标题
Porous Scaffold Design for Additive Manufacturing in Orthopedics: A Review
作者
关键词
-
出版物
Frontiers in Bioengineering and Biotechnology
Volume 8, Issue -, Pages -
出版商
Frontiers Media SA
发表日期
2020-06-17
DOI
10.3389/fbioe.2020.00609
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Wireless sensor enables longitudinal monitoring of regenerative niche mechanics during rehabilitation that enhance bone repair
- (2020) Brett S. Klosterhoff et al. BONE
- Biological and mechanical property analysis for designed heterogeneous porous scaffolds based on the refined TPMS
- (2020) Songhua Ma et al. Journal of the Mechanical Behavior of Biomedical Materials
- Trabecular-like Ti-6Al-4V scaffolds for orthopedic: fabrication by selective laser melting and in vitro biocompatibility
- (2019) Huixin Liang et al. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
- Influence of Porosity on the Mechanical Behavior during Uniaxial Compressive Testing on Voronoi-Based Open-Cell Aluminium Foam
- (2019) Varun Sharma et al. Materials
- Design and Optimization of Graded Cellular Structures With Triply Periodic Level Surface-Based Topological Shapes
- (2019) Dawei Li et al. JOURNAL OF MECHANICAL DESIGN
- Numerical and experimental evaluation of TPMS Gyroid scaffolds for bone tissue engineering
- (2019) A. P. G. Castro et al. COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
- Novel β-Ti35Zr28Nb alloy scaffolds manufactured using selective laser melting for bone implant applications
- (2019) Yuncang Li et al. Acta Biomaterialia
- Personalized Design of Functional Gradient Bone Tissue Engineering Scaffold
- (2019) Wei Chen et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
- Permeability versus Design in TPMS Scaffolds
- (2019) Castro et al. Materials
- Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces
- (2019) H. Montazerian et al. Acta Biomaterialia
- A state-of-the-art review on types, design, optimization, and additive manufacturing of cellular structures
- (2019) Aamer Nazir et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Bionic mechanical design and 3D printing of novel porous Ti6Al4V implants for biomedical applications
- (2019) Wen-ming Peng et al. Journal of Zhejiang University-SCIENCE B
- Designing Cellular Structures for Additive Manufacturing Using Voronoi–Monte Carlo Approach
- (2019) Liu et al. Polymers
- Multi-property cellular material design approach based on the mechanical behaviour analysis of the reinforced lattice structure
- (2019) X. Ren et al. MATERIALS & DESIGN
- Synthetic bone: Design by additive manufacturing
- (2019) D. Barba et al. Acta Biomaterialia
- Compression-compression fatigue behaviour of Gyroid-type Triply Periodic Minimal Surface porous structures fabricated by Selective Laser Melting
- (2019) Lei Yang et al. ACTA MATERIALIA
- Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: A CFD analysis
- (2019) Davar Ali et al. EUROPEAN JOURNAL OF MECHANICS B-FLUIDS
- Implicit-Function-Based Design and Additive Manufacturing of Triply Periodic Minimal Surfaces Scaffolds for Bone Tissue Engineering
- (2019) Yogesh Tripathi et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Analytical model of the elastic behavior of a modified face-centered cubic lattice structure
- (2019) Markel Alaña et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical performance of highly permeable laser melted Ti6Al4V bone scaffolds
- (2019) Arun Arjunan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Comparison of 3D-printed porous tantalum and titanium scaffolds on osteointegration and osteogenesis
- (2019) Han Wang et al. Materials Science & Engineering C-Materials for Biological Applications
- Design and Performance Evaluation of Porous Titanium Alloy Structures for Bone Implantation
- (2019) Jianping Shi et al. MATHEMATICAL PROBLEMS IN ENGINEERING
- Porous Tantalum and Titanium in Orthopedics: A Review
- (2019) Qing Han et al. ACS Biomaterials-Science & Engineering
- Design and statistical analysis of irregular porous scaffolds for orthopedic reconstruction based on voronoi tessellation and fabricated via selective laser melting (SLM)
- (2019) Yue Du et al. MATERIALS CHEMISTRY AND PHYSICS
- Influence of the pore size and porosity of selective laser melted Ti6Al4V ELI porous scaffold on cell proliferation, osteogenesis and bone ingrowth
- (2019) Ziyu Chen et al. Materials Science & Engineering C-Materials for Biological Applications
- Additively manufactured biodegradable porous iron
- (2018) Y. Li et al. Acta Biomaterialia
- Additively manufactured biodegradable porous magnesium
- (2018) Y. Li et al. Acta Biomaterialia
- Porous Titanium Implants: A Review
- (2018) Krzysztof Pałka et al. ADVANCED ENGINEERING MATERIALS
- A mathematical multiscale model of bone remodeling, accounting for pore space-specific mechanosensation
- (2018) Maria-Ioana Pastrama et al. BONE
- Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing
- (2018) Dawei Li et al. COMPUTER-AIDED DESIGN
- Design of complex bone internal structure using topology optimization with perimeter control
- (2018) Jaejong Park et al. COMPUTERS IN BIOLOGY AND MEDICINE
- Osteogenesis of 3D printed porous Ti6Al4V implants with different pore sizes
- (2018) Qichun Ran et al. Journal of the Mechanical Behavior of Biomedical Materials
- Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting
- (2018) M. Dallago et al. Journal of the Mechanical Behavior of Biomedical Materials
- Effect of porous structure and pore size on mechanical strength of 3D-printed comby scaffolds
- (2018) Hongxia Zhao et al. MATERIALS LETTERS
- Compressive characteristics of radially graded porosity scaffolds architectured with minimal surfaces
- (2018) M. Afshar et al. Materials Science & Engineering C-Materials for Biological Applications
- Mechanical Properties of Optimized Diamond Lattice Structure for Bone Scaffolds Fabricated via Selective Laser Melting
- (2018) Fei Liu et al. Materials
- A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering
- (2018) Jianping Shi et al. Scientific Reports
- Geometric Modeling of Cellular Materials for Additive Manufacturing in Biomedical Field: A Review
- (2018) Gianpaolo Savio et al. Applied Bionics and Biomechanics
- Mechanical Properties and In Vitro Behavior of Additively Manufactured and Functionally Graded Ti6Al4V Porous Scaffolds
- (2018) Ezgi Onal et al. Metals
- Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing
- (2018) Guanjun Wang et al. ACS Biomaterials-Science & Engineering
- Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading
- (2018) I. Maskery et al. MATERIALS & DESIGN
- The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction
- (2018) Boqing Zhang et al. MATERIALS & DESIGN
- Design and Compressive Behavior of Controllable Irregular Porous Scaffolds: Based on Voronoi-Tessellation and for Additive Manufacturing
- (2018) Guanjun Wang et al. ACS Biomaterials Science & Engineering
- Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting
- (2018) Lei Yang et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials
- (2018) Xiang-Yu Zhang et al. Acta Biomaterialia
- Mechanical properties of porous titanium alloy scaffold fabricated using additive manufacturing technology
- (2018) Yu Xia et al. INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS
- Determination of the Elasticity Modulus of 3D-Printed Octet-Truss Structures for Use in Porous Prosthesis Implants
- (2018) Ali Bagheri et al. Materials
- Effect of Unit Cell Type and Pore Size on Porosity and Mechanical Behavior of Additively Manufactured Ti6Al4V Scaffolds
- (2018) Haizum Zaharin et al. Materials
- Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties
- (2018) Lei Yang et al. MATERIALS & DESIGN
- Layered infill area generation from triply periodic minimal surfaces for additive manufacturing
- (2018) Jiawei Feng et al. COMPUTER-AIDED DESIGN
- Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints
- (2018) Lin Cheng et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- A review on metallic porous materials: pore formation, mechanical properties, and their applications
- (2017) Biao Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Mechanical properties of open-cell rhombic dodecahedron titanium alloy lattice structure manufactured using electron beam melting under dynamic loading
- (2017) Lijun Xiao et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Design and fabrication of graduated porous Ti-based alloy implants for biomedical applications
- (2017) Jianping Shi et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Compression fatigue behavior and failure mechanism of porous titanium for biomedical applications
- (2017) Fuping Li et al. Journal of the Mechanical Behavior of Biomedical Materials
- Promising characteristics of gradient porosity Ti-6Al-4V alloy prepared by SLM process
- (2017) Michaela Fousová et al. Journal of the Mechanical Behavior of Biomedical Materials
- The turtle carapace as an optimized multi-scale biological composite armor – A review
- (2017) Ben Achrai et al. Journal of the Mechanical Behavior of Biomedical Materials
- The effect of pore size and porosity on mechanical properties and biological response of porous titanium scaffolds
- (2017) C. Torres-Sanchez et al. Materials Science & Engineering C-Materials for Biological Applications
- Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing
- (2017) I. Maskery et al. POLYMER
- Fabrication Aspects of Porous Biomaterials in Orthopedic Applications: A Review
- (2017) Elham Babaie et al. ACS Biomaterials-Science & Engineering
- Mapping porous microstructures to yield desired mechanical properties for application in 3D printed bone scaffolds and orthopaedic implants
- (2017) Ling Wang et al. MATERIALS & DESIGN
- Porous scaffold internal architecture design based on minimal surfaces: A compromise between permeability and elastic properties
- (2017) H. Montazerian et al. MATERIALS & DESIGN
- Mechanical properties of 3D printed polymeric cellular materials with triply periodic minimal surface architectures
- (2017) Diab W. Abueidda et al. MATERIALS & DESIGN
- Stiffness and strength tailoring of cobalt chromium graded cellular structures for stress-shielding reduction
- (2017) Sakkadech Limmahakhun et al. MATERIALS & DESIGN
- Fabrication Aspects of Porous Biomaterials in Orthopedic Applications: A Review
- (2017) Elham Babaie et al. ACS Biomaterials Science & Engineering
- Design and properties of 3D scaffolds for bone tissue engineering
- (2016) S. Gómez et al. Acta Biomaterialia
- High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints
- (2016) Sajad Arabnejad et al. Acta Biomaterialia
- Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting
- (2016) Y.J. Liu et al. ACTA MATERIALIA
- Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
- (2016) Xiaojian Wang et al. BIOMATERIALS
- Dynamic response of functionally graded cellular materials based on the Voronoi model
- (2016) Jianjun Zhang et al. COMPOSITES PART B-ENGINEERING
- Computational prediction of the fatigue behavior of additively manufactured porous metallic biomaterials
- (2016) R. Hedayati et al. INTERNATIONAL JOURNAL OF FATIGUE
- Mechanical behavior of additively manufactured porous biomaterials made from truncated cuboctahedron unit cells
- (2016) R. Hedayati et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Cellular response of osteoblasts to low modulus Ti-24Nb-4Zr-8Sn alloy mesh structure
- (2016) K. C. Nune et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- An investigation into reinforced and functionally graded lattice structures
- (2016) Ian Maskery et al. JOURNAL OF CELLULAR PLASTICS
- Design and Analysis of Lattice Structures for Additive Manufacturing
- (2016) Christiane Beyer et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting
- (2016) S. Zhao et al. Journal of the Mechanical Behavior of Biomedical Materials
- Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures
- (2016) M. Afshar et al. Journal of the Mechanical Behavior of Biomedical Materials
- Compressive behaviour of gyroid lattice structures for human cancellous bone implant applications
- (2016) A. Yánez et al. Materials Science & Engineering C-Materials for Biological Applications
- Numerical simulation of the fatigue behavior of additive manufactured titanium porous lattice structures
- (2016) A. Zargarian et al. Materials Science & Engineering C-Materials for Biological Applications
- Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: An in vivo experiment
- (2016) Naoya Taniguchi et al. Materials Science & Engineering C-Materials for Biological Applications
- An investigation of the mechanical properties of metallic lattice structures fabricated using selective laser melting
- (2016) Qixiang Feng et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- A survey of the design methods for additive manufacturing to improve functional performance
- (2016) Yunlong Tang et al. RAPID PROTOTYPING JOURNAL
- Biomedical titanium alloys and their additive manufacturing
- (2016) Yu-Lin Hao et al. RARE METALS
- In vitro and in vivo study of additive manufactured porous Ti6Al4V scaffolds for repairing bone defects
- (2016) Guoyuan Li et al. Scientific Reports
- Biomechanical stability of novel mechanically adapted open-porous titanium scaffolds in metatarsal bone defects of sheep
- (2015) Jan Wieding et al. BIOMATERIALS
- The relationship between porosity and specific surface in human cortical bone is subject specific
- (2015) C. Lerebours et al. BONE
- Static and dynamic fatigue behavior of topology designed and conventional 3D printed bioresorbable PCL cervical interbody fusion devices
- (2015) Ashleen R. Knutsen et al. Journal of the Mechanical Behavior of Biomedical Materials
- Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials
- (2015) S. Amin Yavari et al. Journal of the Mechanical Behavior of Biomedical Materials
- Ti–6Al–4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting
- (2015) Chunze Yan et al. Journal of the Mechanical Behavior of Biomedical Materials
- Failure mechanisms of additively manufactured porous biomaterials: Effects of porosity and type of unit cell
- (2015) J. Kadkhodapour et al. Journal of the Mechanical Behavior of Biomedical Materials
- Mechanical behavior of open-cell rhombic dodecahedron Ti–6Al–4V lattice structure
- (2015) Lijun Xiao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Bioresorbable scaffolds for bone tissue engineering: Optimal design, fabrication, mechanical testing and scale-size effects analysis
- (2015) Pedro G. Coelho et al. MEDICAL ENGINEERING & PHYSICS
- Experimental-assisted design development for an octahedral cellular structure using additive manufacturing
- (2015) Li Yang RAPID PROTOTYPING JOURNAL
- Additively Manufactured Open-Cell Porous Biomaterials Made from Six Different Space-Filling Unit Cells: The Mechanical and Morphological Properties
- (2015) Seyed Ahmadi et al. Materials
- Bone tissue regeneration: the role of scaffold geometry
- (2015) Amir A. Zadpoor Biomaterials Science
- Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells
- (2014) S.M. Ahmadi et al. Journal of the Mechanical Behavior of Biomedical Materials
- Multilayer scaffolds in orthopaedic tissue engineering
- (2014) Kivanc Atesok et al. KNEE SURGERY SPORTS TRAUMATOLOGY ARTHROSCOPY
- Optimization of scaffold design for bone tissue engineering: A computational and experimental study
- (2014) Marta R. Dias et al. MEDICAL ENGINEERING & PHYSICS
- Computer Aided–Designed, 3-Dimensionally Printed Porous Tissue Bioscaffolds for Craniofacial Soft Tissue Reconstruction
- (2014) David A. Zopf et al. OTOLARYNGOLOGY-HEAD AND NECK SURGERY
- Porous Biodegradable Lumbar Interbody Fusion Cage Design and Fabrication Using Integrated Global-Local Topology Optimization With Laser Sintering
- (2013) Heesuk Kang et al. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME
- Coupling systems biology with multiscale mechanics, for computer simulations of bone remodeling
- (2012) Stefan Scheiner et al. COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING
- A paradigm for the development and evaluation of novel implant topologies for bone fixation: Implant design and fabrication
- (2012) Heesuk Kang et al. JOURNAL OF BIOMECHANICS
- Permeability analysis of scaffolds for bone tissue engineering
- (2012) M.R. Dias et al. JOURNAL OF BIOMECHANICS
- On the optimal shape of hip implants
- (2011) Rui B. Ruben et al. JOURNAL OF BIOMECHANICS
- Effect of Polycaprolactone Scaffold Permeability on Bone Regeneration In Vivo
- (2011) Anna G. Mitsak et al. TISSUE ENGINEERING PART A
- A simple and effective geometric representation for irregular porous structure modeling
- (2010) X.Y. Kou et al. COMPUTER-AIDED DESIGN
- Topology optimization of three dimensional tissue engineering scaffold architectures for prescribed bulk modulus and diffusivity
- (2010) Heesuk Kang et al. STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION
- Scaffold Design and Manufacturing: From Concept to Clinic
- (2009) Scott J. Hollister ADVANCED MATERIALS
- The pore size of polycaprolactone scaffolds has limited influence on bone regeneration in anin vivomodel
- (2009) Sara M. Mantila Roosa et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Rapid Prototyping: Porous Titanium Alloy Scaffolds Produced by Selective Laser Melting for Bone Tissue Engineering
- (2008) Patrick H. Warnke et al. TISSUE ENGINEERING PART C-METHODS
Create your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create NowAsk a Question. Answer a Question.
Quickly pose questions to the entire community. Debate answers and get clarity on the most important issues facing researchers.
Get Started