标题
Overview of the Experimental Trends in Water-Assisted Injection Molding
作者
关键词
-
出版物
MACROMOLECULAR MATERIALS AND ENGINEERING
Volume -, Issue -, Pages 1800035
出版商
Wiley
发表日期
2018-06-05
DOI
10.1002/mame.201800035
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Electric Field-Assisted Orientation of Short Phosphate Glass Fibers on Stainless Steel for Biomedical Applications
- (2018) Qiang Chen et al. ACS Applied Materials & Interfaces
- Durably Antibacterial and Bacterially Antiadhesive Cotton Fabrics Coated by Cationic Fluorinated Polymers
- (2018) Jing Lin et al. ACS Applied Materials & Interfaces
- Excellent corrosion protection performance of epoxy composite coatings filled with silane functionalized silicon nitride
- (2018) Yongxing Zhang et al. JOURNAL OF POLYMER RESEARCH
- Shear-Induced Skin-Core Structure of Molten Isotactic Polypropylene and the Formation of β-Crystal
- (2018) Yamin Pan et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Controllable Cross-Linking Anion Exchange Membranes with Excellent Mechanical and Thermal Properties
- (2018) Chao Wang et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Molar mass and temperature dependence of rheological properties of polymethylmethacrylate melt
- (2018) Zhili Lu et al. MATERIALS LETTERS
- Light triggered interfacial damage self-healing of poly(p-phenylene benzobisoxazole) fiber composites
- (2018) Zhen Hu et al. NANOTECHNOLOGY
- Hydroxide ions transportation in polynorbornene anion exchange membrane
- (2018) Chao Wang et al. POLYMER
- Large negative giant magnetoresistance at room temperature and electrical transport in cobalt ferrite-polyaniline nanocomposites
- (2018) Hongbo Gu et al. POLYMER
- Polydimethylsiloxane-titania nanocomposite coating: Fabrication and corrosion resistance
- (2018) Xiaokun Cui et al. POLYMER
- Self-reinforcing and toughening isotactic polypropylene via melt sequential injection molding
- (2018) Jing Jiang et al. POLYMER TESTING
- Towards sustainable ultrafast molecular-separation membranes: From conventional polymers to emerging materials
- (2018) Xi Quan Cheng et al. PROGRESS IN MATERIALS SCIENCE
- Light-triggered C60 release from a graphene/cyclodextrin nanoplatform for the protection of cytotoxicity induced by nitric oxide
- (2018) Zhen Hu et al. Journal of Materials Chemistry B
- An overview of metamaterials and their achievements in wireless power transfer
- (2018) Kai Sun et al. Journal of Materials Chemistry C
- Significantly enhanced and precisely modeled thermal conductivity in polyimide nanocomposites with chemically modified graphene via in situ polymerization and electrospinning-hot press technology
- (2018) Yongqiang Guo et al. Journal of Materials Chemistry C
- Continuously prepared highly conductive and stretchable SWNT/MWNT synergistically composited electrospun thermoplastic polyurethane yarns for wearable sensing
- (2018) Yahong Li et al. Journal of Materials Chemistry C
- Micromechanical analysis of molecular orientation in high-temperature creep of polycarbonate
- (2018) Fei Luo et al. MATERIALS & DESIGN
- Non-covalently functionalized graphene strengthened poly(vinyl alcohol)
- (2018) Xiaodong Wang et al. MATERIALS & DESIGN
- Magnetic Nanocarbon Adsorbents with Enhanced Hexavalent Chromium Removal: Morphology Dependence of Fibrillar vs Particulate Structures
- (2017) Jiangnan Huang et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- The massive formation of hybrid shish-kebab structures in HDPE/PA6 microfibril blend subjected to melt second flow
- (2017) Dan-Dan Xie et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Reversal phenomena of molten immiscible polymer blends during creep-recovery in shear
- (2017) Yamin Pan et al. JOURNAL OF RHEOLOGY
- An Alternating Skin-Core Structure in Melt Multi-Injection-Molded Polyethylene
- (2017) Xianhu Liu et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Fabrication of a graphene/C60 nanohybrid via γ-cyclodextrin host–guest chemistry for photodynamic and photothermal therapy
- (2017) Zhen Hu et al. Nanoscale
- Overview of polymer nanocomposites: Computer simulation understanding of physical properties
- (2017) Jinbo Zhao et al. POLYMER
- Reparation of recycled acrylonitrile- butadiene-styrene by pyromellitic dianhydride: Reparation performance evaluation and property analysis
- (2017) Yingchun Li et al. POLYMER
- Viscoelastic and electrical behavior of poly(methyl methacrylate)/carbon black composites prior to and after annealing
- (2017) Yamin Pan et al. POLYMER
- Porous lignin based poly (acrylic acid)/organo-montmorillonite nanocomposites: Swelling behaviors and rapid removal of Pb (II) ions
- (2017) Yanli Ma et al. POLYMER
- Flexible polydimethylsiloxane/multi-walled carbon nanotubes membranous metacomposites with negative permittivity
- (2017) Kai Sun et al. POLYMER
- Silver nanoparticles/graphene oxide decorated carbon fiber synergistic reinforcement in epoxy-based composites
- (2017) Caifeng Wang et al. POLYMER
- Mechanical enhancement of melt-stretched β-nucleated isotactic polypropylene: The role of lamellar branching of β-crystal
- (2017) Zhongzhu Liu et al. POLYMER TESTING
- Flame-retardant rigid polyurethane foam with a phosphorus-nitrogen single intumescent flame retardant
- (2017) Chao Wang et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Comparative assessment of the strain-sensing behaviors of polylactic acid nanocomposites: reduced graphene oxide or carbon nanotubes
- (2017) Chao Hu et al. Journal of Materials Chemistry C
- Lightweight conductive graphene/thermoplastic polyurethane foams with ultrahigh compressibility for piezoresistive sensing
- (2017) Hu Liu et al. Journal of Materials Chemistry C
- A novel gas-assisted microcellular injection molding method for preparing lightweight foams with superior surface appearance and enhanced mechanical performance
- (2017) Junji Hou et al. MATERIALS & DESIGN
- Carbon Nanotubes-Adsorbed Electrospun PA66 Nanofiber Bundles with Improved Conductivity and Robust Flexibility
- (2016) Xiaoyang Guan et al. ACS Applied Materials & Interfaces
- Influence of the pressure-dependent contact area between electrode and composite surface on the electrical conductivity
- (2016) Xianhu Liu et al. COMPOSITE STRUCTURES
- Rheological and electrical behavior of poly(methyl methacrylate)/carbon black composites as investigated by creep recovery in shear
- (2016) Xianhu Liu et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Enhancing the electrical conductivity of carbon black-filled immiscible polymer blends by tuning the morphology
- (2016) Yamin Pan et al. EUROPEAN POLYMER JOURNAL
- Thin film composite forward osmosis membranes with poly(2-hydroxyethyl methacrylate) grafted nano-TiO2as additive in substrate
- (2016) Wu Kuang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Annealing Induced Mechanical Reinforcement of Injection Molded iPP Parts
- (2016) Yamin Pan et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Quantification of the Effect of Shish-Kebab Structure on the Mechanical Properties of Polypropylene Samples by Controlling Shear Layer Thickness
- (2016) Dashan Mi et al. MACROMOLECULES
- Twisted lamellae in water-assisted injection molded high density polyethylene
- (2016) Xianhu Liu et al. MATERIALS LETTERS
- Conductivity and phase morphology of carbon black-filled immiscible polymer blends under creep: an experimental and theoretical study
- (2016) Yamin Pan et al. PHYSICAL CHEMISTRY CHEMICAL PHYSICS
- Intermolecular cooperativity and entanglement network in a miscible PLA/PMMA blend in the presence of nanosilica
- (2016) Xiaoqiong Hao et al. POLYMER
- Electrically conductive thermoplastic elastomer nanocomposites at ultralow graphene loading levels for strain sensor applications
- (2016) Hu Liu et al. Journal of Materials Chemistry C
- Organic vapor sensing behaviors of conductive thermoplastic polyurethane–graphene nanocomposites
- (2016) Hu Liu et al. Journal of Materials Chemistry C
- Building and testing a simple setup to investigate the electrical properties of polymer/carbon black composites
- (2015) Xianhu Liu et al. COMPOSITE STRUCTURES
- Numerical simulation on residual thickness of pipes with curved sections in water-assisted co-injection molding
- (2015) Tang-Qing Kuang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Tuning Crystalline Morphology of High-Density Polyethylene by Tailoring its Molecular Weight Distribution for Coupling with a Secondary Flow Field
- (2015) Quan-Ping Zhang et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Enhancing oriented crystals in injection-molded HDPE through introduction of pre-shear
- (2015) Linxiang Huang et al. MATERIALS & DESIGN
- Entanglement network formed in miscible PLA/PMMA blends and its role in rheological and thermo-mechanical properties of the blends
- (2015) Xiaoqiong Hao et al. POLYMER
- Tailoring microstructure and mechanical properties of injection molded isotactic-polypropylene via high temperature preshear
- (2015) Baobao Chang et al. POLYMER ENGINEERING AND SCIENCE
- Orientation and structural development of semicrystalline poly(lactic acid) under uniaxial drawing assessed by infrared spectroscopy and X-ray diffraction
- (2015) Yaming Wang et al. POLYMER TESTING
- Defect Occurrence in Water-Assisted Injection-Molded Products: Definition and Responsible Formation Mechanisms
- (2014) SOFIE SANNEN et al. ADVANCES IN POLYMER TECHNOLOGY
- Temperature-resistivity characteristics of a segregated conductive CB/PP/UHMWPE composite
- (2014) Yue Wei et al. COLLOID AND POLYMER SCIENCE
- Electrical conductivity behaviour of sheared poly(methyl methacrylate)/carbon black composites
- (2014) Xianhu Liu et al. COMPOSITES SCIENCE AND TECHNOLOGY
- New insight into lamellar branching of β-nucleated isotactic polypropylene upon melt-stretching: WAXD and SAXS study
- (2014) Zhongzhu Liu et al. JOURNAL OF MATERIALS SCIENCE
- Process-induced phase and crystal morphologies in water-assisted injection molded polypropylene/polymeric β-nucleating agent blend parts
- (2014) Bin Wang et al. POLYMER ENGINEERING AND SCIENCE
- Mapping the Electrical Conductivity of Poly(methyl methacrylate)/Carbon Black Composites Prior to and after Shear
- (2013) Xianhu Liu et al. ACS Applied Materials & Interfaces
- In situ fibrillation of polymeric nucleating agents in polypropylene and subsequent transcrystallization propelled by high-pressure water penetration during water-assisted injection molding
- (2013) Bin Wang et al. COMPOSITES PART B-ENGINEERING
- Crystalline Structure of Injection Molded β-Isotactic Polypropylene: Analysis of the Oriented Shear Zone
- (2013) Xianhu Liu et al. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
- Study of water penetration length and processing parameters optimization in water-assisted injection molding
- (2013) Jian Gen Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Study of shear-induced interfacial crystallization in polymer-based composite through in situ monitoring interfacial shear stress
- (2013) Bingbing Sun et al. JOURNAL OF MATERIALS SCIENCE
- Wide distribution of shish-kebab structure and tensile property of micro-injection-molded isotactic polypropylene microparts: a comparative study with injection-molded macroparts
- (2013) Yamin Pan et al. JOURNAL OF MATERIALS SCIENCE
- Enhanced β-crystal formation of isotactic polypropylene under the combined effects of acid-corroded glass fiber and preshear
- (2013) Mancun Xie et al. POLYMER COMPOSITES
- Tailoring the crystalline structure of polypropylene parts molded through water-assisted injection molding: Effects of melt temperature and polymeric nucleating agent
- (2013) Bin Wang et al. POLYMER ENGINEERING AND SCIENCE
- Pre-shear induced anomalous distribution of β-form in injection molded iPP
- (2013) Baobao Chang et al. POLYMER TESTING
- Unusual structural evolution of poly(lactic acid) upon annealing in the presence of an initially oriented mesophase
- (2013) Yaming Wang et al. Soft Matter
- FORMATION MECHANISM OF TRANSCRYSTALS IN PP/SAN BLENDS PREPARED VIA WATER-ASSISTED INJECTION MOLDING
- (2012) Bin Wang et al. ACTA POLYMERICA SINICA
- Simulation and experiment research on the proportional pressure control of water-assisted injection molding
- (2012) Hua Zhou et al. Chinese Journal of Mechanical Engineering
- β-Crystal in injection moulded poly(ethylene terephthalate) fibre/isotactic polypropylene composite
- (2012) Caiqiao Ji et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Model and simulation of water penetration in water-assisted injection molding
- (2012) Jian Gen Yang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Residual Wall Thickness Study of Variable Cross-section Tube in Water-assisted Injection Molding
- (2012) J. G. Yang et al. INTERNATIONAL POLYMER PROCESSING
- Water Penetration Behavior in Water-assisted Injection Molding (WAIM): A Study of Product Quality for Different Process and Material Parameters
- (2012) S. Sannen et al. INTERNATIONAL POLYMER PROCESSING
- The hierarchical structure of water-assisted injection molded high density polyethylene: Small angle X-ray scattering study
- (2012) Xianhu Liu et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Fiber orientation propelled by high-pressure water penetration in water-assisted injection molded fiber-reinforced thermoplastics part
- (2012) Han-Xiong Huang et al. JOURNAL OF COMPOSITE MATERIALS
- Enhanced orientation of the water-assisted injection-molded ipp in the presence of nucleating agent
- (2012) Guo-Qiang Zheng et al. POLYMER ENGINEERING AND SCIENCE
- Crystallization behavior and molecular orientation of high density polyethylene parts prepared by gas-assisted injection molding
- (2012) Nan Sun et al. POLYMER INTERNATIONAL
- Unexpected molecular weight dependence of shish kebab in water-assisted injection molded HDPE
- (2012) Xianhu Liu et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Polymorphism in polyamide 6 and polyamide 6/clay nanocomposites molded via water-assisted injection molding
- (2011) Han-Xiong Huang et al. COMPOSITES PART B-ENGINEERING
- Model and Numerical Simulation for the Second Penetration in Water-assisted Injection Molding
- (2011) S. Zhang et al. INTERNATIONAL POLYMER PROCESSING
- The Influence of Melt and Process Parameters on the Quality and Occurrence of Part Defects in Water-assisted Injection Molded Tubes
- (2011) S. Sannen et al. INTERNATIONAL POLYMER PROCESSING
- Crystal Morphology of Water-Assisted Injection Molded High-Density Polyethylene with Two Different Molecular Weights
- (2011) Bin Wang et al. Journal of Macromolecular Science Part B-Physics
- Morphological comparison of isotactic polypropylene molded by water-assisted and conventional injection molding
- (2011) Xianhu Liu et al. JOURNAL OF MATERIALS SCIENCE
- Molecular dynamics simulation of bubble nucleation in Carbon Dioxide/Hexadecane Solution as an analog to foaming of polyethylene by Super Critical Carbon Dioxide
- (2011) Ming Zhai et al. JOURNAL OF PLASTIC FILM & SHEETING
- Morphologies of injection molded isotactic polypropylene/ultra high molecular weight polyethylene blends
- (2011) Yuan An et al. MATERIALS & DESIGN
- β-transcrystallinity developed from the novel ringed nuclei in the glass fiber/isotactic polypropylene composite
- (2011) Qingtao Li et al. MATERIALS LETTERS
- Model and simulation for melt flow in micro-injection molding based on the PTT model
- (2011) Wei Cao et al. MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING
- Formation mechanism of crystal morphologies in LLDPE/HDPE blends investigated via water-assisted and conventional injection molding
- (2011) Bin Wang et al. POLYMER ENGINEERING AND SCIENCE
- Transcrystallization behavior at the poly(lactic acid)/sisal fibre biocomposite interface
- (2010) Yaming Wang et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Morphology of Fluid Assisted Injection Molded Polycarbonate/Polyethylene Blends
- (2010) Kun-Yeh Lin et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Recent Advances in the Application of Natural Fiber Based Composites
- (2010) Jitendra K. Pandey et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Morphological development in water assisted injection molded polyethylene/polyamide-6 blends
- (2010) Shih-Jung Liu et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Using differential mold temperatures to improve the residual wall thickness uniformity around curved sections of fluid assisted injection molded tubes
- (2009) Kun-Yeh Lin et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- An Experimental Setup to Measure the Transient Temperature Profiles in Water Assisted Injection Molding
- (2009) S.-J. Liu et al. INTERNATIONAL POLYMER PROCESSING
- Water Assisted Injection Molding: A Review
- (2009) S.-J. Liu INTERNATIONAL POLYMER PROCESSING
- Simulation of Gas-Assisted Injection Molding of High-Density Polyethylene: The Role of Rheological Properties and Physical Fields on the Crystalline Morphology
- (2009) Sheng Hu et al. Journal of Macromolecular Science Part B-Physics
- The influence of processing parameters on fingering formation in fluid-assisted injection-molded disks
- (2009) Kun-Yeh Lin et al. POLYMER ENGINEERING AND SCIENCE
- Preliminary investigation on morphology in water-assisted injection molded polymer blends
- (2009) Han-Xiong Huang et al. POLYMER TESTING
- Gas-assisted Injection Molded Polypropylene/Glass Fiber Composite: Foaming Structure and Tensile Strength
- (2009) Guo-Qiang Zheng et al. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING
- Computational Modeling and Numerical Simulation of Flow-Induced Crystallization Kinetics During Injection Molding of Polyethylene Terephthalate
- (2008) Ying-Guo Zhou et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- An Experimental Study of the Water-Assisted Injection Molding of PA-6 Composites
- (2008) Shih-Jung Liu et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Water assisted injection moulding: development of insights and predictive capabilities through experiments on instrumented process in parallel with computer simulations
- (2008) A. Polynkin et al. PLASTICS RUBBER AND COMPOSITES
- Novel three-dimensional in-cavity transient temperature measurements in injection molding and fluid-assisted injection molding
- (2008) Shih-Jung Liu et al. POLYMER TESTING
- Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights
- (2007) S. Liang et al. ACTA MATERIALIA
- Effects and optimization of processing parameters in water-assisted injection molding
- (2007) Han-Xiong Huang et al. JOURNAL OF APPLIED POLYMER SCIENCE
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search