Toward high-performance poly(para-phenylene terephthalamide) (PPTA)-based composite paper via hot-pressing: the key role of partial fibrillation and surface activation

Tailoring the crystalline morphology and mechanical property of olefin block copolymer via blending with a small amount of UHMWPE

(2017) Yongsheng Zhao et al.   POLYMER

A numerical simulation of acoustic field within liquids subject to three orthogonal ultrasounds

(2017) W. Zhai et al.   ULTRASONICS SONOCHEMISTRY

Role of surface chemistry in modified ACF (activated carbon fiber)-catalyzed peroxymonosulfate oxidation

(2016) Shiying Yang et al.   APPLIED SURFACE SCIENCE

Surface chain cleavage behavior of PBIA fiber induced by direct fluorination

(2016) Zheng Cheng et al.   APPLIED SURFACE SCIENCE

WITHDRAWN: Ex-situ toughness and damping research of co-cured bismaleimide matrix composite with aramid nonwoven fabrics

(2016) Nannan Ni et al.   COMPOSITES PART B-ENGINEERING

Synthesis of Cyanate Ester Microcapsules via Solvent Evaporation Technique and Its Application in Epoxy Resins as a Healing Agent

(2016) Junwei Gu et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Functionalized graphite nanoplatelets/epoxy resin nanocomposites with high thermal conductivity

(2016) Junwei Gu et al.   INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER

Direct fluorination of para-aramid fibers 1: Fluorination reaction process of PPTA fiber

(2016) Longbo Luo et al.   JOURNAL OF FLUORINE CHEMISTRY

Dielectric properties of paper-based composites at microwave frequency

(2016) Yao Sun et al.   TEXTILE RESEARCH JOURNAL

In situ synchrotron small- and wide-angle X-ray study on the structural evolution of Kevlar fiber under uniaxial stretching

(2016) Xiaoyun Li et al.   RSC Advances

Covalent modification of Aramid fibers' surface via direct fluorination to enhance composite interfacial properties

(2016) Zheng Cheng et al.   MATERIALS & DESIGN

Surface structural evolvement in the conversion of polyacrylonitrile precursors to carbon fibers

(2015) Xin Qian et al.   APPLIED SURFACE SCIENCE

Surface modification of aramid fiber by plasma induced vapor phase graft polymerization of acrylic acid. I. Influence of plasma conditions

(2015) C.X. Wang et al.   APPLIED SURFACE SCIENCE

Vacuum-bag-only co-bonding prepreg skins to aramid honeycomb core. Part II. In-situ core pressure response using embedded sensors

(2015) James Kratz et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal substrates with different surface morphology

(2015) Zhi Sun et al.   COMPOSITES PART B-ENGINEERING

Enhanced interfacial properties of domestic aramid fiber-12 via high energy gamma ray irradiation

(2015) Lixin Xing et al.   COMPOSITES PART B-ENGINEERING

Study of the relationship between characteristics of aramid fibrids and mechanical property of aramid paper using DSC

(2014) Huifang Zhao et al.   E-POLYMERS

The application of gas plasma technologies in surface modification of aramid fiber

(2014) Youyi Sun et al.   FIBERS AND POLYMERS

The effect of atmospheric-pressure air plasma discharge power on adhesive properties of aramid fibers

(2014) Caixia Jia et al.   POLYMER COMPOSITES

Surface modification of aramid fibers by atmospheric pressure plasma-enhanced vapor deposition

(2014) Yanyan Chu et al.   TEXTILE RESEARCH JOURNAL

Effects of different fluorination routes on aramid fiber surface structures and interlaminar shear strength of its composites

(2013) Jie Gao et al.   APPLIED SURFACE SCIENCE

Effect of surface treatment on the structure and properties of para-aramid fibers by phosphoric acid

(2013) Jia Zhao   FIBERS AND POLYMERS

Graphene–aramid nanofiber nanocomposite paper with high mechanical and electrical performance

(2013) Jinchen Fan et al.   RSC Advances

Statistical analysis of PPTA fiber strengths measured under high strain rate condition

(2012) Jae Hyun Kim et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Fabrication of meta-aramid fibrid by precipitation

(2012) Lirong Yao et al.   FIBERS AND POLYMERS

Influence of Fiber Characteristics and Manufacturing Process on the Structure and Properties of Aramid Paper

(2012) Huifang Zhao et al.   POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING

Analytical modeling of strength in randomly oriented PP and PPTA short fiber reinforced gypsum composites

(2011) Jamshid Aghazadeh Mohandesi et al.   COMPUTATIONAL MATERIALS SCIENCE

Activated carbon fibers with a high content of surface functional groups by phosphoric acid activation of PPTA

(2011) Alberto Castro-Muñiz et al.   JOURNAL OF COLLOID AND INTERFACE SCIENCE

All-Aramid Composites by Partial Fiber Dissolution

(2010) Jian Min Zhang et al.   ACS Applied Materials & Interfaces

Effects of gage length, loading rates, and damage on the strength of PPTA fibers

(2010) Jaeyoung Lim et al.   INTERNATIONAL JOURNAL OF IMPACT ENGINEERING

Filament-Level Modeling of Aramid-Based High-Performance Structural Materials

(2010) M. Grujicic et al.   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE

Adhesion force between aramid fibre and aramid fibrid by AFM

(2010) Sufeng Zhang et al.   POLYMER BULLETIN

Effects of atmospheric plasma activation on surface properties of pigment-coated and surface-sized papers

(2008) Maiju Pykönen et al.   APPLIED SURFACE SCIENCE