标题
Application of Micro-Scale 3D Printing in Pharmaceutics
作者
关键词
-
出版物
Pharmaceutics
Volume 11, Issue 8, Pages 390
出版商
MDPI AG
发表日期
2019-08-05
DOI
10.3390/pharmaceutics11080390
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Hyaline cartilage next generation implants from Adipose Tissue Derived Mesenchymal Stem Cells: Comparative study on 3D-Printed Polycaprolactone scaffold patterns
- (2019) K. Theodoridis et al. Journal of Tissue Engineering and Regenerative Medicine
- The Digital Pharmacies Era: How 3D Printing Technology Using Fused Deposition Modeling Can Become a Reality
- (2019) Maisa Araújo et al. Pharmaceutics
- Osteogenic magnesium incorporated into PLGA/TCP porous scaffold by 3D printing for repairing challenging bone defect
- (2019) Yuxiao Lai et al. BIOMATERIALS
- Additive manufacturing of personalized orodispersible warfarin films
- (2019) Erica Sjöholm et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Direct powder extrusion 3D printing: Fabrication of drug products using a novel single-step process
- (2019) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Design and development of zero-order drug release gastroretentive floating tablets fabricated by 3D printing technology
- (2019) Kampanart Huanbutta et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- Influence of Geometry on the Drug Release Profiles of Stereolithographic (SLA) 3D-Printed Tablets
- (2018) Pamela Robles Martinez et al. AAPS PHARMSCITECH
- 3D bioprinting of functional tissue models for personalized drug screening and in vitro disease modeling
- (2018) Xuanyi Ma et al. ADVANCED DRUG DELIVERY REVIEWS
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Reshaping drug development using 3D printing
- (2018) Atheer Awad et al. DRUG DISCOVERY TODAY
- Tablet fragmentation without a disintegrant: A novel design approach for accelerating disintegration and drug release from 3D printed cellulosic tablets
- (2018) Basel Arafat et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- From ‘fixed dose combinations’ to ‘a dynamic dose combiner’: 3D printed bi-layer antihypertensive tablets
- (2018) Muzna Sadia et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing
- (2018) Qijun Li et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed microneedles for insulin skin delivery
- (2018) Cristiane Patricia Pissinato Pere et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Fabricating 3D printed orally disintegrating printlets using selective laser sintering
- (2018) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Defined drug release from 3D-printed composite tablets consisting of drug-loaded polyvinylalcohol and a water-soluble or water-insoluble polymer filler
- (2018) Tatsuaki Tagami et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed medicines: A new branch of digital healthcare
- (2018) Atheer Awad et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of high drug loaded dosage forms using thermoplastic polyurethanes
- (2018) G. Verstraete et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of drug-loaded gyroid lattices using selective laser sintering
- (2018) Fabrizio Fina et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Controlling release from 3D printed medical devices using CLIP and drug-loaded liquid resins
- (2018) Cameron J. Bloomquist et al. JOURNAL OF CONTROLLED RELEASE
- Channelled tablets: An innovative approach to accelerating drug release from 3D printed tablets
- (2018) Muzna Sadia et al. JOURNAL OF CONTROLLED RELEASE
- The Application of 3D Printing in the Formulation of Multilayered Fast Dissolving Oral Films
- (2018) Touraj Ehtezazi et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Biodegradable 3D printed polymer microneedles for transdermal drug delivery
- (2018) Michael A. Luzuriaga et al. LAB ON A CHIP
- 3D Printing Pharmaceuticals: Drug Development to Frontline Care
- (2018) Sarah J. Trenfield et al. TRENDS IN PHARMACOLOGICAL SCIENCES
- Light-Triggered Drug Release from 3D-Printed Magnetic Chitosan Microswimmers
- (2018) Ugur Bozuyuk et al. ACS Nano
- 3D printing of tablets containing amorphous aripiprazole by filaments co-extrusion
- (2018) Witold Jamróz et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- An Overview of 3D Printing Technologies for Soft Materials and Potential Opportunities for Lipid-based Drug Delivery Systems
- (2018) Kapilkumar Vithani et al. PHARMACEUTICAL RESEARCH
- A review on benchmark artifacts for evaluating the geometrical performance of additive manufacturing processes
- (2017) Lara Rebaioli et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Fabrication of drug-loaded hydrogels with stereolithographic 3D printing
- (2017) Pamela Robles Martinez et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Development of modified release 3D printed tablets (printlets) with pharmaceutical excipients using additive manufacturing
- (2017) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printed orodispersible films with Aripiprazole
- (2017) Witold Jamróz et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Applications of additive manufacturing in dentistry: A review
- (2017) Aishwarya Bhargav et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS
- 3D printed multi-compartment capsular devices for two-pulse oral drug delivery
- (2017) A. Maroni et al. JOURNAL OF CONTROLLED RELEASE
- 3D inkjet printing of tablets exploiting bespoke complex geometries for controlled and tuneable drug release
- (2017) Mary Kyobula et al. JOURNAL OF CONTROLLED RELEASE
- 3D Printing of Polymer Nanocomposites via Stereolithography
- (2017) Jill Z. Manapat et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Accuracy and feasibility of piezoelectric inkjet coating technology for applications in microneedle-based transdermal delivery
- (2017) Conor O'Mahony et al. MICROELECTRONIC ENGINEERING
- An overview of additive manufacturing (3D printing) for microfabrication
- (2017) Bharat Bhushan et al. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS
- Measuring and Establishing the Accuracy and Reproducibility of 3D Printed Medical Models
- (2017) Elizabeth George et al. RADIOGRAPHICS
- The Emerging Frontiers and Applications of High-Resolution 3D Printing
- (2017) Mao Mao et al. Micromachines
- ECM and ECM-like materials — Biomaterials for applications in regenerative medicine and cancer therapy
- (2016) Svenja Hinderer et al. ADVANCED DRUG DELIVERY REVIEWS
- 3D Bioprinting of Tissue/Organ Models
- (2016) Falguni Pati et al. ANGEWANDTE CHEMIE-INTERNATIONAL EDITION
- Design and Fabrication of Complex Scaffolds for Bone Defect Healing: Combined 3D Plotting of a Calcium Phosphate Cement and a Growth Factor-Loaded Hydrogel
- (2016) Tilman Ahlfeld et al. ANNALS OF BIOMEDICAL ENGINEERING
- Inkjet deposition of itraconazole onto poly(glycolic acid) microneedle arrays
- (2016) Ryan D. Boehm et al. Biointerphases
- Osteogenic effect of controlled released rhBMP-2 in 3D printed porous hydroxyapatite scaffold
- (2016) Hai Wang et al. COLLOIDS AND SURFACES B-BIOINTERFACES
- Dissolvable microneedle fabrication using piezoelectric dispensing technology
- (2016) Evin A. Allen et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Process Development of Porcelain Ceramic Material with Binder Jetting Process for Dental Applications
- (2016) Hadi Miyanaji et al. JOM
- 3D printing of high-resolution PLA-based structures by hybrid electrohydrodynamic and fused deposition modeling techniques
- (2016) Bin Zhang et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING
- The upcoming 3D-printing revolution in microfluidics
- (2016) Nirveek Bhattacharjee et al. LAB ON A CHIP
- A synergistic approach to the design, fabrication and evaluation of 3D printed micro and nano featured scaffolds for vascularized bone tissue repair
- (2016) Benjamin Holmes et al. NANOTECHNOLOGY
- A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
- (2016) Hyun-Wook Kang et al. NATURE BIOTECHNOLOGY
- Fabricating a Shell-Core Delayed Release Tablet Using Dual FDM 3D Printing for Patient-Centred Therapy
- (2016) Tochukwu C. Okwuosa et al. PHARMACEUTICAL RESEARCH
- Emergence of 3D Printed Dosage Forms: Opportunities and Challenges
- (2016) Mohamed A. Alhnan et al. PHARMACEUTICAL RESEARCH
- Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production
- (2016) Ashley R. Johnson et al. PLoS One
- Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting
- (2016) Xuanyi Ma et al. PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
- Inkjet deposition of itraconazole onto poly(glycolic acid) microneedle arrays
- (2016) Ryan D. Boehm et al. Biointerphases
- Biologically Inspired Smart Release System Based on 3D Bioprinted Perfused Scaffold for Vascularized Tissue Regeneration
- (2016) Haitao Cui et al. Advanced Science
- Bioprinted 3D Primary Liver Tissues Allow Assessment of Organ-Level Response to Clinical Drug Induced Toxicity In Vitro
- (2016) Deborah G. Nguyen et al. PLoS One
- 3D-printed hierarchical scaffold for localized isoniazid/rifampin drug delivery and osteoarticular tuberculosis therapy
- (2015) Min Zhu et al. Acta Biomaterialia
- Fabrication of novel Si-doped hydroxyapatite/gelatine scaffolds by rapid prototyping for drug delivery and bone regeneration
- (2015) F.J. Martínez-Vázquez et al. Acta Biomaterialia
- 3D Printed Microtransporters: Compound Micromachines for Spatiotemporally Controlled Delivery of Therapeutic Agents
- (2015) Tian-Yun Huang et al. ADVANCED MATERIALS
- Printing Tablets with Fully Customizable Release Profiles for Personalized Medicine
- (2015) Yajuan Sun et al. ADVANCED MATERIALS
- Polyglycolic acid microneedles modified with inkjet-deposited antifungal coatings
- (2015) Ryan D. Boehm et al. Biointerphases
- 3D Printing technologies for drug delivery: a review
- (2015) Leena Kumari Prasad et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
- (2015) Alvaro Goyanes et al. EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS
- Inkjet printing of transdermal microneedles for the delivery of anticancer agents
- (2015) Md Jasim Uddin et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of tablets containing multiple drugs with defined release profiles
- (2015) Shaban A. Khaled et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- Effect of geometry on drug release from 3D printed tablets
- (2015) Alvaro Goyanes et al. INTERNATIONAL JOURNAL OF PHARMACEUTICS
- 3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
- (2015) Shaban A. Khaled et al. JOURNAL OF CONTROLLED RELEASE
- 3D printing by fused deposition modeling (FDM) of a swellable/erodible capsular device for oral pulsatile release of drugs
- (2015) Alice Melocchi et al. JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY
- 3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
- (2015) Alvaro Goyanes et al. MOLECULAR PHARMACEUTICS
- A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing
- (2015) Seyed Farid Seyed Shirazi et al. SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS
- Mitigation of tracheobronchomalacia with 3D-printed personalized medical devices in pediatric patients
- (2015) Robert J. Morrison et al. Science Translational Medicine
- Polyglycolic acid microneedles modified with inkjet-deposited antifungal coatings
- (2015) Ryan D. Boehm et al. Biointerphases
- A novel cell-printing method and its application to hepatogenic differentiation of human adipose stem cell-embedded mesh structures
- (2015) Seung Hyun Ahn et al. Scientific Reports
- Three-Dimensional Cell Culture Systems and Their Applications in Drug Discovery and Cell-Based Biosensors
- (2014) Rasheena Edmondson et al. ASSAY AND DRUG DEVELOPMENT TECHNOLOGIES
- Micropattern width dependent sarcomere development in human ESC-derived cardiomyocytes
- (2014) Max R. Salick et al. BIOMATERIALS
- 3D bioprinting of tissues and organs
- (2014) Sean V Murphy et al. NATURE BIOTECHNOLOGY
- Options for additive rapid prototyping methods (3D printing) in MEMS technology
- (2014) Victor A. Lifton et al. RAPID PROTOTYPING JOURNAL
- Artificial Bacterial Flagella for Remote-Controlled Targeted Single-Cell Drug Delivery
- (2014) Rami Mhanna et al. Small
- Swimming by reciprocal motion at low Reynolds number
- (2014) Tian Qiu et al. Nature Communications
- Three-dimensional filamentous human diseased cardiac tissue model
- (2013) Zhen Ma et al. BIOMATERIALS
- Selective laser sintering/melting (SLS/SLM) of pure Al, Al–Mg, and Al–Si powders: Effect of processing conditions and powder properties
- (2013) E.O. Olakanmi JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Effect of Microneedle Geometry and Supporting Substrate on Microneedle Array Penetration into Skin
- (2013) Jaspreet Singh Kochhar et al. JOURNAL OF PHARMACEUTICAL SCIENCES
- Magnetic Helical Micromachines: Fabrication, Controlled Swimming, and Cargo Transport
- (2012) Soichiro Tottori et al. ADVANCED MATERIALS
- Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques
- (2012) Natalja Genina et al. EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES
- A review on 3D micro-additive manufacturing technologies
- (2012) Mohammad Vaezi et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The effects of geometry on skin penetration and failure of polymer microneedles
- (2012) Shaun D. Gittard et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Selective laser sintering in biomedical engineering
- (2012) Alida Mazzoli MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
- Deposition of antimicrobial coatings on microstereolithography-fabricated microneedles
- (2011) Shaun D. Gittard et al. JOM
- Modification of microneedles using inkjet printing
- (2011) R D Boehm et al. AIP Advances
- Two Photon Polymerization-Micromolding of Polyethylene Glycol-Gentamicin Sulfate Microneedles
- (2010) Shaun D. Gittard et al. ADVANCED ENGINEERING MATERIALS
- Simultaneous Immobilization of Bioactives During 3D Powder Printing of Bioceramic Drug-Release Matrices
- (2010) Elke Vorndran et al. ADVANCED FUNCTIONAL MATERIALS
- Two-photon polymerization of microneedles for transdermal drug delivery
- (2010) Shaun D Gittard et al. Expert Opinion on Drug Delivery
- Multiphoton microscopy of transdermal quantum dot delivery using two photonpolymerization-fabricated polymer microneedles
- (2010) Shaun D. Gittard et al. FARADAY DISCUSSIONS
- Scaffold microarchitecture determines internal bone directional growth structure: A numerical study
- (2010) J.A. Sanz-Herrera et al. JOURNAL OF BIOMECHANICS
- Fabrication of Microneedles Using Two Photon Polymerization for Transdermal Delivery of Nanomaterials
- (2010) Anand Doraiswamy et al. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
- Biofabrication of a three-dimensional liver micro-organ as anin vitrodrug metabolism model
- (2010) Robert Chang et al. Biofabrication
- A programmed release multi-drug implant fabricated by three-dimensional printing technology for bone tuberculosis therapy
- (2009) Weigang Wu et al. Biomedical Materials
- Improving Pharmaceutical Product Development and Manufacturing: Impact on Cost of Drug Development and Cost of Goods Sold of Pharmaceuticals
- (2008) Pradeep Suresh et al. Journal of Pharmaceutical Innovation
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreAdd your recorded webinar
Do you already have a recorded webinar? Grow your audience and get more views by easily listing your recording on Peeref.
Upload Now