High-purity CO2 recovery following two-stage temperature swing adsorption using an internally heated and cooled adsorber

Rapid temperature swing adsorption using microwave regeneration for carbon capture

(2022) Yamid Gomez-Rueda et al.   CHEMICAL ENGINEERING JOURNAL

CO2 Capture from a Simulated Dry Exhaust Gas by Internally Heated and Cooled Temperature Swing Adsorption

(2021) Soichiro Masuda et al.   JOURNAL OF CHEMICAL ENGINEERING OF JAPAN

Adsorption of Carbon Dioxide for Post-combustion Capture: A Review

(2021) Federica Raganati et al.   ENERGY & FUELS

The value of CCUS in transitions to net-zero emissions

(2021) Chris Greig et al.   Electricity Journal

A new heat supply strategy for CO2 capture process based on the heat recovery from turbine exhaust steam in a coal-fired power plant

(2021) Liheng Guo et al.   ENERGY

Carbon dioxide recovery from a simulated dry exhaust gas by an internally heated and cooled temperature swing adsorption packed with a typical hydrophobic adsorbent

(2021) Soichiro MASUDA et al.   SEPARATION AND PURIFICATION TECHNOLOGY

Comparative analysis on temperature swing adsorption cycle for carbon capture by using internal heat/mass recovery

(2020) L. Jiang et al.   APPLIED THERMAL ENGINEERING

Amine-based capture of CO2 for utilization and storage

(2020) Hidetaka Yamada   POLYMER JOURNAL

Post-combustion carbon capture

(2020) Cong Chao et al.   RENEWABLE & SUSTAINABLE ENERGY REVIEWS

Separation and enrichment of CH4 and CO2 from a dry biogas using a thermally regenerative adsorbent-packed heat exchanger

(2019) Nur Izdiharr Zainol et al.   ADSORPTION-JOURNAL OF THE INTERNATIONAL ADSORPTION SOCIETY

A new honeycomb carbon monolith for CO2 capture by rapid temperature swing adsorption using steam regeneration

(2019) Brieuc Verougstraete et al.   CHEMICAL ENGINEERING JOURNAL

A multi-stage fluidized bed system for continuous CO 2 capture by means of temperature swing adsorption – First results from bench scale experiments

(2017) Gerhard Schöny et al.   POWDER TECHNOLOGY

CO2 Capture by Temperature Swing Adsorption: Use of Hot CO2-Rich Gas for Regeneration

(2016) Augustine Ntiamoah et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Poly(amide-imide)/Silica Supported PEI Hollow Fiber Sorbents for Postcombustion CO2 Capture by RTSA

(2014) Ying Labreche et al.   ACS Applied Materials & Interfaces

Modeling of rapid temperature swing adsorption using hollow fiber sorbents

(2014) Fateme Rezaei et al.   CHEMICAL ENGINEERING SCIENCE

Thermal Swing Adsorption Process for Carbon Dioxide Capture and Recovery: Modeling, Simulation, Parameters Estimability, and Identification

(2013) M. Lei et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Development of solid adsorbent for carbon dioxide capture from flue gas

(2013) Srikanta Dinda   SEPARATION AND PURIFICATION TECHNOLOGY

Advances in CO2 capture technology: A patent review

(2012) Bingyun Li et al.   APPLIED ENERGY

Enabling Low-Cost CO2Capture via Heat Integration

(2010) Ryan P. Lively et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Hollow Fiber Adsorbents for CO2Removal from Flue Gas

(2009) Ryan P. Lively et al.   INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH

Structured adsorbents in gas separation processes

(2009) F. Rezaei et al.   SEPARATION AND PURIFICATION TECHNOLOGY