标题
Tribological challenges and advancements in wind turbine bearings: A review
作者
关键词
Wind turbine, Rolling element bearings, Failure modes, Fluid film bearing
出版物
ENGINEERING FAILURE ANALYSIS
Volume 118, Issue -, Pages 104885
出版商
Elsevier BV
发表日期
2020-09-08
DOI
10.1016/j.engfailanal.2020.104885
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- An experimental characterization of the friction coefficient of a wind turbine gearbox lubricant
- (2019) Charles Nutakor et al. WIND ENERGY
- Reliability prediction of an offshore wind turbine gearbox
- (2019) U. Bhardwaj et al. RENEWABLE ENERGY
- Comparative Analysis of Bearing Current in Wind Turbine Generators
- (2018) Ruifang Liu et al. Energies
- Performance comparison of hole-entry and slot entry hybrid journal bearings considering combined influence of thermal effects and micropolar lubricant
- (2018) Pankaj Khatak et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Fatigue life analysis of slewing bearings in wind turbines
- (2018) Peiyu He et al. INTERNATIONAL JOURNAL OF FATIGUE
- Pitch bearing/raceway fretting: Influence of contact angle
- (2018) Peiyu He et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE
- Replication of white etching area evolution using novel modified dynamic load pin-on-disc tribometer on bearing steel
- (2018) K. Sreeraj et al. TRIBOLOGY INTERNATIONAL
- Lubricant Effects on White Etching Cracking Failures in Thrust Bearing Rig Tests
- (2018) Tabassumul Haque et al. TRIBOLOGY TRANSACTIONS
- The Cause of Premature Wind Turbine Bearing Failures: Overloading or Underloading?
- (2018) Nikolay T. Garabedian et al. TRIBOLOGY TRANSACTIONS
- Initiation of sub-surface micro-cracks and white etching areas from debonding at non-metallic inclusions in wind turbine gearbox bearing
- (2018) H.A. Al-Tameemi et al. WEAR
- Damage evolution and contact surfaces analysis of high-loaded oscillating hybrid bearings
- (2018) Ilaria Ghezzi et al. WEAR
- Effect of lubricants on bearing damage in rolling-sliding conditions: Evolution of white etching cracks
- (2018) Mohanchand Paladugu et al. WEAR
- Fault Prognosis and Remaining Useful Life Prediction of Wind Turbine Gearboxes Using Current Signal Analysis
- (2018) Fangzhou Cheng et al. IEEE Transactions on Sustainable Energy
- The Effect of Lubricant Composition on White Etching Crack Failures
- (2018) Benjamin Gould et al. TRIBOLOGY LETTERS
- The origins of white etching cracks and their significance to rolling bearing failures
- (2018) Francesco Manieri et al. INTERNATIONAL JOURNAL OF FATIGUE
- Failure analysis on abnormal wear of roller bearings in gearbox for wind turbine
- (2017) Yi Gong et al. ENGINEERING FAILURE ANALYSIS
- Microstructural changes in White Etching Cracks (WECs) and their relationship with those in Dark Etching Region (DER) and White Etching Bands (WEBs) due to Rolling Contact Fatigue (RCF)
- (2017) Viktorija Šmeļova et al. INTERNATIONAL JOURNAL OF FATIGUE
- Evolution of white-etching cracks and associated microstructural alterations during bearing tests
- (2017) S. W. Ooi et al. MATERIALS SCIENCE AND TECHNOLOGY
- Non-Dispersive Infrared Sensor for Online Condition Monitoring of Gearbox Oil
- (2017) Markus Rauscher et al. SENSORS
- Tribochemical study of micropitting in tribocorrosive lubricated contacts: The influence of water and relative humidity
- (2017) Siavash Soltanahmadi et al. TRIBOLOGY INTERNATIONAL
- Reproduction of white etching cracks under rolling contact loading on thrust bearing and two-disc test rigs
- (2017) F. Gutiérrez Guzmán et al. WEAR
- Investigation of high-speed shaft bearing loads in wind turbine gearboxes through dynamometer testing
- (2017) Y. Guo et al. WIND ENERGY
- An analysis of premature cracking associated with microstructural alterations in an AISI 52100 failed wind turbine bearing using X-ray tomography
- (2017) Benjamin Gould et al. MATERIALS & DESIGN
- Fault Index Statistical Study for Gear Fault Detection Using Stator Current Space Vector Analysis
- (2016) Shahin Hedayati Kia et al. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS
- Dynamic life prediction of pitch and yaw bearings for wind turbine
- (2016) Ju Seok Nam et al. Journal of Mechanical Science and Technology
- Performance Analysis of Capillary Compensated Hybrid Journal Bearing by Considering Combined Influence of Thermal Effects and Micropolar Lubricant
- (2016) Pankaj Khatak et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Electron microscopy analysis of structural changes within white etching areas
- (2016) A. M. Diederichs et al. MATERIALS SCIENCE AND TECHNOLOGY
- Bearing performance as a function of structure and heat treatment
- (2016) T. Blass et al. MATERIALS SCIENCE AND TECHNOLOGY
- Study of subsurface initiation mechanism for white etching crack formation
- (2016) Annika M. Diederichs et al. MATERIALS SCIENCE AND TECHNOLOGY
- An updated review: white etching cracks (WECs) and axial cracks in wind turbine gearbox bearings
- (2016) M.-H. Evans MATERIALS SCIENCE AND TECHNOLOGY
- A review of wind turbine bearing condition monitoring: State of the art and challenges
- (2016) Henrique Dias Machado de Azevedo et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Key challenges and prospects for large wind turbines
- (2016) R. McKenna et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Experimental damage analysis in high loaded oscillating bearings
- (2016) E. Houara Komba et al. TRIBOLOGY INTERNATIONAL
- Fatigue resistant carbon coatings for rolling/sliding contacts
- (2016) Harpal Singh et al. TRIBOLOGY INTERNATIONAL
- Investigating the Process of White Etching Crack Initiation in Bearing Steel
- (2016) Benjamin Gould et al. TRIBOLOGY LETTERS
- Influence of Currents from Electrostatic Charges on WEC Formation in Rolling Bearings
- (2016) Joerg Loos et al. TRIBOLOGY TRANSACTIONS
- An experimental and analytical study of the effect of water and its tribochemistry on the tribocorrosive wear of boundary lubricated systems with ZDDP-containing oil
- (2016) Pourya Parsaeian et al. WEAR
- Influence of a WC/a-C:H tribological coating on micropitting wear of bearing steel
- (2016) B. Mahmoudi et al. WEAR
- Ultimate design load analysis of planetary gearbox bearings under extreme events
- (2016) Juan Gallego-Calderon et al. WIND ENERGY
- An Electro-Thermal Analysis of a Variable-Speed Doubly-Fed Induction Generator in a Wind Turbine
- (2015) Yingning Qiu et al. Energies
- Observations of the effect of varying Hoop stress on fatigue failure and the formation of white etching areas in hydrogen infused 100Cr6 steel rings
- (2015) Shravan Janakiraman et al. INTERNATIONAL JOURNAL OF FATIGUE
- An experimental study on the performance and fatigue life of pitch bearing for wind turbine
- (2015) Jeong Woo Han et al. Journal of Mechanical Science and Technology
- Critical Assessment 13: Elimination of white etching matter in bearing steels
- (2015) H. K. D. H. Bhadeshia et al. MATERIALS SCIENCE AND TECHNOLOGY
- Thermohydrostatic analysis of hybrid journal bearing compensated by constant flow valve operating with micropolar lubricant
- (2015) Pankaj Khatak et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Torque loss and wear of FZG gears lubricated with wind turbine gear oils using an ionic liquid as additive
- (2015) Carlos M.C.G. Fernandes et al. TRIBOLOGY INTERNATIONAL
- The Influence of Sliding and Contact Severity on the Generation of White Etching Cracks
- (2015) Benjamin Gould et al. TRIBOLOGY LETTERS
- Effects of Black Oxide and a WC/a-C:H Coating on the Micropitting of SAE 52100 Bearing Steel
- (2015) Behzad Mahmoudi et al. TRIBOLOGY LETTERS
- Ionic liquids as an additive in fully formulated wind turbine gearbox oils
- (2015) R. Monge et al. WEAR
- Evaluation of bearing, gears and gearboxes performance with different wind turbine gear oils
- (2015) Ramiro Carneiro Martins et al. Friction
- Wind Turbine Condition Monitoring: State-of-the-Art Review, New Trends, and Future Challenges
- (2014) Pierre Tchakoua et al. Energies
- Wind-Turbine Gear-Box Roller-Bearing Premature-Failure Caused by Grain-Boundary Hydrogen Embrittlement: A Multi-physics Computational Investigation
- (2014) M. Grujicic et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- A novel methodology for online detection of bearing health status for naturally progressing defect
- (2014) Piyush Shakya et al. JOURNAL OF SOUND AND VIBRATION
- Long-term contact fatigue analysis of a planetary bearing in a land-based wind turbine drivetrain
- (2014) Z. Jiang et al. WIND ENERGY
- Online particle-contaminated lubrication oil condition monitoring and remaining useful life prediction for wind turbines
- (2014) Junda Zhu et al. WIND ENERGY
- Effect of preventive maintenance intervals on reliability and maintenance costs of wind turbine gearboxes
- (2014) Joel Igba et al. WIND ENERGY
- Integrated modulation intensity distribution as a practical tool for condition monitoring
- (2013) Jacek Urbanek et al. APPLIED ACOUSTICS
- Prediction, operations, and condition monitoring in wind energy
- (2013) Andrew Kusiak et al. ENERGY
- Thermohydrostatic rheological study of orifice compensated asymmetric hole-entry hybrid journal bearings
- (2013) H.C. Garg et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Torque loss in a gearbox lubricated with wind turbine gear oils
- (2013) David E. P. Gonçalves et al. Lubrication Science
- A FIB/TEM study of butterfly crack formation and white etching area (WEA) microstructural changes under rolling contact fatigue in 100Cr6 bearing steel
- (2013) M.-H. Evans et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Wind turbine reliability analysis
- (2013) Jesús María Pinar Pérez et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- White etching crack (WEC) investigation by serial sectioning, focused ion beam and 3-D crack modelling
- (2013) M.-H. Evans et al. TRIBOLOGY INTERNATIONAL
- Torque loss in cylindrical roller thrust bearings lubricated with wind turbine gear oils at constant temperature
- (2013) Carlos M.C.G. Fernandes et al. TRIBOLOGY INTERNATIONAL
- Torque loss in thrust ball bearings lubricated with wind turbine gear oils at constant temperature
- (2013) Carlos M.C.G. Fernandes et al. TRIBOLOGY INTERNATIONAL
- Attaining High Levels of Bearing Performance with a Nanocomposite Diamond-Like Carbon Coating
- (2013) M. Eckels et al. TRIBOLOGY TRANSACTIONS
- Prevention of Smearing Damage in Cylindrical Roller Bearings
- (2013) Ryan D. Evans et al. TRIBOLOGY TRANSACTIONS
- Investigations of Bearing Failures Associated with White Etching Areas (WEAs) in Wind Turbine Gearboxes
- (2013) Robert Errichello et al. TRIBOLOGY TRANSACTIONS
- Material wear and fatigue in wind turbine Systems
- (2013) A. Greco et al. WEAR
- Wind turbine condition monitoring based on SCADA data using normal behavior models. Part 1: System description
- (2012) Meik Schlechtingen et al. APPLIED SOFT COMPUTING
- Wind Turbine Tower Vibration Modeling and Monitoring by the Nonlinear State Estimation Technique (NSET)
- (2012) Peng Guo et al. Energies
- Pressure viscosity coefficients and traction properties of synthetic lubricants for wind turbine gear systems
- (2012) Martin Greaves Lubrication Science
- Effect of sulphide inclusions on rolling contact fatigue life of bearing steels
- (2012) K Hashimoto et al. MATERIALS SCIENCE AND TECHNOLOGY
- White structure flaking (WSF) in wind turbine gearbox bearings: effects of ‘butterflies’ and white etching cracks (WECs)
- (2012) M-H Evans MATERIALS SCIENCE AND TECHNOLOGY
- Influence of micropolar lubricant on bearings performance: A review
- (2012) Pankaj Khatak et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Analyzing bearing faults in wind turbines: A data-mining approach
- (2012) Andrew Kusiak et al. RENEWABLE ENERGY
- Condition monitoring of wind turbines: Techniques and methods
- (2012) Fausto Pedro García Márquez et al. RENEWABLE ENERGY
- Effect of as-ground surface and the BALINIT® C and Nb–S coatings on contact fatigue damage in gears
- (2012) V. Moorthy et al. TRIBOLOGY INTERNATIONAL
- Effect of water on ZDDP anti-wear performance and related tribochemistry in lubricated steel/steel pure sliding contacts
- (2012) Hui Cen et al. TRIBOLOGY INTERNATIONAL
- Friction torque of cylindrical roller thrust bearings lubricated with wind turbine gear oils
- (2012) Carlos M.C.G. Fernandes et al. TRIBOLOGY INTERNATIONAL
- Friction torque of thrust ball bearings lubricated with wind turbine gear oils
- (2012) Carlos M.C.G. Fernandes et al. TRIBOLOGY INTERNATIONAL
- Wind turbine condition monitoring: technical and commercial challenges
- (2012) Wenxian Yang et al. WIND ENERGY
- FPGA-Based Online Detection of Multiple Combined Faults in Induction Motors Through Information Entropy and Fuzzy Inference
- (2011) Rene J. Romero-Troncoso et al. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
- Influence of non‐Newtonian behavior of lubricant on performance of hole‐entry hybrid journal bearings employing constant flow valve restrictors
- (2011) H.C. Garg INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Predictive maintenance of a reducer with contaminated oil under an excentrical load through vibration and oil analysis
- (2011) Aparecido Carlos Gonçalves et al. Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Detailed State of the Art Review for the Different Online/Inline Oil Analysis Techniques in Context of Wind Turbine Gearboxes
- (2011) Andrew Hamilton et al. JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME
- Micropitting Modelling in Rolling–Sliding Contacts: Application to Rolling Bearings
- (2011) G. E. Morales-Espejel et al. TRIBOLOGY TRANSACTIONS
- Friction and wear behaviour of boron based surface treatment and nano-particle lubricant additives for wind turbine gearbox applications
- (2011) A. Greco et al. WEAR
- Condition Monitoring of the Power Output of Wind Turbine Generators Using Wavelets
- (2010) Simon Jonathan Watson et al. IEEE TRANSACTIONS ON ENERGY CONVERSION
- High-pressure behavior and tribological properties of wind turbine gear oil
- (2010) Sobahan Mia et al. Journal of Mechanical Science and Technology
- Tribological advancements for reliable wind turbine performance
- (2010) M. N. Kotzalas et al. PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Condition Monitoring of Slow-Speed Shafts and Bearings with Acoustic Emission
- (2010) M. Elforjani et al. STRAIN
- Fretting of WC/a-C:H and Cr2N Coatings Under Grease-Lubricated and Unlubricated Conditions
- (2010) Benjamin D. Leonard et al. TRIBOLOGY TRANSACTIONS
- Cost-Effective Condition Monitoring for Wind Turbines
- (2009) Wenxian Yang et al. IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS
- A Smart Sensing Unit for Vibration Measurement and Monitoring
- (2009) W. Wang et al. IEEE-ASME TRANSACTIONS ON MECHATRONICS
- Reliability of wind turbine subassemblies
- (2009) F. Spinato et al. IET Renewable Power Generation
- Thermohydrostatic analysis of capillary compensated symmetric hole‐entry hybrid journal bearing operating with non‐Newtonian lubricant
- (2009) H.C. Garg et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- EBSD investigation of the crack initiation and TEM/FIB analyses of the microstructural changes around the cracks formed under Rolling Contact Fatigue (RCF)
- (2009) A. Grabulov et al. INTERNATIONAL JOURNAL OF FATIGUE
- Surface analysis on rolling bearings after exposure to defined electric stress
- (2009) T Zika et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Analysis of thermal effects in capillary compensated hole-entry hybrid journal bearings lubricated with a non-Newtonian lubricant
- (2009) H C Garg et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY
- Climate change impacts on wind energy: A review
- (2009) S.C. Pryor et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Wind turbine productivity considering electrical subassembly reliability
- (2009) H. Arabian-Hoseynabadi et al. RENEWABLE ENERGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now