Novel strength-electrical conductivity synergy in Cu-based composites reinforced with TiZrNbTa high entropy alloy

Phase-tunable equiatomic and non-equiatomic Ti-Zr-Nb-Ta high-entropy alloys with ultrahigh strength for metallic biomaterials

(2022) Tao Xiang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Improved strength and conductivity of metallic-glass-reinforced nanocrystalline CuCrZr alloy

(2022) Weizong Bao et al.   MATERIALS & DESIGN

Achieving high strength and high conductivity of bulk metallic glass composites by controlled milling process

(2022) Jie Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Optimizing mechanical and electrical properties of Cu-coated Cu–Zr–Al bulk metallic glass composites by adjusting glassy powder size

(2022) Guoqiang Xie et al.   INTERMETALLICS

Optimized strength and conductivity of multi-scale copper alloy/metallic glass composites tuned by a one-step spark plasma sintering (SPS) process

(2022) Weizong Bao et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Properties and precipitates of the high strength and electrical conductivity Cu-Ni-Co-Si-Cr alloy

(2021) Yijie Ban et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

CoTi precipitates: The key to high strength, high conductivity and good softening resistance in Cu-Co-Ti alloy

(2021) Huiya Yang et al.   MATERIALS CHARACTERIZATION

High strength conductive bulk Cu-based alloy/metallic glass composites fabricated by spark plasma sintering

(2021) Weizong Bao et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Strengthening mechanisms and modelling of mechanical properties of submicron-TiB2 particulate reinforced Al 7075 metal matrix composites

(2021) Barada Prasanna Sahoo et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

On the interactions between molten aluminum and high entropy alloy particles during aluminum matrix composite processing

(2021) Xuejun Huang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Dual phase equal-atomic NbTaTiZr high-entropy alloy with ultra-fine grain and excellent mechanical properties fabricated by spark plasma sintering

(2021) Tao Xiang et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Bulk metallic glass composites with high strength and electrical conductivity by sintering Cu-coated CuZrAl glassy powder

(2020) Zhiwei Huang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Effects of AlCoCrFeNiTi high-entropy alloy on microstructure and mechanical properties of pure aluminum

(2020) Qinglin Li et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure and mechanical properties of ultra-fine grained MoNbTaTiV refractory high-entropy alloy fabricated by spark plasma sintering

(2019) Qing Liu et al.   JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY

Microstructure and Mechanical Properties of (TiZrHf)50(NiCoCu)50 High Entropy Alloys

(2019) Chih-Hsuan Chen et al.   METALS AND MATERIALS INTERNATIONAL

Microstructure evolution and properties of a quaternary Cu–Ni–Co–Si alloy with high strength and conductivity

(2019) Jiang Li et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Spinodal Decomposition and Mechanical Response of a TiZrNbTa High-Entropy Alloy

(2019) Liu et al.   Materials

Simultaneous achievement of high strength, excellent ductility, and good electrical conductivity in carbon nanotube/copper composites

(2018) Ping Yang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Formation of transition layer and its effect on mechanical properties of AlCoCrFeNi high-entropy alloy/Al composites

(2018) Yunzi Liu et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Mechanical performance of particulate-reinforced Al metal-matrix composites (MMCs) and Al metal-matrix nano-composites (MMNCs)

(2017) Chang-Soo Kim et al.   JOURNAL OF MATERIALS SCIENCE

Novel TiNbTaZrMo high-entropy alloys for metallic biomaterials

(2017) Mitsuharu Todai et al.   SCRIPTA MATERIALIA

A feasible ultrafine grained Cu matrix composite microstructure for achieving high strength and high electrical conductivity

(2016) Dengshan Zhou et al.   JOURNAL OF ALLOYS AND COMPOUNDS

In-situ fabrication and characterization of ultrafine structured Cu–TiC composites with high strength and high conductivity by mechanical milling

(2016) Fenglin Wang et al.   JOURNAL OF ALLOYS AND COMPOUNDS

The effect of reinforcement percentages on properties of copper matrix composites reinforced with TiC particles

(2016) GH.A. Bagheri   JOURNAL OF ALLOYS AND COMPOUNDS

Effect of milling parameters on sinterability, mechanical and electrical properties of Cu-4 wt.% ZrO 2 nanocomposite

(2016) Mohammed A. Taha et al.   MATERIALS CHEMISTRY AND PHYSICS

Grain refinement kinetics and strengthening mechanisms in Cu–0.3Cr–0.5Zr alloy subjected to intense plastic deformation

(2016) A.P. Zhilyaev et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Investigation on microstructure and properties of Cu–Al 2 O 3 composites fabricated by a novel in-situ reactive synthesis

(2016) Xue-Hui Zhang et al.   MATERIALS & DESIGN

Fabrication and mechanical properties of AlCoNiCrFe high-entropy alloy particle reinforced Cu matrix composites

(2015) Jian Chen et al.   JOURNAL OF ALLOYS AND COMPOUNDS

High strength and good electrical conductivity in Cu–Cr alloys processed by severe plastic deformation

(2015) S.V. Dobatkin et al.   MATERIALS LETTERS

In situ production of tantalum carbide nanodispersoids in a copper matrix by reactive milling and hot extrusion

(2014) Milton Manotas-Albor et al.   JOURNAL OF ALLOYS AND COMPOUNDS

Impact of Volume Fraction and Size of Reinforcement Particles on the Grain Size in Metal–Matrix Micro and Nanocomposites

(2014) J. B. Ferguson et al.   METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE

Strengthening effects in precipitation and dispersion hardened powder metallurgy copper alloys

(2013) J. Ružić et al.   MATERIALS & DESIGN

The Cu matrix cermets remarkably strengthened by TiB2 “in situ” synthesized via self-propagating high temperature synthesis

(2013) Marta Ziemnicka-Sylwester   MATERIALS & DESIGN

The effect of SiC particle size on the properties of Cu–SiC composites

(2011) G. Celebi Efe et al.   MATERIALS & DESIGN

Compressive and wear resistance of nanometric alumina reinforced copper matrix composites

(2011) A. Fathy et al.   MATERIALS & DESIGN

Effects of C addition and thermo-mechanical treatments on microstructures and properties of Cu–Fe–P alloys

(2011) Hyung Giun Kim et al.   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Comparison between current models for the strength of particulate-reinforced metal matrix nanocomposites with emphasis on consideration of Hall–Petch effect

(2011) A. Sanaty-Zadeh   MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Cu-based metallic glass particle additions to significantly improve overall compressive properties of an Al alloy

(2010) D.V. Dudina et al.   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING

Mechanical properties of Al-based metal matrix composites reinforced with Zr-based glassy particles produced by powder metallurgy

(2009) S. Scudino et al.   ACTA MATERIALIA

Relationship between microstructure, properties and reaction conditions for Cu–TiB2 alloys prepared by in situ reaction

(2009) Mingxing Guo et al.   ACTA MATERIALIA

The effect of particle size, sintering temperature and sintering time on the properties of Al–Al2O3 composites, made by powder metallurgy

(2009) Mehdi Rahimian et al.   JOURNAL OF MATERIALS PROCESSING TECHNOLOGY