标题
UFSW tool pin profile effects on properties of aluminium-steel joint
作者
关键词
Underwater friction stir welding, Pin profile, Dissimilar joint, Mechanical properties
出版物
VACUUM
Volume 192, Issue -, Pages 110460
出版商
Elsevier BV
发表日期
2021-07-17
DOI
10.1016/j.vacuum.2021.110460
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Friction Spot Extrusion Welding on Dissimilar Materials AA2024-T3 to AA5754-O: Effect of Shoulder Plunge Depth
- (2021) S. Memon et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Milling Force Model for Aviation Aluminum Alloy: Academic Insight and Perspective Analysis
- (2021) Zhenjing Duan et al. Chinese Journal of Mechanical Engineering
- Effects of Rapid Cooling on Properties of Aluminum-Steel Friction Stir Welded Joint
- (2021) Hamed Aghajani Derazkola et al. Materials
- Effects of materials positioning and tool rotational speed on metallurgical and mechanical properties of dissimilar modified friction stir clinching of AA5754-O and AA2024-T3 sheets
- (2021) S. Memon et al. Results in Physics
- A time-domain stepwise fatigue assessment to bridge small-scale fracture mechanics with large-scale system dynamics for high-speed maglev lightweight bogies
- (2021) Feng Guo et al. ENGINEERING FRACTURE MECHANICS
- Dissimilar welding of AA5083 to AZ31 Mg alloys using Modified friction stir clinching brazing
- (2021) M. Paidar et al. MATERIALS LETTERS
- Modified Friction Stir Clinching of AA5754-O to AA6061-T6: The role of shoulder feature on the metallurgical and mechanical properties
- (2021) K.S. Ashraff Ali et al. VACUUM
- Underwater friction stir welding of PC: Experimental study and thermo-mechanical modelling
- (2021) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint
- (2021) Hesamoddin Aghajani Derazkola et al. CIRP Journal of Manufacturing Science and Technology
- Thermal Effect of Welding on Mechanical Behavior of High-Strength Steel
- (2021) Jin Jiang et al. JOURNAL OF MATERIALS IN CIVIL ENGINEERING
- Friction stir riveting (FSR) of AA6061-T6 aluminum alloy and DP600 steel
- (2021) He Shan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Improvement of microstructure and mechanical properties of dissimilar friction stir welded aluminum/titanium joints via aluminum oxide nanopowder
- (2021) Taher A. Shehabeldeen et al. VACUUM
- Influence of aluminium-rich intermetallics on microstructure evolution and mechanical properties of friction stir alloyed Al Fe alloy system
- (2021) Abhishek Sharma et al. Journal of Manufacturing Processes
- The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures
- (2020) Zeshan Alam et al. Earthquake Engineering and Engineering Vibration
- Stress Sensitivity of Fractured and Vuggy Carbonate: An X‐Ray Computed Tomography Analysis
- (2020) Yongfei Yang et al. JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH
- Simulation and experimental study of underwater dissimilar friction-stir welding between aluminium and steel
- (2020) Arameh Eyvazian et al. Journal of Materials Research and Technology-JMR&T
- Experimental Investigation and Error Analysis of High Precision FBG Displacement Sensor for Structural Health Monitoring
- (2020) Chuang Li et al. International Journal of Structural Stability and Dynamics
- Influence of seismic incident angle on response uncertainty and structural performance of tall asymmetric structure
- (2020) Zeshan Alam et al. STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS
- Effect of friction stir processing on microstructure and tensile properties of as-cast Mg–8Li–3Al–2Sn (wt.%) alloy
- (2020) Xiaoyang Chen et al. VACUUM
- Relationship between FSW parameters and hardness of the ferritic steel joints: Modeling and optimization
- (2020) Güldal Güleryüz VACUUM
- Development of fed friction-stir (FFS) process for dissimilar nanocomposite welding between AA2024 aluminum alloy and polycarbonate (PC)
- (2020) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Elucidation of interfacial microstructure and properties in friction stir lap welding of aluminium alloy and mild steel
- (2020) Amlan Kar et al. MATERIALS CHARACTERIZATION
- Evaluation of a polymer-steel laminated sheet composite structure produced by friction stir additive manufacturing (FSAM) technology
- (2020) H. Aghajani Derazkola et al. POLYMER TESTING
- Fabrication of a nanostructured high strength steel tube by friction-forging tubular additive manufacturing (FFTAM) technology
- (2020) H. Aghajani Derazkola et al. Journal of Manufacturing Processes
- Evaluation of the formation of intermetallic compounds at the intermixing lines and in the nugget of dissimilar steel/aluminum friction stir welds
- (2020) Mohamed M. Abd Elnabi et al. Journal of Materials Research and Technology-JMR&T
- Multifunctional Textiles/Metal−Organic Frameworks Composites for Efficient Ultraviolet Radiation Blocking and Noise Reduction
- (2020) Kun Zhang et al. ACS Applied Materials & Interfaces
- Friction spot extrusion welding-brazing of copper to aluminum alloy
- (2020) M. Paidar et al. MATERIALS LETTERS
- Weldability of AA6061-T6 and AISI 304 by underwater friction stir welding
- (2019) Raju P. Mahto et al. Journal of Manufacturing Processes
- Underwater submerged dissimilar friction-stir welding of AA5083 aluminum alloy and A441 AISI steel
- (2019) Hamed Aghajani Derazkola et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Parameter analysis of damaged region for laminates with matrix defects
- (2019) ZQ Huang et al. JOURNAL OF SANDWICH STRUCTURES & MATERIALS
- Submerged friction stir welding of dissimilar joints between an Al-Mg alloy and low carbon steel: Thermo-mechanical modeling, microstructural features, and mechanical properties
- (2019) Hamed Aghajani Derazkola et al. Journal of Manufacturing Processes
- Metallurgical and mechanical properties of underwater friction stir welds of Al7075 aluminum alloy
- (2018) R. Rouzbehani et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- A study on microstructure and mechanical properties of AA 3003 aluminum alloy joints by underwater friction stir welding
- (2017) Y.B. Tan et al. MATERIALS CHARACTERIZATION
- Modeling and simulation of dynamic recrystallization behavior for 42CrMo steel by an extended cellular automaton method
- (2017) Ming-Song Chen et al. VACUUM
- Effects of processing parameters on microstructure and mechanical behaviors of underwater friction stir welding of Al5083 alloy
- (2017) Farzad Heirani et al. Journal of Manufacturing Processes
- Improvement in Joint Strength of Spray-Deposited Al-Zn-Mg-Cu Alloy in Underwater Friction Stir Welding by Altered Temperature of Cooling Water
- (2016) Haimei Liang et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- Investigations of tool tilt angle on properties friction stir welding of A441 AISI to AA1100 aluminium
- (2016) Majid Elyasi et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- The strengthening mechanism of spray forming Al-Zn-Mg-Cu alloy by underwater friction stir welding
- (2016) Qingzhao Wang et al. MATERIALS & DESIGN
- Influence of cooling conditions on joint properties and microstructures of aluminum and magnesium dissimilar alloys by friction stir welding
- (2015) Yong Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminum and magnesium dissimilar alloys
- (2015) Yong Zhao et al. MATERIALS & DESIGN
- Analysis of process parameters effects on dissimilar friction stir welding of AA1100 and A441 AISI steel
- (2015) H. A. Derazkola et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- The adjustment strategy of welding parameters for spray formed 7055 aluminum alloy underwater friction stir welding joint
- (2015) Qingzhao Wang et al. MATERIALS & DESIGN
- Study on governing parameters of thermal history during underwater friction stir welding
- (2014) Hossein Papahn et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation on dissimilar underwater friction stir lap welding of 6061-T6 aluminum alloy to pure copper
- (2014) Jingqing Zhang et al. MATERIALS & DESIGN
- Mathematical model and optimization for underwater friction stir welding of a heat-treatable aluminum alloy
- (2012) Huijie Zhang et al. MATERIALS & DESIGN
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreCreate your own webinar
Interested in hosting your own webinar? Check the schedule and propose your idea to the Peeref Content Team.
Create Now