Shear-Induced Skin-Core Structure of Molten Isotactic Polypropylene and the Formation of β-Crystal

Effect of Flowing Preformed Spherulites on Shear-Induced Melt Crystallization Behaviors of Isotactic Polypropylene

(2018) Junyang Wang et al.   MACROMOLECULES

Abnormal crystallization behavior of high impact polypropylene under shear

(2018) Di Sun et al.   POLYMER

Self-reinforcing and toughening isotactic polypropylene via melt sequential injection molding

(2018) Jing Jiang et al.   POLYMER TESTING

Micromechanical analysis of molecular orientation in high-temperature creep of polycarbonate

(2018) Fei Luo et al.   MATERIALS & DESIGN

An Alternating Skin-Core Structure in Melt Multi-Injection-Molded Polyethylene

(2017) Xianhu Liu et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

A fast and high accuracy numerical simulation algorithm of the polymer spherulite at the mesoscale Level

(2017) Yongzhi Liu et al.   MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING

Transition from the hierarchical distribution to a homogeneous formation in injection molded isotactic polypropylene (iPP) with dynamic mold temperature control

(2017) Haibin Zhao et al.   POLYMER TESTING

Mechanical enhancement of melt-stretched β-nucleated isotactic polypropylene: The role of lamellar branching of β-crystal

(2017) Zhongzhu Liu et al.   POLYMER TESTING

Annealing Induced Mechanical Reinforcement of Injection Molded iPP Parts

(2016) Yamin Pan et al.   MACROMOLECULAR MATERIALS AND ENGINEERING

Quantification of the Effect of Shish-Kebab Structure on the Mechanical Properties of Polypropylene Samples by Controlling Shear Layer Thickness

(2016) Dashan Mi et al.   MACROMOLECULES

Twisted lamellae in water-assisted injection molded high density polyethylene

(2016) Xianhu Liu et al.   MATERIALS LETTERS

Electrically Conductive Polypropylene Nanocomposites with Negative Permittivity at Low Carbon Nanotube Loading Levels

(2015) Xi Zhang et al.   ACS Applied Materials & Interfaces

In-situ synchrotron X-ray studies of crystallization of β-nucleated iPP subjected to a wide range of shear rates and shear temperatures

(2015) J. Chen et al.   POLYMER

β-Nucleated Polypropylene: Processing, Properties and Nanocomposites

(2015) Dimitrios G. Papageorgiou et al.   Polymer Reviews

New insight into lamellar branching of β-nucleated isotactic polypropylene upon melt-stretching: WAXD and SAXS study

(2014) Zhongzhu Liu et al.   JOURNAL OF MATERIALS SCIENCE

Flame-Retardant Polypropylene/Multiwall Carbon Nanotube Nanocomposites: Effects of Surface Functionalization and Surfactant Molecular Weight

(2014) Qingliang He et al.   MACROMOLECULAR CHEMISTRY AND PHYSICS

Mapping the Electrical Conductivity of Poly(methyl methacrylate)/Carbon Black Composites Prior to and after Shear

(2013) Xianhu Liu et al.   ACS Applied Materials & Interfaces

Crystalline Structure of Injection Molded β-Isotactic Polypropylene: Analysis of the Oriented Shear Zone

(2013) Xianhu Liu et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Study of shear-induced interfacial crystallization in polymer-based composite through in situ monitoring interfacial shear stress

(2013) Bingbing Sun et al.   JOURNAL OF MATERIALS SCIENCE

Pre-shear induced anomalous distribution of β-form in injection molded iPP

(2013) Baobao Chang et al.   POLYMER TESTING

Towards balanced strength and toughness improvement of isotactic polypropylene nanocomposites by surface functionalized graphene oxide

(2013) Rui-Ying Bao et al.   Journal of Materials Chemistry A

β-Crystal in injection moulded poly(ethylene terephthalate) fibre/isotactic polypropylene composite

(2012) Caiqiao Ji et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Precursor of Shish-Kebab in Atactic Polystyrene/Isotactic Polystyrene Blend above Nominal Melting Temperature

(2012) Cong Deng et al.   MACROMOLECULES

Pressure Quench of Flow-Induced Crystallization Precursors

(2012) Zhe Ma et al.   MACROMOLECULES

Effect of Shear Stress on Crystallization of Isotactic Polypropylene from a Structured Melt

(2012) Bin Zhang et al.   MACROMOLECULES

Formation of Interlinked Shish-Kebabs in Injection-Molded Polyethylene under the Coexistence of Lightly Cross-Linked Chain Network and Oscillation Shear Flow

(2012) Hao-Ran Yang et al.   MACROMOLECULES

Enhanced orientation of the water-assisted injection-molded ipp in the presence of nucleating agent

(2012) Guo-Qiang Zheng et al.   POLYMER ENGINEERING AND SCIENCE

Unexpected molecular weight dependence of shish kebab in water-assisted injection molded HDPE

(2012) Xianhu Liu et al.   POLYMERS FOR ADVANCED TECHNOLOGIES

Morphological comparison of isotactic polypropylene molded by water-assisted and conventional injection molding

(2011) Xianhu Liu et al.   JOURNAL OF MATERIALS SCIENCE

β-transcrystallinity developed from the novel ringed nuclei in the glass fiber/isotactic polypropylene composite

(2011) Qingtao Li et al.   MATERIALS LETTERS

Model and simulation for melt flow in micro-injection molding based on the PTT model

(2011) Wei Cao et al.   MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING

Formation of β-cylindrites under supercooled extrusion of isotactic polypropylene at low shear stress

(2011) Bin Zhang et al.   POLYMER

Cylindritic structures of high-density polyethylene molded by multi-melt multi-injection molding

(2011) Kai Zhang et al.   POLYMER

Unusual Tuning of Mechanical Properties of Isotactic Polypropylene Using Counteraction of Shear Flow and β-Nucleating Agent on β-Form Nucleation

(2009) Yan-Hui Chen et al.   MACROMOLECULES

Structure–property relations in molded, nucleated isotactic polypropylene

(2009) Jan-Willem Housmans et al.   POLYMER