标题
Recent research and development status of laser cladding: A review
作者
关键词
Laser cladding, Parameter optimization, High-entropy alloys, Material systems, Functional coating, Development tendency
出版物
OPTICS AND LASER TECHNOLOGY
Volume 138, Issue -, Pages 106915
出版商
Elsevier BV
发表日期
2021-01-30
DOI
10.1016/j.optlastec.2021.106915
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Laser direct metal deposition of variable width thin-walled structures in Inconel 718 alloy by coaxial powder feeding
- (2020) Haiquan Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A thermo-mechanical model for simulating the temperature and stress distribution during laser cladding process
- (2019) Zhe Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Modeling of the effect of powder parameters on laser cladding using coaxial nozzle
- (2019) B.A. Khamidullin et al. SURFACE & COATINGS TECHNOLOGY
- Analysis of Melt Pool Characteristics and Process Parameters Using a Coaxial Monitoring System during Directed Energy Deposition in Additive Manufacturing
- (2019) Christian Kledwig et al. Materials
- Laser Cladding of Ti-Based Ceramic Coatings on Ti6Al4V Alloy: Effects of CeO2 Nanoparticles Additive on Wear Performance
- (2019) Haojun Wang et al. Coatings
- Corrosion behavior of Al2CrFeCo CuNiTi high-entropy alloy coating in alkaline solution and salt solution
- (2019) Xing-wu Qiu Results in Physics
- Laser cladding of iron-based erosion resistant metal matrix composites
- (2019) Zhe Zhang et al. Journal of Manufacturing Processes
- Computational and Experimental Investigation of Micro-Hardness and Wear Resistance of Ni-Based Alloy and TiC Composite Coating Obtained by Laser Cladding
- (2019) Guofu Lian et al. Materials
- Effect of annealing temperature on the thermal stability of FeCrNiMnMoxSi0.5B0.5 coatings
- (2019) Ying Zhu et al. SURFACE ENGINEERING
- Tribological behaviour of laser synthesized Ti-Al2O3 coatings on Ti-6Al-4V alloy
- (2019) A. Mthisi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- High temperature wear performance of laser cladding Co06 coating on high-speed train brake disc
- (2019) Yan Liu et al. APPLIED SURFACE SCIENCE
- Influence of laser surface remelting on microstructure and degradation mechanism in simulated body fluid of Zn‒0.5Zr alloy
- (2019) Zheng Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Preparation and high temperature tribological properties of laser in-situ synthesized self-lubricating composite coatings containing metal sulfides on Ti6Al4V alloy
- (2019) Zhong-Yan Zhou et al. APPLIED SURFACE SCIENCE
- Predicting subsurface damage in silicon nitride ceramics subjected to rotary ultrasonic assisted face grinding
- (2019) Mohammad Baraheni et al. CERAMICS INTERNATIONAL
- Microstructure and friction coefficient of ceramic (TiC, TiN and B4C) reinforced Ni-based coating by laser cladding
- (2019) Yu Zhao et al. CERAMICS INTERNATIONAL
- Effect of high-frequency micro-vibration on microstructure and properties of laser cladding aluminum coatings
- (2019) Chonggui Li et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Friction and wear behavior of laser cladded WC-Co and Ni/WC-Co deposits at high temperature
- (2019) Mohammad Erfanmanesh et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Synthesis, microstructure, and hardness of rapidly solidified Cu-Cr alloys
- (2019) A. Garzón-Manjón et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding
- (2019) Xiaofeng Li et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Self-lubricating laser claddings for friction control during press hardening of Al-Si-coated boron steel
- (2019) H. Torres et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Additive manufacturing of high-strength CrMnFeCoNi high-entropy alloys-based composites with WC addition
- (2019) Jinfeng Li et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Manufacturing of Ti3SiC2 lubricated Co-based alloy coatings using laser cladding technology
- (2019) X. Li et al. OPTICS AND LASER TECHNOLOGY
- Reprint of “Effect of substrate bias on biocompatibility of amorphous carbon coatings deposited on Ti6Al4V by PECVD”
- (2019) Yun-Shao Cho et al. SURFACE & COATINGS TECHNOLOGY
- Study on wear and RCF performance of repaired damage railway wheels: Assessing laser cladding to repair local defects on wheels
- (2019) Y. Zhu et al. WEAR
- Considering cyclic plasticity to predict residual stresses in laser cladding of Inconel 718 multi bead samples
- (2019) Mir Siavash Ghorashi et al. Journal of Manufacturing Processes
- Numerical Simulation of Thermal Evolution and Solidification Behavior of Laser Cladding AlSiTiNi Composite Coatings
- (2019) Chonggui Li et al. Coatings
- Microstructure and oxidation behavior of NiCr-chromium carbides coating prepared by powder-fed laser cladding on titanium aluminide substrate
- (2019) S.E. Aghili et al. CERAMICS INTERNATIONAL
- Brittle coating effects on fatigue cracks behavior in Ti alloys
- (2019) Yanyun Bai et al. INTERNATIONAL JOURNAL OF FATIGUE
- Experimental investigation on tool wear characteristics of PVD and CVD coatings during face milling of Ti 6242S and Ti-555 titanium alloys
- (2019) Qinglong An et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Characterization and hardness enhancement of amorphous Fe-based metallic glass laser cladded on nickel-free stainless steel for biomedical implant application
- (2019) Mahmoud Z. Ibrahim et al. MATERIALS CHEMISTRY AND PHYSICS
- Mechanical and biological properties of graded porous tantalum coatings deposited on titanium alloy implants by vacuum plasma spraying
- (2019) Tsung-Yuan Kuo et al. SURFACE & COATINGS TECHNOLOGY
- Microstructural evolution and wear behaviors of laser-clad Stellite 6/NbC/h-BN self-lubricating coatings
- (2019) Zhengfei Chen et al. SURFACE & COATINGS TECHNOLOGY
- Effect of thermal characteristics on distortion in laser cladding of AISI 316L
- (2019) Zhaorui Yan et al. Journal of Manufacturing Processes
- Microstructures and mechanical properties of FeCoCrNi high entropy alloy/WC reinforcing particles composite coatings prepared by laser cladding and plasma cladding
- (2019) Y.B. Peng et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Laser melting deposition of K403 superalloy: The influence of processing parameters on the microstructure and wear performance
- (2019) Heyu Song et al. JOURNAL OF ALLOYS AND COMPOUNDS
- A study on in-situ synthesis of TiCN metal matrix composite coating on Ti–6Al–4V by laser surface alloying process
- (2019) Amal M. Nair et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and fretting wear of laser cladding self-lubricating anti-wear composite coatings on TA2 alloy after aging treatment
- (2019) Jin Ke et al. OPTICS AND LASER TECHNOLOGY
- Effect of rare earth oxide on microstructure and high temperature oxidation properties of laser cladding coatings on 5CrNiMo die steel substrate
- (2019) M. Zhang et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding
- (2019) Hao Liu et al. OPTICS AND LASER TECHNOLOGY
- Investigation of powder fed laser cladding of NiCr-chromium carbides single-tracks on titanium aluminide substrate
- (2019) S.E. Aghili et al. OPTICS AND LASER TECHNOLOGY
- Design of wear and corrosion resistant FeNi-graphite composites by laser cladding
- (2019) H. Raghuram et al. SURFACE & COATINGS TECHNOLOGY
- Effect of LaB6 addition on the microstructure and properties of (Ti3Al + TiB)/Ti composites by laser cladding
- (2019) Yueqiao Feng et al. MATERIALS & DESIGN
- Phase evolution and solidification cracking sensibility in laser remelting treatment of the plasma-sprayed CrMnFeCoNi high entropy alloy coating
- (2019) Caimei Wang et al. MATERIALS & DESIGN
- Enhanced surface layers by laser cladding and ion sulfurization processing towards improved wear-resistance and self-lubrication performances
- (2019) Meiyan Li et al. APPLIED SURFACE SCIENCE
- MoFe1.5CrTiWAlNbx refractory high-entropy alloy coating fabricated by laser cladding
- (2019) Huilin Wang et al. INTERMETALLICS
- Thermal analysis and machinability for laser-assisted machining of fused silica
- (2019) Guoqi Ren et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Study on process optimization of WC-Co50 cermet composite coating by laser cladding
- (2019) Pengfei Fan et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Microstructural control of an Al–W aluminum matrix composite during direct laser metal deposition
- (2019) A. Ramakrishnan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Reduction of the hot cracking sensitivity of CM-247LC superalloy processed by laser cladding using induction preheating
- (2019) G. Bidron et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Epitaxial laser deposition of single crystal Ni-based superalloy: Variation of stray grains
- (2019) Hao Chen et al. MATERIALS CHARACTERIZATION
- Microstructure and tribological behavior of laser cladding TiAlSi composite coatings reinforced by alumina–titania ceramics on Ti–6Al–4V alloys
- (2019) Chonggui Li et al. MATERIALS CHEMISTRY AND PHYSICS
- Process optimization of laser cladding Ni60A alloy coating in remanufacturing
- (2019) Zupeng Wu et al. OPTICS AND LASER TECHNOLOGY
- Effects of laser shock processing and shot peening on 253 MA austenitic stainless steel and their consequences on fatigue properties
- (2019) L. Spadaro et al. OPTICS AND LASER TECHNOLOGY
- Effect of solution treated 316L layer fabricated by laser cladding on wear and corrosive wear resistance
- (2019) Bing He et al. OPTICS AND LASER TECHNOLOGY
- Modeling of thermal behavior and microstructure evolution during laser cladding of AlSi10Mg alloys
- (2019) Chuanming Liu et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and properties of Cu-Ti-Ni composite coatings on gray cast iron fabricated by laser cladding
- (2019) Lingjie Zhu et al. OPTICS AND LASER TECHNOLOGY
- Evaluation of solidification and microstructure in laser cladding Inconel 718 superalloy
- (2019) Saeedeh Jelvani et al. OPTICS AND LASER TECHNOLOGY
- Numerical simulation and experimental study for aerodynamic characteristics and powder transport behavior of novel nozzle
- (2019) Jian Zhang et al. OPTICS AND LASERS IN ENGINEERING
- Optical diagnostics of radiation interaction with the powder stream laterally transported during laser cladding
- (2019) I.P. Gulyaev et al. OPTICS AND LASERS IN ENGINEERING
- Microstructure and property of Ni/WC/La2O3 coatings by ultrasonic vibration-assisted laser cladding treatment
- (2019) Meiyan Li et al. OPTICS AND LASERS IN ENGINEERING
- Surface modification of titanium alloy using hBN powder mixed dielectric through micro-electric discharge machining
- (2019) Deepak Sharma et al. SURFACE & COATINGS TECHNOLOGY
- Influence of Al2O3 mass fractions on microstructure, oxidation resistance and friction–wear behaviors of CoCrAlYTaSi coatings
- (2019) Zhou Weitong et al. SURFACE & COATINGS TECHNOLOGY
- Functional properties of the novel hybrid coatings combined of the oxide and DLC layer as a protective coating for AZ91E magnesium alloy
- (2019) R.M. Molak et al. SURFACE & COATINGS TECHNOLOGY
- High temperature oxidation study of direct laser deposited AlXCoCrFeNi (X=0.3,0.7) high entropy alloys
- (2019) A. Mohanty et al. SURFACE & COATINGS TECHNOLOGY
- Abrasion resistance of Ni-Cr-B-Si coating deposited by laser cladding process
- (2019) Jurandir Marcos Sá de Sousa et al. TRIBOLOGY INTERNATIONAL
- Research on remanufacturing strategy for 45 steel gear using H13 steel powder based on laser cladding technology
- (2019) Lida Zhu et al. Journal of Manufacturing Processes
- Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
- (2019) Xiaoqiang Zhang et al. MATERIALS & DESIGN
- Multi-physics modeling and Gaussian process regression analysis of cladding track geometry for direct energy deposition
- (2019) Shuhao Wang et al. OPTICS AND LASERS IN ENGINEERING
- High temperature wear performance of laser-cladded FeNiCoAlCu high-entropy alloy coating
- (2018) Guo Jin et al. APPLIED SURFACE SCIENCE
- Effects of Fe-to-Co ratio on microstructure and mechanical properties of laser cladded FeCoCrBNiSi high-entropy alloy coatings
- (2018) Fengyuan Shu et al. APPLIED SURFACE SCIENCE
- Kinetics and oxidation behavior of laser clad WC-Co and Ni/WC-Co coatings
- (2018) Mohammad Erfanmanesh et al. CERAMICS INTERNATIONAL
- Effect of ultrasonic power on forming quality of nano-sized Al 2 O 3 -ZrO 2 eutectic ceramic via laser engineered net shaping (LENS)
- (2018) Shuai Yan et al. CERAMICS INTERNATIONAL
- Tailoring corrosion resistance of laser-cladded Ni/WC surface by adding rare earth elements
- (2018) Sayeed Mohammed et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of microstructure, microhardness, and electrochemical properties of laser-deposited Ti-Co coatings on Ti-6Al-4V Alloy
- (2018) O. S. Fatoba et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructure, hardness and corrosion resistance of Al 2 CoCrCuFeNiTi x high-entropy alloy coatings prepared by rapid solidification
- (2018) Xingwu Qiu JOURNAL OF ALLOYS AND COMPOUNDS
- Effect of molybdenum on the high-temperature properties of TiC-TiB 2 reinforced Fe-based composite laser cladding coatings
- (2018) M. Zhang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructure and mechanical properties of carbon fibers strengthened Ni-based coatings by laser cladding: The effect of carbon fiber contents
- (2018) Chuan Shi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Structure and high-temperature property of amorphous composite coating synthesized by laser cladding FeCrCoNiSiB high-entropy alloy powder
- (2018) F.Y. Shu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In-process detection of microstructural changes in laser cladding of in-situ Inconel 718/TiC metal matrix composite coating
- (2018) Gopinath Muvvala et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Variation of crystal orientation during epitaxial growth of dendrites by laser deposition
- (2018) Guowei Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effects of scanning speed on microstructure in laser surface-melted single crystal superalloy and theoretical analysis
- (2018) Guowei Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Effect of substrate preset temperature on crystal growth and microstructure formation in laser powder deposition of single-crystal superalloy
- (2018) Zhaoyang Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Microstructure and high-temperature wear mechanism of laser cladded CoCrBFeNiSi high-entropy alloy amorphous coating
- (2018) F.Y. Shu et al. MATERIALS LETTERS
- Crack-free Fe-based amorphous coating synthesized by laser cladding
- (2018) Yunzhuo Lu et al. MATERIALS LETTERS
- Printability and microstructure of the CoCrFeMnNi high-entropy alloy fabricated by laser powder bed fusion
- (2018) A. Piglione et al. MATERIALS LETTERS
- A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder
- (2018) Keivan A. Nazari et al. MATERIALS LETTERS
- Microstructure and properties of laser clad high-entropy alloy coating on aluminium
- (2018) Yan Shi et al. MATERIALS SCIENCE AND TECHNOLOGY
- Microstructure and wear resistance of laser cladded Ni-Cr-Co-Ti-V high-entropy alloy coating after laser remelting processing
- (2018) Zhaobing Cai et al. OPTICS AND LASER TECHNOLOGY
- Characterization of Al0.5FeCu0.7NiCoCr high-entropy alloy coating on aluminum alloy by laser cladding
- (2018) Cong Ni et al. OPTICS AND LASER TECHNOLOGY
- Effect of laser remelting on microstructure and properties of WC reinforced Fe-based amorphous composite coatings by laser cladding
- (2018) Shengfeng Zhou et al. OPTICS AND LASER TECHNOLOGY
- Microstructure and wear resistance of laser cladded composite coatings prepared from pre-alloyed WC-NiCrMo powder with different laser spots
- (2018) Jianhua Yao et al. OPTICS AND LASER TECHNOLOGY
- Effect of electric-magnetic compound field on the pore distribution in laser cladding process
- (2018) Nan Zhang et al. OPTICS AND LASER TECHNOLOGY
- Experimental research and multi-response multi-parameter optimization of laser cladding Fe313
- (2018) Tianbiao Yu et al. OPTICS AND LASER TECHNOLOGY
- Optical diagnostics and optimization of the gas-powder flow in the nozzles for laser cladding
- (2018) K.Yu. Nagulin et al. OPTICS AND LASER TECHNOLOGY
- Effect of ultrasonic peening on Microstructure and properties of laser rapid forming GH4169
- (2018) Shuang Liu et al. OPTIK
- Parametric study and characterization of AlN-Ni-Ti6Al4V composite cladding on titanium alloy
- (2018) Shakti Kumar et al. SURFACE & COATINGS TECHNOLOGY
- Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution
- (2018) L. Reddy et al. SURFACE & COATINGS TECHNOLOGY
- Corrosion behavior of laser-clad Cu-9Ni-6Sn coating
- (2018) Qianlin Wu et al. SURFACE & COATINGS TECHNOLOGY
- Influence of macrosegregation on solidification cracking in laser clad ultra-high strength steels
- (2018) Cameron Barr et al. SURFACE & COATINGS TECHNOLOGY
- Microstructural design of self-lubricating laser claddings for use in high temperature sliding applications
- (2018) H. Torres et al. SURFACE & COATINGS TECHNOLOGY
- Mechanical and microstructural characterization of MCrAlY coatings produced by laser cladding: The influence of the Ni, Co and Al content
- (2018) J.C. Pereira et al. SURFACE & COATINGS TECHNOLOGY
- Enhanced corrosion and wear resistance properties of carbon fiber reinforced Ni-based composite coating by laser cladding
- (2018) Jianbo Lei et al. SURFACE & COATINGS TECHNOLOGY
- Cladding of Tribaloy T400 on steel substrates using a high power Nd:YAG laser
- (2018) Wei Ya et al. SURFACE & COATINGS TECHNOLOGY
- Compositional effect of Zr-containing ceramic on phase and microstructural evolution of Ti–SiC laser clad coatings
- (2018) Gabriel A Farotade et al. SURFACE ENGINEERING
- Tribological behaviour of MoS 2 -based self-lubricating laser cladding for use in high temperature applications
- (2018) H. Torres et al. TRIBOLOGY INTERNATIONAL
- Corrosion resistance improvement of 45 steel by Fe-based amorphous coating
- (2018) Guokun Huang et al. VACUUM
- Self-lubricating laser claddings for reducing friction and wear from room temperature to 600 °C
- (2018) H. Torres et al. WEAR
- Influence of dilution rate on the microstructure and properties of FeCrCoNi high-entropy alloy coating
- (2018) Yangchuan Cai et al. MATERIALS & DESIGN
- Modified criterions for phase prediction in the multi-component laser-clad coatings and investigations into microstructural evolution/wear resistance of FeCrCoNiAlMox laser-clad coatings
- (2018) Y.F. Juan et al. APPLIED SURFACE SCIENCE
- Microhardness and wear resistance of Al2O3-TiB2-TiC ceramic coatings on carbon steel fabricated by laser cladding
- (2018) Zhaoliang Li et al. CERAMICS INTERNATIONAL
- Microstructure and wear resistance of in-situ synthesized Ti(C, N) ceramic reinforced Fe-based coating by laser cladding
- (2018) Lin Yang et al. CERAMICS INTERNATIONAL
- Laser deposition of compositionally graded titanium oxide on Ti6Al4V alloy
- (2018) Mingyuan Lu et al. CERAMICS INTERNATIONAL
- Investigation of microstructure and properties of low-carbon steel during ultrasonic-assisted laser welding and cladding
- (2018) A. I. Gorunov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mathematical Modeling of Transport Phenomena in Multi-track and Multi-layer Laser Powder Deposition of Single-Crystal Superalloy
- (2018) Zhaoyang Liu et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Microstructure and properties of Cu/TiB2 wear resistance composite coating on H13 steel prepared by in-situ laser cladding
- (2018) Van Nghia Tran et al. OPTICS AND LASER TECHNOLOGY
- Formation and properties of a Zr-based amorphous coating by laser cladding
- (2018) Ning Zhang et al. RARE METALS
- Microstructure and Wear Resistance of Fe-Cr-Mo-Co-C-B Amorphous Composite Coatings Synthesized by Laser Cladding
- (2018) Xiangchun Hou et al. Metals
- Microstructure and properties of in-situ synthesized (Ti3Al + TiB)/Ti composites by laser cladding
- (2018) Yueqiao Feng et al. MATERIALS & DESIGN
- Finite Element Simulation of Temperature and Stress Field for Laser Cladded Nickel-Based Amorphous Composite Coatings
- (2018) Ruifeng Li et al. Coatings
- Fabrication of AlCoCrFeNi High-Entropy Alloy Coating on an AISI 304 Substrate via a CoFe2Ni Intermediate Layer
- (2018) Wenyuan Cui et al. Entropy
- Microstructure and corrosion behaviour of laser-cladding Al-Ni-TiC-CeO2 composite coatings on S355 offshore steel
- (2018) X. He et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Solidification behavior and morphological evolution in laser surface forming of AlCoCrCuFeNi multi-layer high-entropy alloy coatings on AZ91D
- (2018) G.H. Meng et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructures and mechanical properties of CrMnFeCoNi high entropy alloys fabricated using laser metal deposition technique
- (2018) Shuo Xiang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Influences of depositing materials, processing parameters and heating conditions on material characteristics of laser-cladded hypereutectoid rails
- (2018) Quan Lai et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Investigation of vibration effects and tool shape on edge chipping phenomenon occurring during rotary ultrasonic drilling
- (2018) Milan Nad' et al. JOURNAL OF SOUND AND VIBRATION
- Effects of process parameters on microstructures and tensile properties of laser melting deposited CrMnFeCoNi high entropy alloys
- (2018) Shuo Xiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of laser parameters on graphite morphology in the bonding zone and process optimization in gray cast iron laser cladding
- (2018) Peng Yi et al. OPTICS AND LASER TECHNOLOGY
- Influence of process parameters and initial microstructure on the oxidation resistance of Ti48Al2Cr2Nb coating obtained by laser metal deposition
- (2018) Jenny Cecilia Zambrano Carrullo et al. SURFACE & COATINGS TECHNOLOGY
- On the formation features, structure, microhardness and tribological behavior of single tracks and coating layers formed by laser cladding of Al-Fe powder bronze
- (2018) O.G. Devojno et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure, microhardness and corrosion resistance of NiCrBSi coatings under electromagnetic field auxiliary laser cladding
- (2018) L.L. Zhai et al. SURFACE & COATINGS TECHNOLOGY
- Synthesis and characterization of nickel free titanium–hydroxyapatite composite coating over Nitinol surface through in-situ laser cladding and alloying
- (2018) Rajib Chakraborty et al. SURFACE & COATINGS TECHNOLOGY
- Effects of the content of MoS2 on microstructural evolution and wear behaviors of the laser-clad coatings
- (2018) C.C. Qu et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure and properties of the laser cladding ODS layers on CLAM steel
- (2018) Xianfen Li et al. SURFACE & COATINGS TECHNOLOGY
- Analysis and Respond Surface Methodology Modeling on Property and Performance of Two-Dimensional Gradient Material Laser Cladding on Die-cutting Tool
- (2018) Guofu Lian et al. Materials
- Causes analysis on cracks in nickel-based single crystal superalloy fabricated by laser powder deposition additive manufacturing
- (2018) Zhipeng Zhou et al. MATERIALS & DESIGN
- Thermal stability and oxidation resistance of FeCrxCoNiB high-entropy alloys coatings by laser cladding
- (2018) Fa Chang et al. SURFACE & COATINGS TECHNOLOGY
- Effect of pre-treatment with fine particle peening on surface properties and wear resistance of gas blow induction heating nitrided titanium alloy
- (2018) Shogo Takesue et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure and tribological properties of laser cladded self-lubricating nickel-base composite coatings containing nano-Cu and h-BN solid lubricants
- (2018) Yue Zhao et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure, formation mechanism and property characterization of Ti + SiC laser cladded coatings on Ti6Al4V alloy
- (2018) Neng Li et al. MATERIALS CHARACTERIZATION
- Epitaxial growth and oxidation behavior of an overlay coating on a Ni-base single-crystal superalloy by laser cladding
- (2018) Jingjing Liang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Evolution in microstructure and corrosion behavior of AlCoCrxFeNi high-entropy alloy coatings fabricated by laser cladding
- (2018) Y.Q. Jiang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- The influence of carbides on the microstructure, grain growth, and oxidation resistance of nanostructured carbides-strengthened cobalt-based multi-track laser-cladding layers
- (2018) Yuzhen Zhang et al. APPLIED SURFACE SCIENCE
- Laser cladding Ti-Ni/TiN/TiW+TiS/WS2 self-lubricating wear resistant composite coating on Ti-6Al-4V alloy
- (2018) Qiushi Gao et al. OPTICS AND LASER TECHNOLOGY
- An adaptive laser cladding methodology for blade tip repair
- (2017) X. Penaranda et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Thermo-mechanical analysis in pulsed laser cladding of WC powder on Inconel 718
- (2017) Y. Javid et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The study on minimum uncut chip thickness and cutting forces during laser-assisted turning of WC/NiCr clad layers
- (2017) D. Przestacki et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Wear resistance in the soil of Stellite-6/WC coatings produced using laser cladding method
- (2017) Dariusz Bartkowski et al. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
- Microscale effect of high-temperature exposition on laser cladded Inconel 625-Cr 3 C 2 metal matrix composite
- (2017) D. Verdi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Empirical alloys-by-design theory calculations to the microstructure evolution mechanical properties of Mo-doped laser cladding NiAl composite coatings on medium carbon steel substrates
- (2017) Chun-Ming Lin et al. JOURNAL OF ALLOYS AND COMPOUNDS
- In situ TEM tensile testing on high-entropy alloy coating by laser surface alloying
- (2017) Zhaobing Cai et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Laser cladding Al-based amorphous-nanocrystalline composite coatings on AZ80 magnesium alloy under water cooling condition
- (2017) Chaolin Tan et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Microstructures and corrosion resistance of Fe-based amorphous/nanocrystalline coating fabricated by laser cladding
- (2017) S.L. Wang et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Monitoring and assessment of tungsten carbide wettability in laser cladded metal matrix composite coating using an IR pyrometer
- (2017) Gopinath Muvvala et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Turbine blade tip single crystalline clad deposition with applied remelting passes for well oriented volume extension
- (2017) B. Rottwinkel et al. JOURNAL OF LASER APPLICATIONS
- An Experimental and Simulation Study for Powder Injection Multitrack Laser Cladding of P420 Stainless Steel on AISI 1018 Steel for Selected Mechanical Properties
- (2017) Navid Nazemi et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Improving the Thermal Shock Resistance of Thermal Barrier Coatings Through Formation of an In Situ YSZ/Al2O3 Composite via Laser Cladding
- (2017) Zohre Soleimanipour et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Laser processing of bulk metallic glass: A review
- (2017) E. Williams et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Numerical investigation of gas-disperse jet flows created by coaxial nozzles during the laser direct material deposition
- (2017) O.B. Kovalev et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Prediction of Dendrite Orientation and Stray Grain Distribution in Laser Surface-melted Single Crystal Superalloy
- (2017) Guowei Wang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Composition optimization of low modulus and high-strength TiNb-based alloys for biomedical applications
- (2017) I.V. Okulov et al. Journal of the Mechanical Behavior of Biomedical Materials
- TEM observation on phase separation and interfaces of laser surface alloyed high-entropy alloy coating
- (2017) Zhaobing Cai et al. MICRON
- Impact analysis of the thermal mechanical coupling characteristics of graphite morphologies during laser cladding of gray cast iron
- (2017) Peng Yi et al. OPTICS AND LASER TECHNOLOGY
- Online monitoring of thermo-cycles and its correlation with microstructure in laser cladding of nickel based super alloy
- (2017) Gopinath Muvvala et al. OPTICS AND LASERS IN ENGINEERING
- Research and development status of laser cladding on magnesium alloys: A review
- (2017) Jianli Liu et al. OPTICS AND LASERS IN ENGINEERING
- Influence of large particle size – up to 1.2mm – and morphology on wear resistance in NiCrBSi/WC laser cladded composite coatings
- (2017) D. Deschuyteneer et al. SURFACE & COATINGS TECHNOLOGY
- TiC particle reinforced Ti-6Al-4V friction surfacing coatings
- (2017) C. Belei et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Cr on the microstructure and properties of TiC-TiB 2 particles reinforced Fe-based composite coatings
- (2017) M. Zhang et al. SURFACE & COATINGS TECHNOLOGY
- Laser cladding of phosphor bronze
- (2017) F. Arias-González et al. SURFACE & COATINGS TECHNOLOGY
- Stellite alloy mixture hardfacing via laser cladding for control valve seat sealing surfaces
- (2017) Yinping Ding et al. SURFACE & COATINGS TECHNOLOGY
- Laser cladding Ni-based alloy/nano-Ni encapsulated h-BN self-lubricating composite coatings
- (2017) Hua Yan et al. SURFACE & COATINGS TECHNOLOGY
- Synthesis and characterization of refractory TiZrNbWMo high-entropy alloy coating by laser cladding
- (2017) Mina Zhang et al. SURFACE & COATINGS TECHNOLOGY
- Microstructure and wear resistance of Co-based/Cr3C2 coatings with CeO2
- (2017) Yao Chen et al. SURFACE ENGINEERING
- 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations
- (2017) H.-S. Tran et al. MATERIALS & DESIGN
- Online assessment of TiC decomposition in laser cladding of metal matrix composite coating
- (2017) Gopinath Muvvala et al. MATERIALS & DESIGN
- Bioactivity of fluorapatite/alumina composite coatings deposited on Ti6Al4V substrates by laser cladding
- (2016) C. S. Chien et al. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
- Simulation of transport phenomena and melt pool shape for multiple layer additive manufacturing
- (2016) Yousub Lee et al. JOURNAL OF LASER APPLICATIONS
- Control of crystal orientation and continuous growth through inclination of coaxial nozzle in laser powder deposition of single-crystal superalloy
- (2016) Zhaoyang Liu et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- 2D modelling of clad geometry and resulting thermal cycles during laser cladding
- (2016) Wei Ya et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Microstructure and Mechanical Properties of Al2O3/ZrO2 Directionally Solidified Eutectic Ceramic Prepared by Laser 3D Printing
- (2016) Zhi Liu et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Study on deposition rate and laser energy efficiency of Laser-Induction Hybrid Cladding
- (2016) DengZhi Wang et al. OPTICS AND LASER TECHNOLOGY
- Laser cladding strategies for producing WC reinforced NiCr coatings inside twin barrels
- (2016) Josu Leunda et al. SURFACE & COATINGS TECHNOLOGY
- Numerical study on the effect of pressure and nozzle dimension on particle distribution and velocity in laser cladding under vacuum base on CFD
- (2016) Baicheng Zhang et al. Journal of Manufacturing Processes
- Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders
- (2016) Lijun Song et al. Journal of Manufacturing Processes
- Laser cladding of 420 stainless steel with molybdenum on mild steel A36 by a high power direct diode laser
- (2016) Zhe Zhang et al. MATERIALS & DESIGN
- High strength beta titanium alloys: New design approach
- (2015) I.V. Okulov et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure, microhardness and corrosion resistance of Stellite-6 coatings reinforced with WC particles using laser cladding
- (2015) Dariusz Bartkowski et al. OPTICS AND LASER TECHNOLOGY
- Parameter optimization of laser cladding process and resulting microstructure for the repair of tenon on steam turbine blade
- (2015) Chun-Ming Lin VACUUM
- Effect of high dilution on the in situ synthesis of Ni–Zr/Zr–Si(B, C) reinforced composite coating on zirconium alloy substrate by laser cladding
- (2015) Kun Liu et al. MATERIALS & DESIGN
- Improving the hot corrosion resistance of plasma sprayed ceria–yttria stabilized zirconia thermal barrier coatings by laser surface treatment
- (2014) Raheleh Ahmadi-Pidani et al. MATERIALS & DESIGN
- Laser surface melting of a complex high alloy steel
- (2013) Patrick W. Leech MATERIALS & DESIGN
- Effects of pulse duration and overlapping factor on melting ratio in preplaced pulsed Nd:YAG laser cladding
- (2012) Amirreza Farnia et al. OPTICS AND LASERS IN ENGINEERING
- Comprehensive analysis of laser cladding by means of optical diagnostics and numerical simulation
- (2012) I. Smurov et al. SURFACE & COATINGS TECHNOLOGY
- Modeling of transport phenomena during the coaxial laser direct deposition process
- (2010) Shaoyi Wen et al. JOURNAL OF APPLIED PHYSICS
- FEM modeling and experimental verification for dilution control in laser cladding
- (2010) J.T. Hofman et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Titanium alloy production technology, market prospects and industry development
- (2010) Chunxiang Cui et al. MATERIALS & DESIGN
- Improvement of the oxidation and wear resistance of pure Ti by laser cladding at elevated temperature
- (2010) Chun Guo et al. SURFACE & COATINGS TECHNOLOGY
- Effects of processing parameters on structure of Ni-based WC composite coatings during laser induction hybrid rapid cladding
- (2009) Shengfeng Zhou et al. APPLIED SURFACE SCIENCE
- Evaluation of surface-modified Ti–6Al–4V alloy by combination of plasma-carburizing and deep-rolling
- (2008) N. Tsuji et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Concentration model based on movement model of powder flow in coaxial laser cladding
- (2008) Nan Yang OPTICS AND LASER TECHNOLOGY
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started