标题
Review of the modeling approaches of phase change processes
作者
关键词
-
出版物
RENEWABLE & SUSTAINABLE ENERGY REVIEWS
Volume 187, Issue -, Pages 113724
出版商
Elsevier BV
发表日期
2023-09-12
DOI
10.1016/j.rser.2023.113724
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Effect of the cooling clothing integrating with phase change material on the thermal comfort of healthcare workers with personal protective equipment during the COVID-19
- (2023) Chenxi Hu et al. Case Studies in Thermal Engineering
- Review of solidification and melting performance of phase change materials in the presence of magnetic field, rotation, tilt angle, and vibration
- (2023) Farhan Lafta Rashid et al. Journal of Energy Storage
- Experimental assessment of a greenhouse with and without PCM thermal storage energy and prediction their thermal behavior using machine learning algorithms
- (2023) A. Badji et al. Journal of Energy Storage
- Melting performance of nano-enhanced phase change materials in a triple-tube heat exchanger with zigzag-shaped tubes
- (2023) Mohamed Boujelbene et al. Journal of Energy Storage
- Numerical evaluation of convective heat transfer properties of two-dimensional rotating PCM melt in the unilaterally heated rectangular container
- (2022) Dinghai Liu et al. RENEWABLE ENERGY
- Solidification of a nano-enhanced phase change material (NePCM) in a double elliptical latent heat storage unit with wavy inner tubes
- (2022) Mehdi Eisapour et al. SOLAR ENERGY
- Heat transfer enhancement of phase change materials embedded with metal foam for thermal energy storage: A review
- (2022) Wei Cui et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- A hybrid photovoltaic and water/air based thermal(PVT) solar energy collector with integrated PCM for building application
- (2022) Jianhui Li et al. RENEWABLE ENERGY
- Effect of Mushy Zone Parameter on Phase Change Behavior of Different Configurations Storage Unit: Numerical Simulation and Experimental Validation
- (2022) Ahmed Saad Soliman et al. Sustainability
- Numerical Study of an Evacuated Tube Solar Collector Incorporating a Nano-PCM as a Latent Heat Storage System
- (2021) Raja Elarem et al. Case Studies in Thermal Engineering
- Review of preparation technologies of organic composite phase change materials in energy storage
- (2021) Yinxu Zhao et al. JOURNAL OF MOLECULAR LIQUIDS
- A finite-element toolbox for the simulation of solid–liquid phase-change systems with natural convection
- (2020) Aina Rakotondrandisa et al. COMPUTER PHYSICS COMMUNICATIONS
- Parametric investigation of the enhancing effects of finned tubes on the solidification of PCM
- (2020) Felipe S dos Santos et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Natural convection flow of a suspension containing nano-encapsulated phase change particles in an eccentric annulus
- (2020) S.A.M. Mehryan et al. Journal of Energy Storage
- Apparent heat capacity method to investigate heat transfer in a composite phase change material
- (2020) Y. Khattari et al. Journal of Energy Storage
- Forced convection heat transfer of Nano-Encapsulated Phase Change Material (NEPCM) suspension in a mini-channel heatsink
- (2020) C.J. Ho et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Development of composite phase change cold storage material and its application in vaccine cold storage equipment
- (2020) Yi Zhao et al. Journal of Energy Storage
- Building bricks with phase change material (PCM): Thermal performances
- (2020) Mustapha Mahdaoui et al. CONSTRUCTION AND BUILDING MATERIALS
- Nano-enhanced phase change materials and fluids in energy applications: A review
- (2020) Sandro Nižetić et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Supercooling of phase-change materials and the techniques used to mitigate the phenomenon
- (2019) Md. Hasan Zahir et al. APPLIED ENERGY
- Natural convective flow and heat transfer of Nano-Encapsulated Phase Change Materials (NEPCMs) in a cavity
- (2019) Mohammad Ghalambaz et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins
- (2019) Chengbin Zhang et al. APPLIED ENERGY
- Modified computational methods using effective heat capacity model for the thermal evaluation of PCM outfitted walls
- (2019) Yuan Zhang INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Microstructural evolution within mushy zone during paraffin’s melting and solidification
- (2019) Bei Yang et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Thermal management of electronic devices and concentrator photovoltaic systems using phase change material heat sinks: Experimental investigations
- (2019) Mohamed Emam et al. RENEWABLE ENERGY
- Thermal performance difference of phase change energy storage units based on tubular macro-encapsulation
- (2019) GuoHui Feng et al. Sustainable Cities and Society
- Analysis of a phase change material-based unit and of an aluminum foam/phase change material composite-based unit for cold thermal energy storage by numerical simulation
- (2019) Martina Caliano et al. APPLIED ENERGY
- Calculation of transient phase change heat transfer through building envelopes: An improved enthalpy model and error analysis
- (2019) Yuan Zhang et al. ENERGY AND BUILDINGS
- Thermal characterization of a heat exchanger equipped with a combined material of phase change material and metallic foams
- (2019) Ratiba Sabrina Ferfera et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- The influence of channels per square inch on the freezing progress of the square copper column array water composite PCM
- (2019) Zhaolei Ding et al. Journal of Energy Storage
- Investigation of PCM charging for the energy saving of domestic hot water system
- (2018) Majid Gorzin et al. APPLIED THERMAL ENGINEERING
- Comparison of two numerical heat transfer models for phase change material board
- (2018) Xing Jin et al. APPLIED THERMAL ENGINEERING
- A numerical study of adaptive building enclosure systems using solid–solid phase change materials with variable transparency
- (2018) Gert Guldentops et al. ENERGY AND BUILDINGS
- Thermal performance of copper foam/paraffin composite phase change material
- (2018) Huanpei Zheng et al. ENERGY CONVERSION AND MANAGEMENT
- Investigation of solid-liquid phase change in the spherical capsule using axisymmetric lattice Boltzmann model
- (2018) Yutao Huo et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Theoretical and numerical analysis on phase change materials (PCM): A case study of the solidification process of erythritol in spheres
- (2018) J.H. Nazzi Ehms et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Equivalent heat source approach in a 3D transient heat transfer simulation of full-penetration high power laser beam welding of thick metal plates
- (2018) Antoni Artinov et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Review on thermal conductivity enhancement, thermal properties and applications of phase change materials in thermal energy storage
- (2018) Yaxue Lin et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Experimental validation of a high-temperature solar box cooker with a solar-salt-based thermal storage unit
- (2018) Gianluca Coccia et al. SOLAR ENERGY
- Simulation research on the dynamic thermal performance of a novel triple-glazed window filled with PCM
- (2018) Shuhong Li et al. Sustainable Cities and Society
- Comparison of direct numerical simulation with volume-averaged method on composite phase change materials for thermal energy storage
- (2018) Xiaohu Yang et al. APPLIED ENERGY
- CFD simulation of a TES tank comprising a PCM encapsulated in sphere with heat transfer enhancement
- (2018) S. Aziz et al. APPLIED THERMAL ENGINEERING
- Literature review on pressure–velocity decoupling algorithms applied to built-environment CFD simulation
- (2018) Haidong Wang et al. BUILDING AND ENVIRONMENT
- Development of paraffin wax as phase change material based latent heat storage in heat exchanger
- (2018) Ruslan Sabah Abdulrahman et al. APPLIED THERMAL ENGINEERING
- Novel strategies and supporting materials applied to shape-stabilize organic phase change materials for thermal energy storage–A review
- (2018) Malik Muhammad Umair et al. APPLIED ENERGY
- Dynamic thermal management for industrial waste heat recovery based on phase change material thermal storage
- (2018) Dacheng Li et al. APPLIED ENERGY
- Numerical Analysis of Shell-and-Tube Type Latent Thermal Energy Storage Performance with Different Arrangements of Circular Fins
- (2017) Sebastian Kuboth et al. Energies
- Numerical investigation of a triplex tube heat exchanger with phase change material: Simultaneous charging and discharging
- (2017) Mahmood Mastani Joybari et al. ENERGY AND BUILDINGS
- Heat pipe with nano enhanced-PCM for electronic cooling application
- (2017) Jogi Krishna et al. EXPERIMENTAL THERMAL AND FLUID SCIENCE
- Melting of nanoparticle-enhanced paraffin wax in a rectangular enclosure with partially active walls
- (2017) Müslüm Arıcı et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Numerical study on melt fraction during melting of phase change material inside a sphere
- (2017) Wei Li et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
- Numerical method and model for calculating thermal storage time for an annular tube with phase change material
- (2017) Fan-han Liu et al. Journal of Central South University
- Heat transfer enhancement in latent heat thermal storage systems: Comparative study of different solutions and thermal contact investigation between the exchanger and the PCM
- (2016) Kevin Merlin et al. APPLIED ENERGY
- CFD analysis of melting process in a shell-and-tube latent heat storage for concentrated solar power plants
- (2016) F. Fornarelli et al. APPLIED ENERGY
- Industrial waste heat recovery using an enhanced conductivity latent heat thermal energy storage
- (2016) Kevin Merlin et al. APPLIED ENERGY
- Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high-temperature thermal energy storage
- (2016) Ryo Fukahori et al. APPLIED ENERGY
- Natural convection in high temperature flat plate latent heat thermal energy storage systems
- (2016) J. Vogel et al. APPLIED ENERGY
- Lattice Boltzmann simulation on phase change heat transfer in metal foams/paraffin composite phase change material
- (2016) Y.B. Tao et al. APPLIED THERMAL ENGINEERING
- Self-assembly fabrication of microencapsulated n-octadecane with natural silk fibroin shell for thermal-regulating textiles
- (2016) Liang Zhao et al. APPLIED THERMAL ENGINEERING
- Thermal performance analysis of PCM in refrigerated container envelopes in the Italian context – Numerical modeling and validation
- (2016) Benedetta Copertaro et al. APPLIED THERMAL ENGINEERING
- Numerical analysis of discharging process acceleration in LHTESS by immersing innovative fin configuration using finite element method
- (2016) Mohsen Sheikholeslami et al. APPLIED THERMAL ENGINEERING
- Experimental and numerical studies of hybrid PCM embedded in plastering mortar for enhanced thermal behaviour of buildings
- (2016) Mohammad Kheradmand et al. ENERGY
- Numerical analysis on thermal performance of a PCM-filled double glazing roof
- (2016) Changyu Liu et al. ENERGY AND BUILDINGS
- A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility
- (2016) Zakir Khan et al. ENERGY CONVERSION AND MANAGEMENT
- On the integral-balance approach to the transient heat conduction with linearly temperature-dependent thermal diffusivity
- (2016) Antoine Fabre et al. HEAT AND MASS TRANSFER
- Numerical investigation on the melting of circular finned PCM system using CFD & full factorial design
- (2016) Uk-Hee Jung et al. Journal of Mechanical Science and Technology
- A review on thermal conductivity enhancement of paraffinwax as latent heat energy storage material
- (2016) Prabhu Bose et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Validation of a CFD model for the simulation of heat transfer in a tubes-in-tank PCM storage unit
- (2016) Yosr Allouche et al. RENEWABLE ENERGY
- Heat transfer in concentrated solar air-heaters filled with a porous medium with radiation effects: A perturbation solution
- (2016) Milad Tajik Jamal-Abad et al. RENEWABLE ENERGY
- Analysis of the effect of eccentricity and operational parameters in PCM-filled single-pass shell and tube heat exchangers
- (2016) Younes Pahamli et al. RENEWABLE ENERGY
- Effect of thermal conductivities of shape stabilized PCM on under-floor heating system
- (2015) Wenlong Cheng et al. APPLIED ENERGY
- Modeling and simulation of a phase change material system for improving summer comfort in domestic residence
- (2015) Julien Borderon et al. APPLIED ENERGY
- Maximization of performance of a PCM latent heat storage system with innovative fins
- (2015) A. Sciacovelli et al. APPLIED ENERGY
- Numerical investigation of heat transfer mechanism in a vertical shell and tube latent heat energy storage system
- (2015) Saeid Seddegh et al. APPLIED THERMAL ENGINEERING
- Numerical analysis of a novel ground heat exchanger coupled with phase change materials
- (2015) Michele Bottarelli et al. APPLIED THERMAL ENGINEERING
- Review of phase change emulsions (PCMEs) and their applications in HVAC systems
- (2015) Jingjing Shao et al. ENERGY AND BUILDINGS
- Numerical modeling of thermal behaviors of active multi-layer living wall
- (2015) Mohamed El Mankibi et al. ENERGY AND BUILDINGS
- Simulation study on dynamic heat transfer performance of PCM-filled glass window with different thermophysical parameters of phase change material
- (2015) Kecheng Zhong et al. ENERGY AND BUILDINGS
- STUDY ON SOLIDIFICATION OF PHASE CHANGE MATERIAL IN FRACTAL POROUS METAL FOAM
- (2015) CHENGBIN ZHANG et al. FRACTALS-COMPLEX GEOMETRY PATTERNS AND SCALING IN NATURE AND SOCIETY
- Heat transfer study of submicro-encapsulated PCM plate for food packaging application
- (2015) H.M. Hoang et al. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- Phase change material for the thermal protection of ice cream during storage and transportation
- (2015) D. Leducq et al. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- The thermal protection and comfort properties of aerogel and PCM-coated fabric for firefighter garment
- (2015) Abu Shaid et al. Journal of Industrial Textiles
- Enhanced heat transfer for PCM melting in the frustum-shaped unit with multiple PCMs
- (2015) Zhipei Hu et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Study on heat-storage and release characteristics of multi-cavity-structured phase-change microcapsules
- (2015) Peng Han et al. PHASE TRANSITIONS
- Effect of internal void placement on the heat transfer performance – Encapsulated phase change material for energy storage
- (2015) Laura Solomon et al. RENEWABLE ENERGY
- Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard
- (2014) Kaushik Biswas et al. APPLIED ENERGY
- Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex tube heat exchangers
- (2013) Abduljalil A. Al-Abidi et al. APPLIED THERMAL ENGINEERING
- Analysis of heat transfer and fluid flow during melting inside a spherical container for thermal energy storage
- (2013) Antonio Ramos Archibold et al. APPLIED THERMAL ENGINEERING
- Experimental and numerical investigations of the optical and thermal aspects of a PCM-glazed unit
- (2013) B.L. Gowreesunker et al. ENERGY AND BUILDINGS
- Phase change material for enhancing solar water heater, an experimental approach
- (2013) Mohammad Ali Fazilati et al. ENERGY CONVERSION AND MANAGEMENT
- Parametric studies on packed bed storage unit filled with PCM encapsulated spherical containers for low temperature solar air heating applications
- (2013) S. Karthikeyan et al. ENERGY CONVERSION AND MANAGEMENT
- Modeling of Thermal Energy Storage Shell-and-Tube Heat Exchanger
- (2013) Andrew J. Parry et al. HEAT TRANSFER ENGINEERING
- Experimental and computational evolution of a shell and tube heat exchanger as a PCM thermal storage system
- (2013) M.J. Hosseini et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- Experimental and numerical investigation of melting of phase change material/nanoparticle suspensions in a square container subjected to a constant heat flux
- (2013) Nabeel S. Dhaidan et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins
- (2013) Abduljalil A. Al-Abidi et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- Comparison of effects on technical variances of computational fluid dynamics (CFD) software based on finite element and finite volume methods
- (2013) Woowon Jeong et al. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- CFD applications for latent heat thermal energy storage: a review
- (2013) Abduljalil A. Al-abidi et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Numerical evaluation of a triple concentric-tube latent heat thermal energy storage
- (2013) Birol Başal et al. SOLAR ENERGY
- Solidification of nano-enhanced phase change material (NEPCM) in a wavy cavity
- (2012) S. Kashani et al. HEAT AND MASS TRANSFER
- A combined experimental and computational study on the melting behavior of a medium temperature phase change storage material inside shell and tube heat exchanger
- (2012) M.J. Hosseini et al. INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
- A review on effect of phase change material encapsulation on the thermal performance of a system
- (2012) Pramod B. Salunkhe et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Thermal stability of phase change materials used in latent heat energy storage systems: A review
- (2012) Manish K. Rathod et al. RENEWABLE & SUSTAINABLE ENERGY REVIEWS
- Numerical performance study of paraffin wax dispersed with alumina in a concentric pipe latent heat storage system
- (2012) Arasu Valan et al. Thermal Science
- Numerical analysis of melting of nano-enhanced phase change material in latent heat thermal energy storage system
- (2012) Sina Kashani et al. Thermal Science
- Numerical study of melting inside concentric and eccentric horizontal annulus
- (2011) AhmadAli Rabienataj Darzi et al. APPLIED MATHEMATICAL MODELLING
- Thermal analysis of a double layer phase change material floor
- (2011) Xing Jin et al. APPLIED THERMAL ENGINEERING
- Thermal analysis of including phase change material in a domestic hot water cylinder
- (2011) A. de Gracia et al. APPLIED THERMAL ENGINEERING
- Discharging characteristics modeling of cool thermal energy storage system with coil pipes using n-tetradecane as phase change material
- (2011) Shuangmao Wu et al. APPLIED THERMAL ENGINEERING
- Numerical investigations of unconstrained melting of nano-enhanced phase change material (NEPCM) inside a spherical container
- (2011) S.F. Hosseinizadeh et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- An efficient algorithm for phase change problem in tumor treatment using αFEM
- (2010) Eric Li et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- Waste heat transportation system, using phase change material (PCM) from steelworks to chemical plant
- (2010) Takahiro Nomura et al. RESOURCES CONSERVATION AND RECYCLING
- Cooling of portable hand-held electronic devices using phase change materials in finned heat sinks
- (2009) S.C. Fok et al. INTERNATIONAL JOURNAL OF THERMAL SCIENCES
- An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigation
- (2009) A. Felix Regin et al. RENEWABLE ENERGY
- Phase Change Material for Thermotherapy of Buruli Ulcer: A Prospective Observational Single Centre Proof-of-Principle Trial
- (2009) Thomas Junghanss et al. PLoS Neglected Tropical Diseases
- Approximate solution methods for one-dimensional solidification from an incoming fluid
- (2008) S.L. Mitchell et al. APPLIED MATHEMATICS AND COMPUTATION
- A solidification process with free convection of water in an elliptical enclosure
- (2008) Esam M. Alawadhi ENERGY CONVERSION AND MANAGEMENT
- Bread baking as a moving boundary problem. Part 1: Mathematical modelling
- (2008) Emmanuel Purlis et al. JOURNAL OF FOOD ENGINEERING
- Validity of the permeability Carman–Kozeny equation: A volume averaging approach
- (2008) Francisco J. Valdes-Parada et al. PHYSICA A-STATISTICAL MECHANICS AND ITS APPLICATIONS
- Temperature reduction due to the application of phase change materials
- (2007) Conrad Voelker et al. ENERGY AND BUILDINGS
- Energy and exergy analysis of a latent heat storage system with phase change material for a solar collector
- (2007) Ahmet Koca et al. RENEWABLE ENERGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationFind the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
Search