formed by high-deposition-rate laser metal deposition
- (2018) Shang Sui et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Deep learning for smart manufacturing: Methods and applications
- (2018) Jinjiang Wang et al. JOURNAL OF MANUFACTURING SYSTEMS
- Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4V
- (2018) Haider Ali et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts
- (2018) Imade Koutiri et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Creep behaviour of inconel 718 processed by laser powder bed fusion
- (2018) Zhengkai Xu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Dwell-fatigue crack propagation in additive manufactured Hastelloy X
- (2018) Jonas Saarimäki et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fatigue properties of Ti-6.5Al-3.5Mo-l.5Zr-0.3Si alloy produced by direct laser deposition
- (2018) Zheng Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Comparison of microstructures and mechanical properties of Inconel 718 alloy processed by selective laser melting and casting
- (2018) Dongyun Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism
- (2018) Quanquan Han et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of heat treatments on microstructure evolution and mechanical properties of Inconel 625 processed by laser powder bed fusion
- (2018) Giulio Marchese et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
- (2018) Dunyong Deng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of stainless steel CX manufactured by Direct Metal Laser Sintering
- (2018) Hamed Asgari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Decomposition of deformed α′(α″) martensitic phase in Ti–6Al–4V alloy
- (2018) Maciej Motyka et al. MATERIALS SCIENCE AND TECHNOLOGY
- Dislocation network in additive manufactured steel breaks strength–ductility trade-off
- (2018) Leifeng Liu et al. Materials Today
- Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718
- (2018) Benjamin Shassere et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of processing parameters on microstructure of laser solid forming Inconel 718 superalloy
- (2018) L. Zhu et al. OPTICS AND LASER TECHNOLOGY
- Selective laser melting of 24CrNiMo steel for brake disc: Fabrication efficiency, microstructure evolution, and properties
- (2018) Mingwei Wei et al. OPTICS AND LASER TECHNOLOGY
- Control of microstructure and mechanical properties of laser solid formed Inconel 718 superalloy by electromagnetic stirring
- (2018) Fencheng Liu et al. OPTICS AND LASER TECHNOLOGY
- Additive manufacturing of metallic components – Process, structure and properties
- (2018) T. DebRoy et al. PROGRESS IN MATERIALS SCIENCE
- Achieving superior ductility for laser solid formed extra low interstitial Ti-6Al-4V titanium alloy through equiaxial alpha microstructure
- (2018) Zhuang Zhao et al. SCRIPTA MATERIALIA
- In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substrates
- (2018) Shi Da Sun et al. SURFACE & COATINGS TECHNOLOGY
- Influence of heat treatments on microstructure and mechanical properties of laser additive manufacturing Ti-5Al-2Sn-2Zr-4Mo-4Cr titanium alloy
- (2018) Yan-yan ZHU et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Mechanism of heat affected zone cracking in Ni-based superalloy DZ125L fabricated by laser 3D printing technique
- (2018) Yao Li et al. MATERIALS & DESIGN
- The spatial distribution of α phase in laser melting deposition additive manufactured Ti-10V-2Fe-3Al alloy
- (2018) Zongge Jiao et al. MATERIALS & DESIGN
- Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel
- (2018) James Mutua et al. MATERIALS & DESIGN
- A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
- (2018) Haniyeh Fayazfar et al. MATERIALS & DESIGN
- Significance of hot isostatic pressing (HIP) on multiaxial deformation and fatigue behaviors of additive manufactured Ti-6Al-4V including build orientation and surface roughness effects
- (2018) Reza Molaei et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of defects, surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing
- (2018) Hiroshige Masuo et al. INTERNATIONAL JOURNAL OF FATIGUE
- Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting
- (2018) Yoichi Yamashita et al. INTERNATIONAL JOURNAL OF FATIGUE
- Hardness, grainsize and porosity formation prediction on the Laser Metal Deposition of AISI 304 stainless steel
- (2018) Jon Iñaki Arrizubieta et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Densification behavior, microstructure evolution, and mechanical performances of selective laser melted Ti-5Al-2.5Sn α titanium alloy: Effect of laser energy input
- (2018) Kaiwen Wei et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Evolution of solidification microstructure and dynamic recrystallisation of Inconel 625 during laser solid forming process
- (2018) Y. L. Hu et al. JOURNAL OF MATERIALS SCIENCE
- Fatigue behavior of Ti-6Al-4V cellular structures fabricated by additive manufacturing technique
- (2018) Dechun Ren et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel
- (2018) Tarun Bhardwaj et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of defects and as-built surface roughness on fatigue properties of additively manufactured Alloy 718
- (2018) Arun Ramanathan Balachandramurthi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Impact of composition on the heat treatment response of additively manufactured 17–4 PH grade stainless steel
- (2018) S.D. Meredith et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
- (2018) K. Moussaoui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropy of nickel-based superalloy K418 fabricated by selective laser melting
- (2018) Zhen Chen et al. Progress in Natural Science-Materials International
- High Ductility in a fully martensitic microstructure: a paradox in a Ti alloy produced by selective laser melting
- (2018) A. Zafari et al. Materials Research Letters
- Effects of heat treatment on microstructure and creep properties of a laser powder bed fused nickel superalloy
- (2018) S.J. Davies et al. MATERIALS & DESIGN
- Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness
- (2018) Rushikesh Sabban et al. ACTA MATERIALIA
- Microstructures and stress rupture properties of pulse laser repaired Inconel 718 superalloy after different heat treatments
- (2018) Shang Sui et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Controlling martensitic decomposition during selective laser melting to achieve best ductility in high strength Ti-6Al-4V
- (2018) A. Zafari et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Direct laser metal deposition of Inconel 738
- (2018) A. Ramakrishnan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser beam melting and heat-treatment of 1.2343 (AISI H11) tool steel – microstructure and mechanical properties
- (2018) Florian Huber et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting
- (2018) Mei Wang et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing
- (2018) Zhipeng Zhou et al. MATERIALS & DESIGN
- Microstructure formation of Ti-6Al-4 V in synchronous induction assisted laser deposition
- (2018) Wei Fan et al. MATERIALS & DESIGN
- Additive manufacturing of Ti6Al4V alloy: A review
- (2018) Shunyu Liu et al. MATERIALS & DESIGN
- Effects of microstructure on fatigue crack propagation behavior in a bi-modal TC11 titanium alloy fabricated via laser additive manufacturing
- (2018) Yafei Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of processing conditions on the microstructure, porosity, and mechanical properties of Ti-6Al-4V repair fabricated by directed energy deposition
- (2018) Nathan A. Kistler et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Characterization of Inconel 625 fabricated using powder-bed-based additive manufacturing technologies
- (2018) J.A. Gonzalez et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Solidification behavior and grain morphology of laser additive manufacturing titanium alloys
- (2018) Yan-Yan Zhu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
- (2018) Shang Sui et al. ACTA MATERIALIA
- Strengthening mechanisms in directed energy deposited austenitic stainless steel
- (2018) Thale R. Smith et al. ACTA MATERIALIA
- Experimental evaluation on elevated temperature fatigue and tensile properties of one selective laser melted nickel based superalloy
- (2018) Z.H. Jiao et al. INTERNATIONAL JOURNAL OF FATIGUE
- Investigation of remelting and preheating in SLM of 18Ni300 maraging steel as corrective and preventive measures for porosity reduction
- (2017) Ali Gökhan Demir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The failure mechanism of 50% laser additive manufactured Inconel 718 and the deformation behavior of Laves phases during a tensile process
- (2017) Shang Sui et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting
- (2017) Maciej Mazur et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
- (2017) Aref Yadollahi et al. INTERNATIONAL JOURNAL OF FATIGUE
- Characterization of bending vibration fatigue of SLM fabricated Ti-6Al-4V
- (2017) Benjamin Ellyson et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue life of additively manufactured Ti–6Al–4V in the very high cycle fatigue regime
- (2017) J. Günther et al. INTERNATIONAL JOURNAL OF FATIGUE
- Fatigue behaviour of notched additive manufactured Ti6Al4V with as-built surfaces
- (2017) M. Kahlin et al. INTERNATIONAL JOURNAL OF FATIGUE
- A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping of stainless steel
- (2017) Weilong Cong et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy
- (2017) Mujian Xia et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Experimental optimization of laser additive manufacturing process of single-crystal nickel-base superalloys by a statistical experiment design method
- (2017) Yao-Jian Liang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- ω-assisted α phase and hardness of Ti-5Al-5Mo-5V-1Cr-1Fe during low temperature isothermal heat treatment after laser surface remelting
- (2017) Bei He et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure of nickel-base superalloy MAR-M247 additively manufactured through scanning laser epitaxy (SLE)
- (2017) Amrita Basak et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting
- (2017) Jyoti Suryawanshi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of Ti addition on cracking and microhardness of Inconel 625 during the laser solid forming processing
- (2017) Y.L. Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Process Evaluation of AISI 4340 Steel Manufactured by Laser Powder Bed Fusion
- (2017) Elias Jelis et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Microstructure characterization of recycled IN718 powder and resulting laser clad material
- (2017) Mario Renderos et al. MATERIALS CHARACTERIZATION
- Effects of laser modes on Nb segregation and Laves phase formation during laser additive manufacturing of nickel-based superalloy
- (2017) H. Xiao et al. MATERIALS LETTERS
- The tensile deformation behavior of laser repaired Inconel 718 with a non-uniform microstructure
- (2017) Shang Sui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting
- (2017) Yuchao Bai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Formation mechanism of the α variant and its influence on the tensile properties of laser solid formed Ti-6Al-4V titanium alloy
- (2017) Zhuang Zhao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructural characteristics and mechanical properties of laser solid formed K465 superalloy
- (2017) Qiuge Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Anisotropic tensile behavior of in situ precipitation strengthened Inconel 718 fabricated by additive manufacturing
- (2017) Mang Ni et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The effect of preheating on microstructure and mechanical properties of laser solid forming IN-738LC alloy
- (2017) Jianjun Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6Al-4V
- (2017) Alexander E. Wilson-Heid et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Fatigue crack growth behaviour in laser melting deposited Ti-6.5Al-3.5Mo-1.5Zr-0.3Si alloy
- (2017) Songsong Lu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and properties of a novel titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si manufactured by laser additive manufacturing
- (2017) Guo-Chao Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
- (2017) Haize Galarraga et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- The influence of Laves phases on the high-cycle fatigue behavior of laser additive manufactured Inconel 718
- (2017) Shang Sui et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Laser Metal Deposition of the Intermetallic TiAl Alloy
- (2017) Marc Thomas et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructures and Grain Refinement of Additive-Manufactured Ti-xW Alloys
- (2017) Michael Y. Mendoza et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation
- (2017) Suihe Jiang et al. NATURE
- Additively manufactured hierarchical stainless steels with high strength and ductility
- (2017) Y. Morris Wang et al. NATURE MATERIALS
- Investigation on the optimized heat treatment procedure for laser fabricated IN718 alloy
- (2017) Yaocheng Zhang et al. OPTICS AND LASER TECHNOLOGY
- Hot Corrosion of Ti–Re Alloys Fabricated by Selective Laser Melting
- (2017) Kamil Majchrowicz et al. OXIDATION OF METALS
- Densification and microstructural investigation of Inconel 718 parts fabricated by selective laser melting
- (2017) Joon-Phil Choi et al. POWDER TECHNOLOGY
- Homogenization kinetics of a nickel-based superalloy produced by powder bed fusion laser sintering
- (2017) Fan Zhang et al. SCRIPTA MATERIALIA
- Effects of build direction and heat treatment on creep properties of Ni-base superalloy built up by additive manufacturing
- (2017) Yen-Ling Kuo et al. SCRIPTA MATERIALIA
- The TRIP Effect and Its Application in Cold Formable Sheet Steels
- (2017) Wolfgang Bleck et al. STEEL RESEARCH INTERNATIONAL
- 3D Laser Shock Peening – A new method for the 3D control of residual stresses in Selective Laser Melting
- (2017) Nikola Kalentics et al. MATERIALS & DESIGN
- Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed- and continuous-wave laser additive manufacturing: A comparative study
- (2017) Simeng Li et al. MATERIALS & DESIGN
- Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel
- (2017) Chaolin Tan et al. MATERIALS & DESIGN
- Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
- (2017) Hui Xiao et al. MATERIALS & DESIGN
- Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
- (2017) V.A. Popovich et al. MATERIALS & DESIGN
- Massive transformation in Ti–6Al–4V additively manufactured by selective electron beam melting
- (2016) S.L. Lu et al. ACTA MATERIALIA
- Additive manufacturing of metals
- (2016) Dirk Herzog et al. ACTA MATERIALIA
- Laser powder deposition of carbon nanotube reinforced nickel-based superalloy Inconel 718
- (2016) Yuan Chen et al. CARBON
- Influence of the build orientation on the fatigue strength of EOS maraging steel produced by additive metal machine
- (2016) D. Croccolo et al. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES
- Low cycle fatigue behavior of direct metal laser sintered Inconel alloy 718
- (2016) Sean Gribbin et al. INTERNATIONAL JOURNAL OF FATIGUE
- Long fatigue crack growth in Inconel 718 produced by selective laser melting
- (2016) R. Konečná et al. INTERNATIONAL JOURNAL OF FATIGUE
- Critical assessment of the fatigue performance of additively manufactured Ti–6Al–4V and perspective for future research
- (2016) P. Li et al. INTERNATIONAL JOURNAL OF FATIGUE
- Microstructure, Fatigue Behavior, and Failure Mechanisms of Direct Laser-Deposited Inconel 718
- (2016) Alex S. Johnson et al. JOM
- Overview of Materials Qualification Needs for Metal Additive Manufacturing
- (2016) Mohsen Seifi et al. JOM
- Effect of tempering temperature on microstructure and mechanical properties of laser solid formed 300M steel
- (2016) Fenggang Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Dendritic microstructure and hot cracking of laser additive manufactured Inconel 718 under improved base cooling
- (2016) Yuan Chen et al. JOURNAL OF ALLOYS AND COMPOUNDS
- High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: A review
- (2016) Jingjie Dai et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Investigations on ultra-high-speed laser material deposition as alternative for hard chrome plating and thermal spraying
- (2016) Thomas Schopphoven et al. JOURNAL OF LASER APPLICATIONS
- Laser adhesion test for thermal sprayed coatings on textured surface by laser
- (2016) D. Courapied et al. JOURNAL OF LASER APPLICATIONS
- Microstructure and mechanical properties of selective laser melted Inconel 718 compared to forging and casting
- (2016) Tanja Trosch et al. MATERIALS LETTERS
- Superior creep strength of a nickel-based superalloy produced by selective laser melting
- (2016) M. Pröbstle et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Developing a phenomenological equation to predict yield strength from composition and microstructure in β processed Ti-6Al-4V
- (2016) I. Ghamarian et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
- (2016) M.E. Aydinöz et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of heat treatment on the microstructure, texture and elastic anisotropy of the nickel-based superalloy CM247LC processed by selective laser melting
- (2016) R. Muñoz-Moreno et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy
- (2016) Qiang Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Defect-dominated fatigue behavior in type 630 stainless steel fabricated by selective laser melting
- (2016) Masayuki Akita et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting
- (2016) Dacian Tomus et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V
- (2016) D. Greitemeier et al. MATERIALS SCIENCE AND TECHNOLOGY
- Additive Manufacturing of Single-Crystal Superalloy CMSX-4 Through Scanning Laser Epitaxy: Computational Modeling, Experimental Process Development, and Process Parameter Optimization
- (2016) Amrita Basak et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effect of heat input on cracking in laser solid formed DZ4125 superalloy
- (2016) Y.L. Hu et al. OPTICS AND LASER TECHNOLOGY
- TC17 titanium alloy laser melting deposition repair process and properties
- (2016) Qi Liu et al. OPTICS AND LASER TECHNOLOGY
- The achievable mechanical properties of SLM produced Maraging Steel 300 components
- (2016) Thorsten Hermann Becker et al. RAPID PROTOTYPING JOURNAL
- Multiprocess 3D printing for increasing component functionality
- (2016) E. MacDonald et al. SCIENCE
- Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing
- (2016) Eric Jägle et al. Materials
- Aging Behaviour and Mechanical Performance of 18-Ni 300 Steel Processed by Selective Laser Melting
- (2016) Riccardo Casati et al. Metals
- Microstructural characteristics and mechanical properties of carbon nanotube reinforced Inconel 625 parts fabricated by selective laser melting
- (2016) Pei Wang et al. MATERIALS & DESIGN
- Improvement of material performance of Inconel 718 formed by high deposition-rate laser metal deposition
- (2016) Chongliang Zhong et al. MATERIALS & DESIGN
- Comparison of the microstructures and mechanical properties of Ti–6Al–4V fabricated by selective laser melting and electron beam melting
- (2016) Xiaoli Zhao et al. MATERIALS & DESIGN
- Role of geometry on properties of additively manufactured Ti-6Al-4V structures fabricated using laser based directed energy deposition
- (2016) Jayme S. Keist et al. MATERIALS & DESIGN
- Investigations on the microstructure and crack formation of IN738LC samples processed by selective laser melting using Gaussian and doughnut profiles
- (2016) Michael Cloots et al. MATERIALS & DESIGN
- A comparative study of Inconel 718 formed by High Deposition Rate Laser Metal Deposition with GA powder and PREP powder
- (2016) Chongliang Zhong et al. MATERIALS & DESIGN
- Investigation of dendritic growth and liquation cracking in laser melting deposited Inconel 718 at different laser input angles
- (2016) Yuan Chen et al. MATERIALS & DESIGN
- Anisotropic tensile behavior of Ti–6Al–4V components fabricated with directed energy deposition additive manufacturing
- (2015) Beth E. Carroll et al. ACTA MATERIALIA
- Topology Optimization in Aircraft and Aerospace Structures Design
- (2015) Ji-Hong Zhu et al. ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING
- Microstructure of γ-titanium aluminide processed by selective laser melting at elevated temperatures
- (2015) Joachim Gussone et al. INTERMETALLICS
- Microstructure and mechanical properties of laser solid formed 300M steel
- (2015) Fenggang Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Fabrication of large Ti–6Al–4V structures by direct laser deposition
- (2015) Chunlei Qiu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Balling phenomena in selective laser melted tungsten
- (2015) Xin Zhou et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructural control during direct laser deposition of a β-titanium alloy
- (2015) Chunlei Qiu et al. MATERIALS & DESIGN
- Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel
- (2015) Tyler LeBrun et al. MATERIALS & DESIGN
- Electron microscopy study of direct laser deposited IN718
- (2015) R.G. Ding et al. MATERIALS CHARACTERIZATION
- Effect of energy input on microstructural evolution of direct laser fabricated IN718 alloy
- (2015) Mingming Ma et al. MATERIALS CHARACTERIZATION
- Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting
- (2015) Martin Joachim Holzweissig et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel
- (2015) G. Casalino et al. OPTICS AND LASER TECHNOLOGY
- Origin of dramatic oxygen solute strengthening effect in titanium
- (2015) Q. Yu et al. SCIENCE
- Effect of microstructure and defects on fatigue behaviour of directed energy deposited Ti–6Al–4V
- (2015) A. W. Prabhu et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- A novel Ti–6Al–4V alloy microstructure with very high strength and good ductility
- (2015) M.T. Jia et al. SCRIPTA MATERIALIA
- Microstructure evolution and layer bands of laser melting deposition Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy
- (2014) Yanyan Zhu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
- (2014) H. Khalid Rafi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting
- (2014) Eric A. Jägle et al. JOURNAL OF MATERIALS RESEARCH
- Microstructure and tensile properties of superalloy IN100 fabricated by micro-laser aided additive manufacturing
- (2014) Guijun Bi et al. MATERIALS & DESIGN
- Research status of laser cladding on titanium and its alloys: A review
- (2014) Fei Weng et al. MATERIALS & DESIGN
- Site specific control of crystallographic grain orientation through electron beam additive manufacturing
- (2014) R. R. Dehoff et al. MATERIALS SCIENCE AND TECHNOLOGY
- Microstructure of TA2/TA15 graded structural material by laser additive manufacturing process
- (2014) Ting-ting QIAN et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Metal Matrix Composites Reinforced by Nano-Particles—A Review
- (2014) Riccardo Casati et al. Metals
- A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser melting
- (2013) H. Khalid Rafi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- High-cycle fatigue crack initiation and propagation in laser melting deposited TC18 titanium alloy
- (2013) Yang Wang et al. International Journal of Minerals Metallurgy and Materials
- Direct laser fabrication of three dimensional components using SC420 stainless steel
- (2013) G.A. Ravi et al. MATERIALS & DESIGN
- Effect of reverted austenite on mechanical properties of precipitation hardenable 17-4 stainlesssteel
- (2013) Rajan Bhambroo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of Cooling Rate on the Microstructure of Laser-Remelted INCONEL 718 Coating
- (2013) Yaocheng Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components
- (2013) Jon Lambarri et al. OPTICS AND LASERS IN ENGINEERING
- Fatigue performance of additive manufactured metallic parts
- (2013) A.B. Spierings et al. RAPID PROTOTYPING JOURNAL
- Effect of ultrarapid cooling on microstructure of laser cladding IN718 coating
- (2013) Y. C. Zhang et al. SURFACE ENGINEERING
- Low cycle fatigue behavior of laser melting deposited TC18 titanium alloy
- (2013) Zhen LI et al. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA
- Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
- (2013) Lawrence E. Murr et al. Journal of Materials Research and Technology-JMR&T
- Effect of Heat Treatment on Niobium Segregation of Laser-Cladded IN718 Alloy Coating
- (2012) Yaocheng Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Texture control during laser deposition of nickel-based superalloy
- (2012) G.P. Dinda et al. SCRIPTA MATERIALIA
- Precipitate modification in PH13-8 Mo type maraging steel
- (2011) H. Leitner et al. ACTA MATERIALIA
- Process parameter selection for selective laser melting of Ti6Al4V based on temperature distribution simulation and experimental sintering
- (2011) Bo Song et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical property study on rapid additive layer manufacture Hastelloy® X alloy by selective laser melting technology
- (2011) Fude Wang INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of the mechanical properties of Inconel 718 components built by laser cladding
- (2011) I. Tabernero et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti–6Al–4V powders
- (2011) M. Naveed Ahsan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
- (2011) T. Vilaro et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718
- (2010) Fencheng Liu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
- (2010) J. Alcisto et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Phase transformation in a nanostructured M300 maraging steel obtained by SPS of mechanically alloyed powders
- (2010) C. Menapace et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Experimental and Numerical Study of the LENS Rapid Fabrication Process
- (2009) Liang Wang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Optimization of the LENS® process for steady molten pool size
- (2007) L. Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationPublish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn More