Melt-Based Additive Manufacturing of Polyolefins Using Material Extrusion and Powder Bed Fusion
出版年份 2023 全文链接
标题
Melt-Based Additive Manufacturing of Polyolefins Using Material Extrusion and Powder Bed Fusion
作者
关键词
-
出版物
Polymer Reviews
Volume -, Issue -, Pages 1-66
出版商
Informa UK Limited
发表日期
2023-06-13
DOI
10.1080/15583724.2023.2220024
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Influence of material modification and fillers on the dimensional stability and warpage of polypropylene in screw‐extrusion‐based large area additive manufacturing
- (2023) Johannes Austermann et al. POLYMER ENGINEERING AND SCIENCE
- A comparison of mechanical properties of recycled high‐density polyethylene/waste carbon fiber via injection molding and 3D printing
- (2022) Ameya Borkar et al. POLYMER COMPOSITES
- Size and print path effects on mechanical properties of material extrusion 3D printed plastics
- (2022) Jia-Ruey Ai et al. Progress in Additive Manufacturing
- The essential work of fracture method for the characterisation of fusion bonding in 3D printed short carbon-fibre reinforced polyamide 6 thin films
- (2022) Qinghao He et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Investigating the Recyclability of Laser PP CP 75 Polypropylene Powder in Laser Powder Bed Fusion (L-PBF)
- (2022) Fredrick M. Mwania et al. Polymers
- Improving the adhesion and properties in the material extrusion of polypropylene by blending with a polyolefin elastomer
- (2022) Quang Binh Ho et al. Additive Manufacturing
- Accelerating heat transfer modeling in material extrusion additive manufacturing: From desktop to big area
- (2022) James T. Owens et al. Additive Manufacturing
- Tailoring interfacial properties of 3D-printed continuous natural fiber reinforced polypropylene composites through parameter optimization using machine learning methods
- (2022) Ruijun Cai et al. Materials Today Communications
- Biodegradation of 3D-Printed Biodegradable/Non-biodegradable Plastic Blends
- (2022) Shinhyeong Choe et al. ACS Applied Polymer Materials
- Fused Deposition Modeling of Polyolefins: Challenges and Opportunities
- (2022) Nandishwar Verma et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Slowing crystallization to enhance interlayer strength of 3D printed poly (ether ether ketone) parts by molecular design
- (2022) Yingshuang Shang et al. Additive Manufacturing
- Customized blends of polypropylene for extrusion based additive manufacturing
- (2022) Arit Das et al. JOURNAL OF VINYL & ADDITIVE TECHNOLOGY
- Rheology, crystallization, and process conditions: The effect on interlayer properties in three-dimensional printing
- (2022) Arit Das et al. PHYSICS OF FLUIDS
- Polypropylene/ poly(ethylene terephthalate) microfibrillar reinforced composites manufactured by fused filament fabrication
- (2021) Miaozi Huang et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Ageing of PBF‐Grade Poly(Phenylene Sulfide) Powder and its Effect on Critical Printability Properties
- (2021) Camden A. Chatham et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Fused filament fabrication of polypropylene: Influence of the bead temperature on adhesion and porosity
- (2021) Sébastien Charlon et al. Additive Manufacturing
- Flexural response of 3D printed sandwich composite
- (2021) H.S. Bharath et al. COMPOSITE STRUCTURES
- Characterization of thermally treated polypropylene powders with wide sintering window for powder bed fusion of polymers
- (2021) Xiaodi Gong et al. POLYMER TESTING
- Designing 3D printable polypropylene: Material and process optimisation through rheology
- (2021) M. Bertolino et al. Additive Manufacturing
- Rheological investigation of nylon‐carbon fiber composites fabricated using material extrusion‐based additive manufacturing
- (2021) Arit Das et al. POLYMER COMPOSITES
- Semi-crystalline feedstock for filament-based 3D printing of polymers
- (2021) Dries Vaes et al. PROGRESS IN POLYMER SCIENCE
- Why is Recycling of Postconsumer Plastics so Challenging?
- (2021) Bryan D. Vogt et al. ACS Applied Polymer Materials
- “Tying the Knot”: Enhanced Recycling through Ultrafast Entangling across Ultrahigh Molecular Weight Polyethylene Interfaces
- (2021) Fotis Christakopoulos et al. MACROMOLECULES
- Laser powder bed fusion of ultra-high molecular weight polyethylene (UHMWPE) using near-infrared ultrashort laser pulses
- (2021) Tobias Ullsperger et al. MATERIALS & DESIGN
- A review of fabrication polymer scaffolds for biomedical applications using additive manufacturing techniques
- (2020) Patrycja Szymczyk et al. Biocybernetics and Biomedical Engineering
- Polypropylene Copolymers Designed for Fused Filament Fabrication 3D‐Printing
- (2020) Gunnar Spiegel et al. Macromolecular Reaction Engineering
- Sintering the feasibility improvement and mechanical property of UHMWPE via selective laser sintering
- (2020) Xiaokang Zhu et al. PLASTICS RUBBER AND COMPOSITES
- An investigation of post treatment on properties and structure of ultrahigh molecular weight polyethylene parts prepared by selective laser sintering for biomedical application
- (2020) Yinglun Zhao et al. POLYMERS FOR ADVANCED TECHNOLOGIES
- Comparing mechanical properties of impact modified polypropylene-copolymer (IMPP) from injection molding (IM) and fused layer modeling (FLM) processes
- (2020) J. Elliott Sanders et al. RAPID PROTOTYPING JOURNAL
- Evaluation of the physico-mechanical properties of activated-carbon enhanced recycled polyethylene/polypropylene 3D printing filament
- (2020) Siewhui Chong et al. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES
- 3D printed continuous CF/PA6 composites: Effect of microscopic voids on mechanical performance
- (2020) Qinghao He et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Enhancing interlayer bonding strength of FDM 3D printing technology by diode laser-assisted system
- (2020) Nurbol Sabyrov et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Polyolefins based crystalline block copolymers: Ordered nanostructures from control of crystallization
- (2020) Claudio De Rosa et al. POLYMER
- Optimization and Quality Evaluation of the Interlayer Bonding Performance of Additively Manufactured Polymer Structures
- (2020) Patrick Striemann et al. Polymers
- Investigation into the shear property of thin-walled additively manufactured structures using staggered fused filament fabrication
- (2020) Thomas Romeijn et al. Additive Manufacturing
- Tailoring polypropylene for extrusion-based additive manufacturing
- (2020) Minde Jin et al. Additive Manufacturing
- Recent Progress on Polymer Materials for Additive Manufacturing
- (2020) Lisa Jiaying Tan et al. ADVANCED FUNCTIONAL MATERIALS
- 3D printing of semicrystalline polypropylene: towards eliminating warpage of printed objects
- (2020) Nirmalya Bachhar et al. BULLETIN OF MATERIALS SCIENCE
- In-situ X-ray scattering study of isotactic polypropylene/graphene nanocomposites under shear during fused deposition modeling 3D printing
- (2020) Yuval Shmueli et al. COMPOSITES SCIENCE AND TECHNOLOGY
- Comparative Analysis of Tribological and Mechanical Properties of Extrudable Polymer–Polymer UHMWPE Composites Fabricated by 3D Printing and Hot-Pressing Methods
- (2020) S. V. Panin et al. Journal of Friction and Wear
- Tailored crystalline structure and enhanced impact strength of isotactic polypropylene/high-density polyethylene blend by controlling the printing speed of fused filament fabrication
- (2020) Jie Leng et al. JOURNAL OF MATERIALS SCIENCE
- Mechanical behaviour of additively manufactured bioactive glass/high density polyethylene composites
- (2020) Praveen Jeyachandran et al. Journal of the Mechanical Behavior of Biomedical Materials
- Development of organically modified montmorillonite/polypropylene composite powders for selective laser sintering
- (2020) Lisa Jiaying Tan et al. POWDER TECHNOLOGY
- Recent developments in polymers/polymer nanocomposites for additive manufacturing
- (2020) H. Wu et al. PROGRESS IN MATERIALS SCIENCE
- Ultrahigh molecular weight polyethylene: Catalysis, structure, properties, processing and applications
- (2020) Ketan Patel et al. PROGRESS IN POLYMER SCIENCE
- Influence of raster orientation on the determination of fracture properties of polypropylene thin components produced by additive manufacturing
- (2020) M. Lorenzo-Bañuelos et al. THEORETICAL AND APPLIED FRACTURE MECHANICS
- Taguchi Optimization of Parameters for Feedstock Fabrication and FDM Manufacturing of Wear-Resistant UHMWPE-Based Composites
- (2020) Yury V. Dontsov et al. Materials
- Fused Filament Fabricated Polypropylene Composite Reinforced by Aligned Glass Fibers
- (2020) Eugene Shulga et al. Materials
- Technologies in additive manufacturing for fiber reinforced composite materials: a review
- (2020) Palanikumar K. et al. Current Opinion in Chemical Engineering
- Improving the coloring of polypropylene materials for powder bed fusion by plasma surface functionalization
- (2020) Gómez Bonilla Juan S et al. Additive Manufacturing
- Bead parameterization of desktop and room-scale material extrusion additive manufacturing: How print speed and thermal properties affect heat transfer
- (2020) Tone D’Amico et al. Additive Manufacturing
- Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers
- (2020) Arit Das et al. Additive Manufacturing
- Dynamic mechanical analysis of 3D printed eco-friendly lightweight composite
- (2020) Mrityunjay Doddamani COMPOSITES COMMUNICATIONS
- Mechanical behavior of additively manufactured nanoclay/HDPE nanocomposites
- (2020) Pavan Beesetty et al. COMPOSITE STRUCTURES
- Extending Cellulose-Based Polymers Application in Additive Manufacturing Technology: A Review of Recent Approaches
- (2020) Denesh Mohan et al. Polymers
- Thermally enhanced pristine polyolefins: fundamentals, progress and prospective
- (2020) A.U. Chaudhry et al. Journal of Materials Research and Technology-JMR&T
- Process-induced morphological features in material extrusion-based additive manufacturing of polypropylene
- (2020) Sandra Petersmann et al. Additive Manufacturing
- Comparative study on the selective laser sintering of polypropylene homopolymer and copolymer: processability, crystallization kinetics, crystal phases and mechanical properties
- (2020) Lisa Jiaying Tan et al. Additive Manufacturing
- Fused filament fabrication of polymer materials: A review of interlayer bond
- (2020) Xia Gao et al. Additive Manufacturing
- Three-Dimensional Printed Lightweight Composite Foams
- (2020) Bharath H S et al. ACS Omega
- Facile and scalable fabrication of highly thermal conductive polyethylene/graphene nanocomposites by combining solid-state shear milling and FDM 3D-printing aligning methods
- (2020) Jingjing Jing et al. CHEMICAL ENGINEERING JOURNAL
- Sustainable Additive Manufacturing: Mechanical Response of Polypropylene over Multiple Recycling Processes
- (2020) Nectarios Vidakis et al. Sustainability
- Reinforcing polypropylene with graphene-polylactic acid microcapsules for fused-filament fabrication
- (2020) C. Aumnate et al. MATERIALS & DESIGN
- Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid
- (2020) Andrea Costanzo et al. Additive Manufacturing
- Phase-Change Materials/HDPE Composite Filament: A First Step Toward Use With 3D Printing for Thermal Management Applications
- (2019) Thomas B. Freeman et al. Journal of Thermal Science and Engineering Applications
- 3D-Printable PP/SEBS Thermoplastic Elastomeric Blends: Preparation and Properties
- (2019) Shib Banerjee et al. Polymers
- Effect of Ultrasonic Vibration on Interlayer Adhesion in Fused Filament Fabrication 3D Printed ABS
- (2019) Alireza Tofangchi et al. Polymers
- A Review of the Process Physics and Material Screening Methods for Polymer Powder Bed Fusion Additive Manufacturing
- (2019) Camden A. Chatham et al. PROGRESS IN POLYMER SCIENCE
- Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
- (2019) Carmen M. González-Henríquez et al. PROGRESS IN POLYMER SCIENCE
- Shape memory effect of three-dimensional printed products based on polypropylene/nylon 6 alloy
- (2019) Xiaodong Peng et al. JOURNAL OF MATERIALS SCIENCE
- Additive Manufacturing of Three-Phase Syntactic Foams Containing Glass Microballoons and Air Pores
- (2019) Ashish Kumar Singh et al. JOM
- Structure, as well as the Tribological and Mechanical Properties, of Extrudable Polymer-Polymeriс UHMWPE Composites for 3D Printing
- (2019) S. V. Panin et al. Journal of Friction and Wear
- Semi‐Crystalline Polymer Blends for Material Extrusion Additive Manufacturing Printability: A Case Study with Poly(ethylene terephthalate) and Polypropylene
- (2019) Camden A. Chatham et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Preparation of Polypropylene Powder by Dissolution-Precipitation Method for Selective Laser Sintering
- (2019) Liang Fang et al. ADVANCES IN POLYMER TECHNOLOGY
- Polypropylene–clay micro/nanocomposites as fused deposition modeling filament: effect of polypropylene-g-maleic anhydride and organo-nanoclay as chemical and physical compatibilizers
- (2019) Masoud Salavati et al. IRANIAN POLYMER JOURNAL
- Mechanical Recycling of Low-Density Polyethylene/Carbon Nanotube Composites and Its Effect on Material Properties
- (2019) Felicia Stan et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- On investigation of rheological, mechanical and morphological characteristics of waste polymer-based feedstock filament for 3D printing applications
- (2019) Sudhir Kumar et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- On secondary recycling of ZrO2-reinforced HDPE filament prepared from domestic waste for possible 3-D printing of bearings
- (2019) Rupinder Singh et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties
- (2019) Valentina Mazzanti et al. Polymers
- Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective
- (2019) Amy M. Peterson Additive Manufacturing
- In Situ Time-Resolved X-ray Scattering Study of Isotactic Polypropylene in Additive Manufacturing
- (2019) Yuval Shmueli et al. ACS Applied Materials & Interfaces
- Rheological survey of carbon fiber-reinforced high-temperature thermoplastics for big area additive manufacturing tooling applications
- (2019) Christine Ajinjeru et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Tuning the material properties of a water-soluble ionic polymer using different counterions for material extrusion additive manufacturing
- (2019) Callie E. Zawaski et al. POLYMER
- Improving the forming quality of fused filament fabrication parts by applied vibration
- (2019) Shijie Jiang et al. RAPID PROTOTYPING JOURNAL
- A review on fibre reinforced composite printing via FFF
- (2019) Isaac Ferreira et al. RAPID PROTOTYPING JOURNAL
- Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing
- (2019) Martin Spoerk et al. Polymers
- 3D printing of high density polyethylene by fused filament fabrication
- (2019) Carl G. Schirmeister et al. Additive Manufacturing
- Highly Loaded Fiber Filled Polymers for Material Extrusion: A Review of Current Understanding
- (2019) Jacob J. Fallon et al. Additive Manufacturing
- Recycled Cellulose Polypropylene Composite Feedstocks for Material Extrusion Additive Manufacturing
- (2019) Nicole E. Zander et al. ACS Omega
- Manufacturing of polymer/metal composites by fused deposition modeling process with polyethylene
- (2019) Mojtaba Nabipour et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Material extrusion‐based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage
- (2019) Martin Spoerk et al. JOURNAL OF APPLIED POLYMER SCIENCE
- Preparation and characterization of thermally stable ABS/HDPE blend for fused filament fabrication
- (2019) Muhammad Harris et al. MATERIALS AND MANUFACTURING PROCESSES
- A fundamental rule: Determining the importance of flow prior to polymer crystallization
- (2019) Claire McIlroy PHYSICS OF FLUIDS
- Reinforced and toughened PP/PS composites prepared by Fused Filament Fabrication (FFF) with in-situ microfibril and shish-kebab structure
- (2019) Yixin Jiang et al. POLYMER
- Advances in 3D printing of thermoplastic polymer composites and nanocomposites
- (2019) Arnaldo D. Valino et al. PROGRESS IN POLYMER SCIENCE
- Preliminary Characterization of Novel LDPE-Based Wear-Resistant Composite Suitable for FDM 3D Printing
- (2019) Piotr Olesik et al. Materials
- Characterisation of UHMWPE Polymer Powder for Laser Sintering
- (2019) Yas Khalil et al. Materials
- Embedding Ultra-High-Molecular-Weight Polyethylene Fibers in 3D-Printed Polylactic Acid (PLA) Parts
- (2019) Amza et al. Polymers
- Generation of Polyphenylene Sulfide Reinforced with a Thermotropic Liquid Crystalline Polymer for Application in Fused Filament Fabrication
- (2019) Mubashir Q. Ansari et al. Additive Manufacturing
- Characteristics of HDPE/cardboard dust 3D printable composite filaments
- (2019) Diana Gregor-Svetec et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Structure Development in Polymers during Fused Filament Fabrication (FFF): An in Situ Small- and Wide-Angle X-ray Scattering Study Using Synchrotron Radiation
- (2019) Aurora Nogales et al. MACROMOLECULES
- Acrylonitrile Butadiene Styrene and Polypropylene Blend with Enhanced Thermal and Mechanical Properties for Fused Filament Fabrication
- (2019) Muhammad Harris et al. Materials
- Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing
- (2019) Sunil Bhandari et al. Additive Manufacturing
- Fabrication of low dielectric constant composite filaments for use in fused filament fabrication 3D printing
- (2019) Paul Parsons et al. Additive Manufacturing
- Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
- (2018) Martin Spoerk et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene
- (2018) David Stoof et al. COMPOSITES PART B-ENGINEERING
- Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
- (2018) Tuan D. Ngo et al. COMPOSITES PART B-ENGINEERING
- Polypropylene/Cellulose Composites for Material Extrusion Additive Manufacturing
- (2018) Baris Kaynak et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Correlating molecular and crystallization dynamics to macroscopic fusion and thermodynamic stability in fused deposition modeling; a model study on polylactides
- (2018) Varun Srinivas et al. POLYMER
- Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing
- (2018) Kevin R. Hart et al. POLYMER
- A novel extrusion process for the production of polymer micropellets
- (2018) Christian Schäfer et al. POLYMER ENGINEERING AND SCIENCE
- 3D Printable Filaments Made of Biobased Polyethylene Biocomposites
- (2018) Daniel Filgueira et al. Polymers
- Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing
- (2018) Martin Spoerk et al. Polymers
- Bio-polyethylene reinforced with thermomechanical pulp fibers: Mechanical and micromechanical characterization and its application in 3D-printing by fused deposition modelling
- (2018) Q. Tarrés et al. COMPOSITES PART B-ENGINEERING
- Thermomechanical investigations of SiC and Al2O3–reinforced HDPE
- (2018) Narinder Singh et al. JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS
- Additive Manufacturing of PE/fluorouracil/progesterone intrauterine device for endometrial and ovarian cancer treatments
- (2018) G.V. Salmoria et al. POLYMER TESTING
- On Development of Functionally Graded Material Through Fused Deposition Modelling Assisted Investment Casting from Al2O3/SiC Reinforced Waste Low Density Polyethylene
- (2018) Narinder Singh et al. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
- Additive Manufacturing: Applications and Directions in Photonics and Optoelectronics
- (2018) Andrea Camposeo et al. Advanced Optical Materials
- What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
- (2018) Chad Duty et al. Journal of Manufacturing Processes
- Production of high-performance multi-layer fine-fibrous filter material by application of material extrusion–based additive manufacturing
- (2018) V. A. Beloshenko et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The importance of rheological behavior in the additive manufacturing technique material extrusion
- (2018) Michael E. Mackay JOURNAL OF RHEOLOGY
- Thermal properties of spray-dried cellulose nanofibril-reinforced polypropylene composites from extrusion-based additive manufacturing
- (2018) Lu Wang et al. JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Filament Materials Screening for FDM 3D Printing by Means of Injection‐Molded Short Rods
- (2018) Minde Jin et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Mechanical and thermal properties of bamboo fiber reinforced polypropylene/polylactic acid composites for 3D printing
- (2018) Haibo Long et al. POLYMER ENGINEERING AND SCIENCE
- Additive Manufacturing of Polypropylene: A Screening Design of Experiment Using Laser-Based Powder Bed Fusion
- (2018) Iñigo Flores Ituarte et al. Polymers
- Recent Progress in Additive Manufacturing of Fiber Reinforced Polymer Composite
- (2018) Guo Dong Goh et al. Advanced Materials Technologies
- Preparation of polypropylene/short glass fiber composite as Fused Deposition Modeling (FDM) filament
- (2018) Gholamhossein Sodeifian et al. Results in Physics
- Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents
- (2017) K. Wudy et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Structural Evolution of PCL during Melt Extrusion 3D Printing
- (2017) Fengyuan Liu et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
- (2017) Martin Spoerk et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
- (2017) Lu Wang et al. POLYMER
- Model analysis of feedstock behavior in fused filament fabrication: Enabling rapid materials screening
- (2017) Eric L. Gilmer et al. POLYMER
- Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing
- (2017) C. McIlroy et al. POLYMER
- Optimization of mechanical properties of glass-spheres-filled polypropylene composites for extrusion-based additive manufacturing
- (2017) Martin Spoerk et al. POLYMER COMPOSITES
- Cellulose nanofibril-reinforced polypropylene composites for material extrusion: Rheological properties
- (2017) Lu Wang et al. POLYMER ENGINEERING AND SCIENCE
- Deposition-induced effects of isotactic polypropylene and polycarbonate composites during fused deposition modeling
- (2017) Ying-Guo Zhou et al. RAPID PROTOTYPING JOURNAL
- 3D-Printing of Meso-structurally Ordered Carbon Fiber/Polymer Composites with Unprecedented Orthotropic Physical Properties
- (2017) James P. Lewicki et al. Scientific Reports
- Cranial Polypropylene Implants by Fused Filament Fabrication
- (2016) Matthias Katschnig et al. ADVANCED ENGINEERING MATERIALS
- The Effects of Iron, Silicon, Chromium, and Aluminum Additions on the Physical and Mechanical Properties of Recycled 3D Printing Filaments
- (2016) Guan-Ting Pan et al. ADVANCES IN POLYMER TECHNOLOGY
- Production of spherical wax and polyolefin microparticles by melt emulsification for additive manufacturing
- (2016) Stephanie Fanselow et al. CHEMICAL ENGINEERING SCIENCE
- 3D-printing technologies for electrochemical applications
- (2016) Adriano Ambrosi et al. CHEMICAL SOCIETY REVIEWS
- Conductive polyolefin–rubber nanocomposites with carbon nanotubes
- (2016) Fugen Daver et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- Interface and performance of 3D printed continuous carbon fiber reinforced PLA composites
- (2016) Xiaoyong Tian et al. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
- 3D printing with polymers: Challenges among expanding options and opportunities
- (2016) Jeffrey W. Stansbury et al. DENTAL MATERIALS
- Preparation of polypropylene microspheres for selective laser sintering via thermal-induced phase separation: Roles of liquid-liquid phase separation and crystallization
- (2016) Shao-Jie Wang et al. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS
- Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material
- (2016) Siewhui Chong et al. JOURNAL OF POLYMERS AND THE ENVIRONMENT
- Mobile amorphous, rigid amorphous and crystalline fractions in isotactic polypropylene during fast cooling
- (2016) Jürgen E. K. Schawe JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
- Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion
- (2016) Sebastian Hertle et al. MACROMOLECULAR MATERIALS AND ENGINEERING
- The effect of processing conditions on the mechanical properties of polyethylene produced by selective laser sintering
- (2016) Jiaming Bai et al. POLYMER TESTING
- The status, challenges, and future of additive manufacturing in engineering
- (2015) Wei Gao et al. COMPUTER-AIDED DESIGN
- 3D Printing technologies for drug delivery: a review
- (2015) Leena Kumari Prasad et al. DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY
- Experimental analysis of an extrusion system for additive manufacturing based on polymer pellets
- (2015) N. Volpato et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Investigation into mechanical and microstructural properties of polypropylene manufactured by selective laser sintering in comparison with injection molding counterparts
- (2015) Wei Zhu et al. MATERIALS & DESIGN
- Fused deposition modeling with polypropylene
- (2015) O.S. Carneiro et al. MATERIALS & DESIGN
- Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations
- (2014) Yong Huang et al. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME
- Materials perspective of polymers for additive manufacturing with selective laser sintering
- (2014) Manfred Schmid et al. JOURNAL OF MATERIALS RESEARCH
- Functional graded scaffold of HDPE/HA prepared by selective laser sintering: microstructure and mechanical properties
- (2012) Gean V. Salmoria et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Quantification of non-isothermal, multi-phase crystallization of isotactic polypropylene: The influence of shear and pressure
- (2012) Tim B. van Erp et al. POLYMER
- An empirical study into laser sintering of ultra-high molecular weight polyethylene (UHMWPE)
- (2009) Ruth D. Goodridge et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Comparison of viscous and elastic properties of polyolefin melts in shear and elongation
- (2009) Friedrich Wolff et al. RHEOLOGICA ACTA
- In vitrobiocompatibility of hydroxyapatite-reinforced polymeric composites manufactured by selective laser sintering
- (2008) Y. Zhang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
- Trends in Polyolefin Chemistry
- (2008) Walter Kaminsky MACROMOLECULAR CHEMISTRY AND PHYSICS
- Characterization and dynamic mechanical analysis of selective laser sintered hydroxyapatite‐filled polymeric composites
- (2007) Y. Zhang et al. JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
Find the ideal target journal for your manuscript
Explore over 38,000 international journals covering a vast array of academic fields.
SearchBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started