Effect of Volume Fraction of Ti on Microstructure Evolution and Thermal Properties of Al/Ti Laminated Composites

Improving the interlaminar bonding and thermal conductivity of polymer composites by using split-radial mesophase pitch-based carbon fiber as reinforcement

(2023) Ningyuan Zhang et al.   COMPOSITES PART B-ENGINEERING

Deformation characterization method of typical double-walled turbine blade structure during casting process

(2023) Yi-wei Dong et al.   JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL

High‐entropy rare earth titanates with low thermal conductivity designed by lattice distortion

(2023) Saisai Zhu et al.   JOURNAL OF THE AMERICAN CERAMIC SOCIETY

Promoting bonding strength between internal Al-Si based gradient coating and aluminum alloy cylinder bore by forming homo-epitaxial growth interface

(2023) Guo-zheng Ma et al.   MATERIALS & DESIGN

Microstructure, Mechanical and Thermal Properties of Al/Cu/SiC Laminated Composites, Fabricated by the ARB and CARB Processes

(2023) Jie Luo et al.   Crystals

Investigating the deformation behavior of hot-pressed Ti/Al/Ti laminated composite

(2023) Amir Hossein Assari   Journal of Manufacturing Processes

Iron doped Gd2Zr2O7 hierarchical nanoflakes arrays as robust electrodes materials for energy storage application

(2023) Shakoor Ahmad et al.   Journal of Energy Storage

Modeling thermal conductivity of nanofluids using advanced correlative approaches: Group method of data handling and gene expression programming

(2022) Fahimeh Hadavimoghaddam et al.   INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER

Review on developments of bulk functionally graded composite materials

(2022) Munagala Sai Charan et al.   INTERNATIONAL MATERIALS REVIEWS

Thermoelastic contact problem of a rigid punch sliding on a functionally graded piezoelectric layered half plane with heat generation

(2022) İsa Çömez et al.   JOURNAL OF THERMAL STRESSES

Dynamic Recrystallization Behaviors and the Texture Evolution in Mg–9Al–1Zn Alloy Produced by ECAP at Different Temperatures

(2022) Jintong Chen et al.   METALS AND MATERIALS INTERNATIONAL

Electrical, Thermal, and Mechanical Characterization of Hot Coined Carbon Fiber Reinforced Pure Aluminium Composites

(2022) Mostafa Eid et al.   METALS AND MATERIALS INTERNATIONAL

Effects of ZrB2 Nanoparticles on the Microstructures and Tensile Properties of a Hot Extruded In Situ AA6111 Composite

(2022) Ran Tao et al.   METALS AND MATERIALS INTERNATIONAL

Heat transfer, pressure drop, and economic analysis of a tube with a constant temperature equipped with semi-circular and teardrop-shaped turbulators

(2022) Yuan Fang et al.   Case Studies in Thermal Engineering

Heat transfer characteristics in discontinuous silicon carbide-reinforced aluminum multiphase composites containing nano-graphene additives: a micromechanics-based multistep technique

(2022) Mohammad Kazem Hassanzadeh-Aghdam et al.   Journal of the Brazilian Society of Mechanical Sciences and Engineering

Comprehensive review on exergy analysis of shell and tube heat exchangers

(2022) M. M. Rashidi et al.   JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY

Microstructure evolution and deformation behavior during stretching of a compositionally inhomogeneous TWIP-TRIP cantor-like alloy by laser powder deposition

(2022) J.X. Fang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Heat Transfer Analysis of Nanofluid Flow in a Rotating System with Magnetic Field Using an Intelligent Strength Stochastic-Driven Approach

(2022) Kamsing Nonlaopon et al.   Nanomaterials

Thermal management of a battery pack using a layer of phase change material around the batteries: Changes in the airflow through the battery

(2022) Mohammed N. Ajour et al.   Journal of Energy Storage

Evaluations on effect of volume fraction of injected air on exergo-economic performance of a shell and tube heat exchanger

(2022) Xinchun Zhou et al.   Case Studies in Thermal Engineering

Dislocation motion in plastic deformation of nano polycrystalline metal materials: a phase field crystal method study

(2022) Yuhong Zhao et al.   Advanced Composites and Hybrid Materials

The compositional homogenization control of Cu-Ti alloys prepared by accumulative roll bonding-deformation diffusion process

(2022) Yingming Tu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Metal-organic frameworks (MOF) based heat transfer: A comprehensive review

(2022) Mehdi Moayed Mohseni et al.   CHEMICAL ENGINEERING JOURNAL

Continuous and discontinuous contact problems of a functionally graded piezoelectric layer resting on a homogeneous piezoelectric half plane

(2022) İsa Çömez et al.   MECHANICS OF ADVANCED MATERIALS AND STRUCTURES

Uniformly dispersed flowery EuZrSe3 derived from the europium-based metal–organic framework for energy storage devices

(2022) Abdul Ghafoor Abid et al.   FUEL

Numerical thermal storage analysis within discharging involving nanomaterial

(2022) Nidal H. Abu-Hamdeh et al.   Journal of Energy Storage

Effects of Electric Current on the Plastic Deformation Behavior of Pure Copper, Iron, and Titanium

(2021) C. Rudolf et al.   ACTA MATERIALIA

Effect of heat input on interfacial characterization of the butter joint of hot-rolling CP-Ti/Q235 bimetallic sheets by Laser + CMT

(2021) Z. Y. Zhu et al.   Scientific Reports

Microstructure and mechanical properties of dissimilar NiTi/Ti6Al4V joints via back-heating assisted friction stir welding

(2021) Huaibo Deng et al.   Journal of Manufacturing Processes

Fabrication of Al–Ti–B Grain Refiner Using Machining Ti Chips, Reaction Mechanisms and Grain Refinement Performance in Pure Al

(2021) Maoliang Hu et al.   METALS AND MATERIALS INTERNATIONAL

Effect of volume fraction and size of Al2O3 nanoparticles in thermal, frictional and economic performance of circumferential corrugated helical tube

(2021) Haoran Wei et al.   Case Studies in Thermal Engineering

UFSW tool pin profile effects on properties of aluminium-steel joint

(2021) Xinli Xu et al.   VACUUM

An insight into thermal properties of BC3-graphene hetero-nanosheets: a molecular dynamics study

(2021) Maryam Zarghami Dehaghani et al.   Scientific Reports

Thermophysical Properties of Hybrid Nanofluids and the Proposed Models: An Updated Comprehensive Study

(2021) Mohammad M. Rashidi et al.   Nanomaterials

Evolution of microstructures and properties leading to layer instabilities during accumulative roll bonding of Fe Cu, Fe Ag, and Fe Al

(2021) Rodney J. McCabe et al.   MATERIALS & DESIGN

Applications of Thermal Energy Storage in Solar Organic Rankine Cycles: A Comprehensive Review

(2021) Mohamed Salem et al.   Frontiers in Energy Research

Advances in additive manufacturing of metal-based functionally graded materials

(2020) Ashley Reichardt et al.   INTERNATIONAL MATERIALS REVIEWS

Review on Vibration Analysis of Functionally Graded Material Structural Components with Cracks

(2020) Gourav Prasad Sinha et al.   Journal of Vibration Engineering & Technologies

The role of shear strain during Accumulative Roll-Bonding of multilayered composite sheets: Pattern formation, microstructure and texture evolution

(2020) Danielle Cristina Camilo Magalhães et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Developing a hybrid Al–SiC-graphite functionally graded composite material for optimum composition and mechanical properties

(2020) Meet Jaydeepkumar Oza et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of post-weld heat treatment on the microstructure and mechanical properties of laser-welded NiTi/304SS joint with Ni filler

(2019) Yuhua Chen et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Role of layered structure in ductility improvement of layered Ti-Al metal composite

(2018) Meng Huang et al.   ACTA MATERIALIA

Effect of elastic modulus mismatch of epoxy/titanium dioxide coated silver nanowire composites on the performance of thermal conductivity

(2018) Yunliang Jiang et al.   COMPOSITES SCIENCE AND TECHNOLOGY

Effect of pre-annealing deformation on the recrystallized texture and grain boundary misorientation in commercial pure titanium

(2018) Ying Wang et al.   MATERIALS CHARACTERIZATION

On the flexural and vibration behavior of imperfection sensitive higher order functionally graded material skew sandwich plates in thermal environment

(2018) Sanjay Singh Tomar et al.   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE

Thermal properties of graphene/metal composites with aligned graphene

(2018) Ke Chu et al.   MATERIALS & DESIGN

Application of the thermodynamic extremal principle to diffusion-controlled phase transformations in Fe-C-X alloys: Modeling and applications

(2018) Wangwang Kuang et al.   ACTA MATERIALIA

Microstructure, Texture, and Mechanical Properties of Laminar Metal Composites Produced by Accumulative Roll Bonding

(2018) Juliane Scharnweber et al.   ADVANCED ENGINEERING MATERIALS

The effect of pre-annealing on defects, microstructure and recrystallization of ultra-fine grained Al produced by high-pressure torsion

(2017) Mehrnoosh Naderi et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads

(2017) Dagmara Malgorzata Fronczek et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Interface-induced phenomena in magnetism

(2017) Frances Hellman et al.   REVIEWS OF MODERN PHYSICS

Al-Ti Particulate Composite: Processing and Studies on Particle Twinning, Microstructure, and Thermal Stability

(2016) Devinder Yadav et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Review of thermal conductivity in composites: Mechanisms, parameters and theory

(2016) N. Burger et al.   PROGRESS IN POLYMER SCIENCE

Microstructure and mechanical properties of Al/Ti/Al laminated composites prepared by roll bonding

(2015) M. Ma et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The Origin of High Thermal Conductivity and Ultralow Thermal Expansion in Copper–Graphite Composites

(2015) Izabela Firkowska et al.   NANO LETTERS

Microstructural characterization and mechanical properties of functionally graded Al2024/SiC composites prepared by powder metallurgy techniques

(2015) F. ERDEMIR et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Simulation of shear banding in heterophase co-deformation: Example of plane strain compressed Cu–Ag and Cu–Nb metal matrix composites

(2013) N. Jia et al.   ACTA MATERIALIA

Thermal and mechanical properties of infiltrated W/CuCrZr composite materials for functionally graded heat sink application

(2013) J.-H. You et al.   JOURNAL OF NUCLEAR MATERIALS

The ballistic performance of SiC–AA7075 functionally graded composite produced by powder metallurgy

(2013) Mustafa Übeyli et al.   MATERIALS & DESIGN

Finite element simulation of accumulative roll-bonding process

(2013) Tadanobu Inoue et al.   MATERIALS LETTERS

Thermal conductivity of Al–SiC composites with monomodal and bimodal particle size distribution

(2007) J.M. Molina et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING