Size Control of Cobalt-Doped ZnO Nanoparticles Obtained in Microwave Solvothermal Synthesis

This article presents the method of size control of cobalt-doped zinc oxide nanoparticles (Zn1-xCoxO NPs) obtained by means of the microwave solvothermal synthesis. Zinc acetate dihydrate and cobalt(II) acetate tetrahydrate dissolved in ethylene glycol were used as the precursor. It has been proved by the example of Zn0.9Co0.1O NPs (x = 10 mol %) that by controlling the water quantity in the precursor it is possible to precisely control the size of the obtained Zn1-xCoxO NPs. The following properties of the obtained Zn0.9Co0.1O NPs were tested: skeleton density (helium pycnometry), specific surface area (BET), dopant content (ICP-OES), morphology (SEM), phase purity (XRD), lattice parameter (Rietveld method), average crystallite size (FW1/5/4/5M method and Scherrer's formula), crystallite size distribution (FW1/5/4/5M method), and average particle size (from TEM and SSA). An increase in the water content in the precursor between 1.5% and 5% resulted in the increase in Zn0.9Co0.1O NPs size between 28 nm and 53 nm. The X-ray diffraction revealed the presence of only one hexagonal phase of ZnO in all samples. Scanning electron microscope images indicated an impact of the increase in water content in the precursor on the change of size and shape of the obtained Zn0.9Co0.1O NPs. The developed method of NPs size control in the microwave solvothermal synthesis was used for the first time for controlling the size of Zn1-xCoxO NPs.