Sol–gel synthesis of nanosilica-coated para-aramid fibers and their application in the preparation of paper-based friction materials

Dielectric properties and thermal conductivity of core-shell structured Ni@NiO/poly(vinylidene fluoride) composites

(2017) Wenying Zhou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Toward high-performance poly(para-phenylene terephthalamide) (PPTA)-based composite paper via hot-pressing: the key role of partial fibrillation and surface activation

(2017) Zhaoqing Lu et al.   RSC Advances

In-situ pull-off of ZnO nanowire from carbon fiber and improvement of interlaminar toughness of hierarchical ZnO nanowire/carbon fiber hydrid composite laminates

(2016) Nan Zheng et al.   CARBON

Aramid/glass fiber-reinforced thermal break – thermal and structural performance

(2016) Kyriaki Goulouti et al.   COMPOSITE STRUCTURES

Friction and wear properties of friction materials containing nano/micro-sized SiO2particles

(2016) Kezban Banu Sugozu et al.   INDUSTRIAL LUBRICATION AND TRIBOLOGY

A flexible sandwiched graphite nanoplatelets/copper nanowires/graphite nanoplatelets paper with superior electrical conductivity

(2016) Xiaojuan Tian et al.   RSC Advances

Covalent modification of Aramid fibers' surface via direct fluorination to enhance composite interfacial properties

(2016) Zheng Cheng et al.   MATERIALS & DESIGN

Surface modification of aramid fiber by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions

(2015) C.X. Wang et al.   APPLIED SURFACE SCIENCE

Effect of carbon fiber content on the friction and wear performance of paper-based friction materials

(2015) Jie Fei et al.   TRIBOLOGY INTERNATIONAL

A highly thermostable and transparent lateral heat spreader based on silver nanowire/polyimide composite

(2015) Junpeng Li et al.   RSC Advances

Surface Modification of Aramid Fibers by Bio-Inspired Poly(dopamine) and Epoxy Functionalized Silane Grafting

(2014) Rina Sa et al.   ACS Applied Materials & Interfaces

Evaluation of reaction factors for deposition of silica (SiO2) nanoparticles on cellulose fibers

(2014) Joabel Raabe et al.   CARBOHYDRATE POLYMERS

Effects of carbon fiber length on the tribological properties of paper-based friction materials

(2014) Jie Fei et al.   TRIBOLOGY INTERNATIONAL

Parametric analysis for a paper-based wet clutch with groove consideration

(2014) M. Li et al.   TRIBOLOGY INTERNATIONAL

Mechanochemical synthesis of amorphous silicon nanoparticles

(2014) Anna-Lisa Chaudhary et al.   RSC Advances

Simultaneously improving the tensile strength and modulus of aramid fiber by enhancing amorphous phase in supercritical carbon dioxide

(2014) Haijuan Kong et al.   RSC Advances

Effect of surface modification of bamboo cellulose fibers on mechanical properties of cellulose/epoxy composites

(2013) Tingju Lu et al.   COMPOSITES PART B-ENGINEERING

On the optimum groove shapes for load-carrying capacity enhancement in parallel flat surface bearings: Theory and experiment

(2013) M. Fesanghary et al.   TRIBOLOGY INTERNATIONAL

The Effect of Spherical Silica Powder on the Tribological Behavior of Phenolic Resin–Based Friction Materials

(2013) Hongyun Jin et al.   TRIBOLOGY LETTERS

Processing and dimensional changes of cement based composites reinforced with surface-treated cellulose fibres

(2012) G.H.D. Tonoli et al.   CEMENT & CONCRETE COMPOSITES

Separation of ethylene/ethane and propylene/propane by cellulose acetate–silica nanocomposite membranes

(2012) Mahdi Naghsh et al.   JOURNAL OF MEMBRANE SCIENCE

Surface treatment of aramid fiber by air dielectric barrier discharge plasma at atmospheric pressure

(2010) Caixia Jia et al.   APPLIED SURFACE SCIENCE

Improving thermal conductivity while retaining high electrical resistivity of epoxy composites by incorporating silica-coated multi-walled carbon nanotubes

(2010) Wei Cui et al.   CARBON

Organic–inorganic nanocomposite polymer electrolyte membranes for fuel cell applications

(2010) Bijay P. Tripathi et al.   PROGRESS IN POLYMER SCIENCE

Comparison of F-12 aramid fiber with domestic armid fiber III on surface feature

(2009) Shu-hui Zhang et al.   APPLIED SURFACE SCIENCE

Synthesis and characterization of cellulose/silica hybrid materials with chemical crosslinking

(2009) Kongliang Xie et al.   CARBOHYDRATE POLYMERS

Preparation of spherical silica particles by St?ber process with high concentration of tetra-ethyl-orthosilicate

(2009) Xiao-Dong Wang et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

A facile method to fabricate silica-coated carbon nanotubes and silica nanotubes from carbon nanotubes templates

(2009) Yingkui Yang et al.   JOURNAL OF MATERIALS SCIENCE

High-performance aromatic polyamides

(2009) José M. García et al.   PROGRESS IN POLYMER SCIENCE

Interface correlation and toughness matching of phosphoric acid functionalized Kevlar fiber and epoxy matrix for filament winding composites

(2008) Gang Li et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Surface modification of aramid fiber by air DBD plasma at atmospheric pressure with continuous on-line processing

(2008) Min Xi et al.   SURFACE & COATINGS TECHNOLOGY

Ultrasonic treatment of aramid fiber surface and its effect on the interface of aramid/epoxy composites

(2007) L. Liu et al.   APPLIED SURFACE SCIENCE

Effects of γ-ray radiation grafting on aramid fibers and its composites

(2007) Y.H. Zhang et al.   APPLIED SURFACE SCIENCE

Novel SiO2/cellulose nanocomposites obtained by in situ synthesis and via polyelectrolytes assembly

(2007) Ricardo J.B. Pinto et al.   COMPOSITES SCIENCE AND TECHNOLOGY