Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
出版年份 2015 全文链接
标题
Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
作者
关键词
-
出版物
Materials
Volume 8, Issue 4, Pages 1871-1896
出版商
MDPI AG
发表日期
2015-04-22
DOI
10.3390/ma8041871
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
- (2015) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Influence of cell shape on mechanical properties of Ti–6Al–4V meshes fabricated by electron beam melting method
- (2014) S.J. Li et al. Acta Biomaterialia
- Numerical optimization of open-porous bone scaffold structures to match the elastic properties of human cortical bone
- (2014) Jan Wieding et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effects of bio-functionalizing surface treatments on the mechanical behavior of open porous titanium biomaterials
- (2014) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells
- (2014) S.M. Ahmadi et al. Journal of the Mechanical Behavior of Biomedical Materials
- A numerical investigation into the influence of the properties of cobalt chrome cellular structures on the load transfer to the periprosthetic femur following total hip arthroplasty
- (2014) Kevin Brian Hazlehurst et al. MEDICAL ENGINEERING & PHYSICS
- Optimization of scaffold design for bone tissue engineering: A computational and experimental study
- (2014) Marta R. Dias et al. MEDICAL ENGINEERING & PHYSICS
- Crystal structure and nanotopographical features on the surface of heat-treated and anodized porous titanium biomaterials produced using selective laser melting
- (2013) S. Amin Yavari et al. APPLIED SURFACE SCIENCE
- Open forward and inverse problems in theoretical modeling of bone tissue adaptation
- (2013) Amir Abbas Zadpoor Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
- (2013) G. Campoli et al. MATERIALS & DESIGN
- Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
- (2013) H. Attar et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Enhanced Bone Regeneration of Cortical Segmental Bone Defects Using Porous Titanium Scaffolds Incorporated with Colloidal Gelatin Gels for Time- and Dose-Controlled Delivery of Dual Growth Factors
- (2013) Johan van der Stok et al. TISSUE ENGINEERING PART A
- Surface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing
- (2012) Grzegorz Pyka et al. ADVANCED ENGINEERING MATERIALS
- Biomedical production of implants by additive electro-chemical and physical processes
- (2012) Paulo Bartolo et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Laser additive manufacturing of metallic components: materials, processes and mechanisms
- (2012) D D Gu et al. INTERNATIONAL MATERIALS REVIEWS
- Permeability analysis of scaffolds for bone tissue engineering
- (2012) M.R. Dias et al. JOURNAL OF BIOMECHANICS
- Processing and characterization of porous titanium for implants by using NaCl as space holder
- (2012) Y. Torres et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Selective laser melting-produced porous titanium scaffolds regenerate bone in critical size cortical bone defects
- (2012) Johan Van der Stok et al. JOURNAL OF ORTHOPAEDIC RESEARCH
- Patient-specific finite element modeling of bones
- (2012) Sander Poelert et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE
- The Effect of Structural Design on Mechanical Properties and Cellular Response of Additive Manufactured Titanium Scaffolds
- (2012) Jan Wieding et al. Materials
- Preparation and properties of biomedical porous titanium alloys by gelcasting
- (2011) Donghua Yang et al. Biomedical Materials
- Shear strength and toughness of trabecular bone are more sensitive to density than damage
- (2011) Jacqueline G. Garrison et al. JOURNAL OF BIOMECHANICS
- Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
- (2011) S. Van Bael et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Structural and material approaches to bone tissue engineering in powder-based three-dimensional printing
- (2010) A. Butscher et al. Acta Biomaterialia
- BoneJ: Free and extensible bone image analysis in ImageJ
- (2010) Michael Doube et al. BONE
- Selective laser melting of aluminium components
- (2010) Eleftherios Louvis et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Elastoplastic deformation of dissimilar-alloy adhesively-bonded tailor-made blanks
- (2010) Amir Abbas Zadpoor et al. MATERIALS & DESIGN
- Digital Image Correlation
- (2010) Nick McCormick et al. Materials Today
- Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays
- (2010) L. E. Murr et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Influence of calcium ion deposition on apatite-inducing ability of porous titanium for biomedical applications
- (2009) Xiao-Bo Chen et al. Acta Biomaterialia
- Scaffold Design and Manufacturing: From Concept to Clinic
- (2009) Scott J. Hollister ADVANCED MATERIALS
- In vivoperformance of selective electron beam-melted Ti-6Al-4V structures
- (2009) Sabine Ponader et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Selective laser melting: A unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. II. Randomized structures
- (2009) Lewis Mullen et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Mechanical evaluation of porous titanium (Ti6Al4V) structures with electron beam melting (EBM)
- (2009) Jayanthi Parthasarathy et al. Journal of the Mechanical Behavior of Biomedical Materials
- Biofabrication: a 21st century manufacturing paradigm
- (2009) V Mironov et al. Biofabrication
- Cellular Ti–6Al–4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
- (2008) Peter Heinl et al. Acta Biomaterialia
- Rapid prototyped porous titanium coated with calcium phosphate as a scaffold for bone tissue engineering
- (2008) Marco A. Lopez-Heredia et al. BIOMATERIALS
- Selective Laser Melting: A regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications
- (2008) Lewis Mullen et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- Fabrication and characterization of porous Ti6Al4V parts for biomedical applications using electron beam melting process
- (2008) Xiang Li et al. MATERIALS LETTERS
- Full-field strain measurements in textile deformability studies
- (2007) S.V. Lomov et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Experimental and numerical study of machined aluminum tailor-made blanks
- (2007) Amir Abbas Zadpoor et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search