Deformation mechanism and mechanical properties of a CoCrFeNi high-entropy alloy via room-temperature rolling, cryorolling, and asymmetric cryorolling

Grain refinement of a NiCoFe medium entropy alloy: composition design from solute interaction perspective

(2023) Z.H. Yin et al.   Journal of Alloys and Compounds

Microstructure and mechanical properties of Ti–6Al–4V alloy sheets via room-temperature rolling and cryorolling

(2022) Feilong Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High strength BCC magnesium-Lithium alloy processed by cryogenic rolling and room temperature rolling and its strengthening mechanisms

(2022) Qing Ji et al.   MATERIALS CHARACTERIZATION

Strength-ductility synergy of Al0.3CoCrFeNiCu high-entropy alloy via cold rolling and subsequent annealing

(2022) Jiaen Lin et al.   MATERIALS LETTERS

An investigation on the microstructure and mechanical properties of Al0.3CoCrFeNi high entropy alloy with a heterogeneous microstructure

(2022) Yanni Zhao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effects of annealing process parameters on microstructural evolution and strength-ductility combination of CoCrFeMnNi high-entropy alloy

(2022) Pengfei Wang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Enhancing the strength-ductility trade-off in a NiCoCr-based medium-entropy alloy with the synergetic effect of ultra fine precipitates, stacking faults, dislocation locks and twins

(2022) Lu Zhang et al.   SCRIPTA MATERIALIA

Preparation of high-mechanical-property medium-entropy CrCoNi alloy by asymmetric cryorolling

(2022) Yu-ze WU et al.   TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA

Regulation of strength and ductility of single-phase twinning-induced plasticity high-entropy alloys

(2022) Daixiu Wei et al.   SCRIPTA MATERIALIA

Achieving ultra-high strength in a face-centered-cubic FeCrCoNi high entropy alloy through dense nanotwins bundles structure prepared by cryo-rolling

(2022) Longfei Zeng et al.   INTERMETALLICS

Microstructures and mechanical properties of a CoCrFeNiMn high-entropy alloy obtained by 223 K cryorolling and subsequent annealing

(2022) Yuze Wu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Powder plasma arc additive manufacturing of CoCrFeNiWx high-entropy alloys: Microstructure evolution and mechanical properties

(2022) Qingkai Shen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Twinning susceptibility of CrCoNi medium entropy alloy to cryogenic temperature during asymmetric rolling

(2022) Yuze Wu et al.   Journal of Materials Research and Technology-JMR&T

A Fe-rich Co-free high entropy alloy with excellent mechanical and anti-bacterial properties in cold-rolled state

(2022) Nuo Lei et al.   MATERIALS LETTERS

Phase reversion-induced heterogeneous structure in a ferrous medium-entropy alloy via cryorolling and annealing

(2022) Shilei Liu et al.   SCRIPTA MATERIALIA

Revealing the relationship between microstructures, textures, and mechanical behaviors of cold-rolled Al0.1CoCrFeNi high-entropy alloys

(2021) Jinxiong Hou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Direct evidence of the stacking fault-mediated strain hardening phenomenon

(2021) M. Frank et al.   APPLIED PHYSICS LETTERS

Achieving high strength and ductility in a heterogeneous-grain-structured CrCoNi alloy processed by cryorolling and subsequent short-annealing

(2021) Xiaoyan Zheng et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Towards strength-ductility synergy in a CrCoNi solid solution alloy via nanotwins

(2021) Kun Jiang et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Effect of roll speed ratio on the texture and microstructural evolution of an FCC high-entropy alloy during differential speed rolling

(2021) H.T. Jeong et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

(2020) Tiwen Lu et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY

Annealing hardening in cryo-rolled high-entropy alloys by belated deformation twinning

(2020) Qian Xiao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Study of Texture Analysis on Asymmetric Cryorolled and Annealed CoCrNi Medium Entropy Alloy

(2020) Yuze Wu et al.   Crystals

9R phase enabled superior radiation stability of nanotwinned Cu alloys via in situ radiation at elevated temperature

(2019) Cuncai Fan et al.   ACTA MATERIALIA

Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys

(2019) Shuhei Yoshida et al.   ACTA MATERIALIA

Altered microstructural evolution and mechanical properties of CoCrFeNiMo0.15 high-entropy alloy by cryogenic rolling

(2019) Wenqian Wu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Interfacial nanophases stabilize nanotwins in high-entropy alloys

(2019) Wenjun Lu et al.   ACTA MATERIALIA

Dynamic shear deformation of a CrCoNi medium-entropy alloy with heterogeneous grain structures

(2018) Yan Ma et al.   ACTA MATERIALIA

Stacking fault energy of face-centered-cubic high entropy alloys

(2018) S.F. Liu et al.   INTERMETALLICS

Mechanical properties and microstructure of a Ti-6Al-4V alloy subjected to cold rolling, asymmetric rolling and asymmetric cryorolling

(2018) Hailiang Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Cryogenic-deformation-induced phase transformation in an FeCoCrNi high-entropy alloy

(2018) Qingyun Lin et al.   Materials Research Letters

A superior combination of strength-ductility in CoCrFeNiMn high-entropy alloy induced by asymmetric rolling and subsequent annealing treatment

(2018) Z.H. Han et al.   MATERIALS CHARACTERIZATION

Structural evolutions of metallic materials processed by severe plastic deformation

(2018) Yang Cao et al.   MATERIALS SCIENCE & ENGINEERING R-REPORTS

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

(2018) Yao-Jian Liang et al.   Nature Communications

Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy

(2018) Jing Su et al.   ACTA MATERIALIA

Superb cryogenic strength of equiatomic CrCoNi derived from gradient hierarchical microstructure

(2018) Bin Gan et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Excellent ductility and serration feature of metastable CoCrFeNi high-entropy alloy at extremely low temperatures

(2018) Junpeng Liu et al.   Science China-Materials

Effect of strain path on microstructure and texture formation in cold-rolled and annealed FCC equiatomic CoCrFeMnNi high entropy alloy

(2017) S.R. Reddy et al.   INTERMETALLICS

Amorphization at twin-twin intersected region in FeCoCrNi high-entropy alloy subjected to high-pressure torsion

(2017) Wenqian Wu et al.   MATERIALS CHARACTERIZATION

Strengthening in Al 0.25 CoCrFeNi high-entropy alloys by cold rolling

(2017) Jinxiong Hou et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

High-velocity projectile impact induced 9R phase in ultrafine-grained aluminium

(2017) Sichuang Xue et al.   Nature Communications

Polymorphism in a high-entropy alloy

(2017) Fei Zhang et al.   Nature Communications

Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy

(2016) G. Laplanche et al.   ACTA MATERIALIA

Thermal activation mechanisms and Labusch-type strengthening analysis for a family of high-entropy and equiatomic solid-solution alloys

(2016) Zhenggang Wu et al.   ACTA MATERIALIA

Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy

(2016) G. Dan Sathiaraj et al.   INTERMETALLICS

Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion

(2016) Hamed Shahmir et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructural evolution and mechanical properties of low SFE Cu-Al alloys processed by cryorolling followed by short-annealing

(2016) S.M. Dasharath et al.   MATERIALS & DESIGN

Correlation between dislocation organization and slip bands: TEM and AFM investigations in hydrogen-containing nickel and nickel–chromium

(2015) G. Girardin et al.   ACTA MATERIALIA

Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

(2015) B. Schuh et al.   ACTA MATERIALIA

Effect of cryo-deformation on structure and properties of CoCrFeNiMn high-entropy alloy

(2015) N. Stepanov et al.   INTERMETALLICS

Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy

(2015) G. Dan Sathiaraj et al.   MATERIALS CHARACTERIZATION

On the micro-deformation mechanisms active in high-manganese austenitic steels under impact loading

(2015) B. Bal et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Microstructure and Texture Evolution During Symmetric and Asymmetric Rolling of a Martensitic Ti-6Al-4V Alloy

(2015) Qi Chao et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Microstructure evolution and strengthening mechanisms of Fe–23Mn–0.3C–1.5Al TWIP steel during cold rolling

(2014) Pavel Kusakin et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

(2013) F. Otto et al.   ACTA MATERIALIA

Mechanical properties of Al–Mg–Si alloy sheets produced using asymmetric cryorolling and ageing treatment

(2013) Hai-liang Yu et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Critique of mechanisms of formation of deformation, annealing and growth twins: Face-centered cubic metals and alloys

(2012) S. Mahajan   SCRIPTA MATERIALIA

The role of twinning on microstructure and mechanical response of severely deformed single crystals of high-manganese austenitic steel

(2011) E.G. Astafurova et al.   MATERIALS CHARACTERIZATION

Shear band evolution and hardness change in cold-rolled bulk metallic glasses

(2010) J.W. Liu et al.   ACTA MATERIALIA

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

(2010) Marion Calcagnotto et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Formation of single and multiple deformation twins in nanocrystalline fcc metals

(2009) Y.T. Zhu et al.   ACTA MATERIALIA

Twinning partial multiplication at grain boundary in nanocrystalline fcc metals

(2009) Y. T. Zhu et al.   APPLIED PHYSICS LETTERS