标题
Low velocity impact on fibre metal laminates: A review
作者
关键词
-
出版物
JOURNAL OF COMPOSITE MATERIALS
Volume -, Issue -, Pages -
出版商
SAGE Publications
发表日期
2023-10-26
DOI
10.1177/00219983231212544
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- A novel oblique impact model for elastic solids
- (2023) Meng-Jing Wu et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Lightweight hybrid composite sandwich structures with additively manufactured cellular cores
- (2023) Albert Forés-Garriga et al. THIN-WALLED STRUCTURES
- Cylindrical Impacts on GLARE 5 Plates with Open Hole
- (2022) Sasanka Kakati et al. APPLIED COMPOSITE MATERIALS
- Dynamic response of sandwich plates with GLARE face-sheets and honeycomb core under metal foam projectile impact: Experimental and numerical investigations
- (2022) Jianxun Zhang et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Improvement of the structural, thermal, and mechanical properties of polyurethane adhesives with nanoparticles and their application to Al/Al honeycomb sandwich panels
- (2022) Mehmet Emin Çetin Materials Testing
- Finite element analysis on impact response and damage mechanism of composite laminates under single and repeated low-velocity impact
- (2022) Junjie Zhou et al. AEROSPACE SCIENCE AND TECHNOLOGY
- Progressive Damage Behaviour Analysis and Comparison with 2D/3D Hashin Failure Models on Carbon Fibre–Reinforced Aluminium Laminates
- (2022) Haichao Hu et al. Polymers
- Computational model for predicting the low-velocity impact resistance and tolerance of composite laminates
- (2022) Maitham Alabbad et al. COMPOSITES PART B-ENGINEERING
- Influence of constitutive metal model on the numerical prediction of the impact behaviour of titanium-based Fibre Metal Laminates
- (2022) Piotr Podolak et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Temperature effects on the low-velocity impact of FML panels: Experimental and numerical analyses
- (2022) Zhen Pei Chow et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Delamination in GLARE laminates subjected to oblique low velocity impact considering friction
- (2022) Sasanka Kakati et al. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS
- Energy dissipation mechanism of fiber metal laminate under low-velocity impact
- (2022) Jipeng Zhang et al. THIN-WALLED STRUCTURES
- Impact Behavior of Carbon Fiber/Epoxy Composites and Fiber Metal Laminates with Open Holes
- (2021) Carlos Rubio-González et al. FIBERS AND POLYMERS
- Effects of cryogenic and warm temperatures on quasi-static penetration resistance of carbon-aramid hybrid nanocomposites reinforced using halloysite nanotubes
- (2021) Mehmet Emin Çetin et al. MECHANICS OF MATERIALS
- Nanoparticles enhanced interfaces of Glass fiber laminate aluminum reinforced epoxy ( GLARE ) fiber metal laminates
- (2021) Obaid Ur Rauf et al. POLYMER COMPOSITES
- An experimental and numerical investigation on low velocity impact response of GLAREs
- (2021) Soroush Azhdari et al. COMPOSITE STRUCTURES
- Potential fabric-reinforced composites: a comprehensive review
- (2021) K. M. Faridul Hasan et al. JOURNAL OF MATERIALS SCIENCE
- The effect of carbon nanotubes modified polyurethane adhesive on the impact behavior of sandwich structures
- (2021) Mehmet Emin Çetin POLYMER COMPOSITES
- Numerical and experimental investigation on the oblique successive impact behavior and accumulated damage characteristics of fiber metal laminates
- (2021) Lu Yao et al. THIN-WALLED STRUCTURES
- New Advances and Future Possibilities in Forming Technology of Hybrid Metal–Polymer Composites Used in Aerospace Applications
- (2021) Tomasz Trzepieciński et al. Journal of Composites Science
- The issue of CAI assessment of Fibre Metal Laminates
- (2021) Patryk Jakubczak et al. COMPOSITE STRUCTURES
- Fabrication, characterization and mechanical testing of carbon fiber sandwich composites with nanoparticle included polyurethane adhesives
- (2021) Mehmet Emin Çetin JOURNAL OF COMPOSITE MATERIALS
- The effect of halloysite nanotube modification on wear behavior of carbon‐aramid fiber reinforced hybrid nanocomposites
- (2021) Mehmet Emin Çetin et al. POLYMER COMPOSITES
- An experimental investigation on the effect of incorporating graphene nanoplatelets on the low-velocity impact behavior of fiber metal laminates
- (2021) Azadeh Fathi et al. THIN-WALLED STRUCTURES
- Influence of oblique low velocity impact on damage behavior of 2D and 3D woven composites: Experimental and numerical methods
- (2021) Behzad Kazemianfar et al. THIN-WALLED STRUCTURES
- Can a 3D woven GFRP composite really provide better impact resistance compared to a 2D woven GFRP composite at all of the thicknesses?
- (2021) Behzad Kazemianfar et al. Structures
- Numerical investigation on the repeated low-velocity impact behavior of composite laminates
- (2020) Junjie Zhou et al. COMPOSITES PART B-ENGINEERING
- Delamination in GLARE laminates under low velocity impact
- (2020) Sasanka Kakati et al. COMPOSITE STRUCTURES
- Experimental and numerical study of the behavior of a Glass Fiber Reinforced Plastic plate under oblique impact
- (2020) MV Zhikharev et al. JOURNAL OF COMPOSITE MATERIALS
- Experimental Investigation on the Effects of Core/Facing Interface Performance on the Low-Velocity Impact Behavior of Honeycomb Sandwich Panels
- (2020) Ahmet Meram et al. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
- On the effect of glass and carbon fiber hybridization in fiber metal laminates: Analytical, numerical and experimental investigation
- (2019) Konrad Dadej et al. COMPOSITE STRUCTURES
- The impact behaviour of Hybrid Titanium Glass Laminates – experimental and numerical approach
- (2019) P. Jakubczak INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES
- Investigation on impact behavior of FMLs under multiple impacts with the same total energy: Experimental characterization and numerical simulation
- (2019) Lu Yao et al. COMPOSITE STRUCTURES
- Experimental investigation on response and failure modes of 2D and 3D woven composites under low velocity impact
- (2019) Behzad Kazemianfar et al. JOURNAL OF MATERIALS SCIENCE
- Low velocity impact response of GLARE laminates based on a new efficient implementation of Puck's criterion
- (2019) Ziwen Wang et al. THIN-WALLED STRUCTURES
- Study on the delamination behavior of thick composite laminates under low-energy impact
- (2018) He Ran Wang et al. COMPOSITE STRUCTURES
- An experimental study on the effect of adding multi-walled carbon nanotubes on high-velocity impact behavior of fiber metal laminates
- (2018) H. Khoramishad et al. COMPOSITE STRUCTURES
- The modelling of impact loading on thermoplastic fibre-metal laminates
- (2018) Rafael C. Santiago et al. COMPOSITE STRUCTURES
- A new approach to enhancing interlaminar strength and galvanic corrosion resistance of CFRP/Mg laminates
- (2018) Yingcai Pan et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Isostrain elastoplastic model for prediction of static strength and fatigue life of fiber metal laminates
- (2018) Konrad Dadej et al. INTERNATIONAL JOURNAL OF FATIGUE
- Influence of fiber type on the impact response of titanium-based fiber-metal laminates
- (2018) Xin Li et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Effect of Stacking Sequence on Low-Velocity Impact Behavior of Metal Laminates
- (2018) H. Khoramishad et al. Physical Mesomechanics
- Effect of Stacking Sequence on Low-Velocity Impact Behavior of Metal Laminates
- (2018) H. Khoramishad et al. Physical Mesomechanics
- Finite element analysis of composite laminates subjected to low-velocity impact based on multiple failure criteria
- (2018) Z W Wang et al. Materials Research Express
- Low-velocity impact of sandwich beams with fibre-metal laminate face-sheets
- (2018) Jianxun Zhang et al. COMPOSITES SCIENCE AND TECHNOLOGY
- An efficient and robust VUMAT implementation of elastoplastic constitutive laws in Abaqus/Explicit finite element code
- (2018) Lu Ming et al. Mechanics & Industry
- Repeated low-velocity impact response and damage mechanism of glass fiber aluminium laminates
- (2018) Lijun Li et al. AEROSPACE SCIENCE AND TECHNOLOGY
- Finite element and analytical modeling to predict the frictional oblique indentation response of GLARE fiber–metal laminates
- (2017) George SE Bikakis JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Oblique Low-Velocity Impact on Fiber-Metal Laminates
- (2016) M. Heydari-Meybodi et al. APPLIED COMPOSITE MATERIALS
- Impact behaviour of glass fibre-reinforced epoxy/aluminium fibre metal laminate manufactured by Vacuum Assisted Resin Transfer Moulding
- (2016) I. Ortiz de Mendibil et al. COMPOSITE STRUCTURES
- Low velocity impact analysis of Fiber Metal Laminates (FMLs) in thermal environments with various boundary conditions
- (2016) Hamed Zarei et al. COMPOSITE STRUCTURES
- Experimental and numerical investigation into the influence of stacking sequence on the low-velocity impact response of new 3D FMLs
- (2016) Zohreh Asaee et al. COMPOSITE STRUCTURES
- Low velocity impact response of composites and fiber metal laminates with open holes
- (2016) C Rubio-González et al. JOURNAL OF COMPOSITE MATERIALS
- An experimental review on the mechanical properties and hygrothermal behaviour of fibre metal laminates
- (2016) M Chandrasekar et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Low-velocity impact response of fiber-metal laminates consisting of different standard GLARE grades
- (2016) George SE Bikakis et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Dynamic response and damage analysis of fiber-reinforced composite laminated plates under low-velocity oblique impact
- (2016) Yiqi Mao et al. NONLINEAR DYNAMICS
- Low-energy impact behaviour and damage characterization of carbon fibre reinforced polymer and aluminium hybrid laminates
- (2015) J. Bieniaś et al. Archives of Civil and Mechanical Engineering
- Low velocity impact of carbon fiber aluminum laminates
- (2015) Guo-Cai Yu et al. COMPOSITE STRUCTURES
- Galvanic corrosion behaviour of carbon fibre reinforced polymer/magnesium alloys coupling
- (2015) Yingcai Pan et al. CORROSION SCIENCE
- Effects of mechanical and geometrical properties of adhesive and metal layers on low-velocity impact behavior of metal laminate structures
- (2015) Hadi Khoramishad et al. JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
- Inclusion of a thermoplastic phase to improve impact and post-impact performances of carbon fibre reinforced thermosetting composites — A review
- (2015) N.H. Nash et al. MATERIALS & DESIGN
- Influence of yarn gripping on the ballistic performance of woven fabrics from ultra-high molecular weight polyethylene fibre
- (2014) Yi Zhou et al. COMPOSITES PART B-ENGINEERING
- Modelling of impact damage and dynamics in fibre-metal laminates – A review
- (2014) F.D. Morinière et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- An integrated study on the low-velocity impact response of the GLARE fibre-metal laminate
- (2013) F.D. Morinière et al. COMPOSITE STRUCTURES
- Influences of thickness and stacking sequence on ballistic impact behaviors of GLARE 5 FML plates: Part I-experimental studies
- (2013) A Seyed Yaghoubi et al. JOURNAL OF COMPOSITE MATERIALS
- Influences of thickness and stacking sequence on ballistic impact behaviors of GLARE 5 FML plates: Part II – Numerical studies
- (2013) A Seyed Yaghoubi et al. JOURNAL OF COMPOSITE MATERIALS
- Drop-weight impact response of hybrid composites impacted by impactor of various geometries
- (2013) Ercan Sevkat et al. MATERIALS & DESIGN
- Low-velocity impact energy partition in GLARE
- (2013) F.D. Morinière et al. MECHANICS OF MATERIALS
- Thickness influence on ballistic impact behaviors of GLARE 5 fiber-metal laminated beams: Experimental and numerical studies
- (2012) A. Seyed Yaghoubi et al. COMPOSITE STRUCTURES
- Modelling damage evolution in composite laminates subjected to low velocity impact
- (2012) Y. Shi et al. COMPOSITE STRUCTURES
- Simulation of drop-weight impact and compression after impact tests on composite laminates
- (2012) E.V. González et al. COMPOSITE STRUCTURES
- Modelling of the low-impulse blast behaviour of fibre–metal laminates based on different aluminium alloys
- (2012) Thuc P. Vo et al. COMPOSITES PART B-ENGINEERING
- Low-velocity impact response of fibre–metal laminates – Experimental and finite element analysis
- (2012) Shengqing Zhu et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Effect of lay-up orientation on ballistic impact behaviors of GLARE 5 FML beams
- (2012) A. Seyed Yaghoubi et al. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING
- Low-Velocity Impact Study on GLARE FMLs Using Various Indenters
- (2012) Yanxiong Liu et al. JOURNAL OF AEROSPACE ENGINEERING
- High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels
- (2012) A.A. Ramadhan et al. MATERIALS & DESIGN
- An investigation of the comparative behaviour of alternative contact force models during inelastic collisions
- (2012) Colin Thornton et al. POWDER TECHNOLOGY
- Blast Resistance and Damage Modelling of Fibre Metal Laminates to Blast Loads
- (2011) Galal F. A. Mohamed et al. APPLIED COMPOSITE MATERIALS
- Experimental and Numerical Investigation of Metal Type and Thickness Effects on the Impact Resistance of Fiber Metal Laminates
- (2011) M. Sadighi et al. APPLIED COMPOSITE MATERIALS
- Numerical modelling of perforation failure in fibre metal laminates subjected to low velocity impact loading
- (2011) J. Fan et al. COMPOSITE STRUCTURES
- Damage characterization of titanium/GFRP hybrid laminates subjected to low-velocity impact
- (2011) Hayato Nakatani et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Impact response of fiber metal laminate sandwich composite structure with polypropylene honeycomb core
- (2011) C.Y. Tan et al. COMPOSITES PART B-ENGINEERING
- Low-Velocity Impact on GLARE 5 Fiber-Metal Laminates: Influences of Specimen Thickness and Impactor Mass
- (2011) A. Seyed Yaghoubi et al. JOURNAL OF AEROSPACE ENGINEERING
- Low-velocity impact behavior of fiber metal laminates
- (2011) N. Tsartsaris et al. JOURNAL OF COMPOSITE MATERIALS
- Explorations of Hybrid Sandwich Panel Concepts for Projectile Impact Mitigation
- (2011) Christian J. Yungwirth et al. JOURNAL OF THE AMERICAN CERAMIC SOCIETY
- Stacking Sequence and Geometrical Effects on Low-Velocity Impact Behaviors of GLARE 5 (3/2) Fiber–Metal Laminates
- (2011) A. Seyed Yaghoubi et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- An investigation of the comparative behaviour of alternative contact force models during elastic collisions
- (2011) Colin Thornton et al. POWDER TECHNOLOGY
- Numerical Simulation of Glass-Fiber-Reinforced Aluminum Laminates with Diverse Impact Damage
- (2010) Hyoungseock Seo et al. AIAA JOURNAL
- The low-velocity impact response of fiber-metal laminates
- (2010) J. Fan et al. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
- Effects of Constituents and Lay-up Configuration on Drop-Weight Tests of Fiber-Metal Laminates
- (2009) Yanxiong Liu et al. APPLIED COMPOSITE MATERIALS
- Dynamic response of pre-stressed fibre metal laminate (FML) circular cylindrical shells subjected to lateral pressure pulse loads
- (2009) S.M.R. Khalili et al. COMPOSITE STRUCTURES
- Modeling and damage repair of woven thermoplastic composites subjected to low velocity impact
- (2009) German Reyes et al. COMPOSITE STRUCTURES
- A note on the effect of initial particle spin on the rebound behaviour of oblique particle impacts
- (2009) C. Thornton POWDER TECHNOLOGY
- A semi-analytical model for oblique impacts of elastoplastic spheres
- (2009) C.-Y. Wu et al. PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES
- Dynamic response of fiber–metal laminates (FMLs) subjected to low-velocity impact
- (2009) G.H. Payeganeh et al. THIN-WALLED STRUCTURES
- Influence of diameter and boundary conditions on low velocity impact response of CFRP circular laminated plates
- (2008) Giangiacomo Minak et al. COMPOSITES PART B-ENGINEERING
- The applicability of magnesium based Fibre Metal Laminates in aerospace structures
- (2008) R ALDERLIESTEN et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Transverse Impact Damage and Energy Absorption of Three-Dimensional Orthogonal Hybrid Woven Composite: Experimental and FEM Simulation
- (2008) Lihua Lv et al. JOURNAL OF COMPOSITE MATERIALS
- Finite element analysis for stress concentration and deflection in isotropic, orthotropic and laminated composite plates with central circular hole under transverse static loading
- (2008) N.K. Jain et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Publish scientific posters with Peeref
Peeref publishes scientific posters from all research disciplines. Our Diamond Open Access policy means free access to content and no publication fees for authors.
Learn MoreBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started