A review of the processing, microstructure and property relationships in medium Mn steels
出版年份 2023 全文链接
标题
A review of the processing, microstructure and property relationships in medium Mn steels
作者
关键词
-
出版物
INTERNATIONAL MATERIALS REVIEWS
Volume -, Issue -, Pages 1-37
出版商
Informa UK Limited
发表日期
2023-05-12
DOI
10.1080/09506608.2023.2199617
参考文献
相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。- Effect of Intercritical Annealing Parameters and Starting Microstructure on the Microstructural Evolution and Mechanical Properties of a Medium-Mn Third Generation Advanced High Strength Steel
- (2022) Kazi M. H. Bhadhon et al. Metals
- The relative contributions of TWIP and TRIP to strength in fine grained medium-Mn steels
- (2022) T.W.J. Kwok et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Flow Stress Behaviour and Static Recrystallization Characteristics of Hot Deformed Austenite in Microalloyed Medium-Carbon Bainitic Steels
- (2021) Pentti M. Kaikkonen et al. Metals
- Hydrogen Embrittlement of Medium Mn Steels
- (2021) Lawrence Cho et al. Metals
- Influence of the Cooling Time on the Microstructural Evolution and Mechanical Performance of a Double Pulse Resistance Spot Welded Medium-Mn Steel
- (2021) Manfred Stadler et al. Metals
- Enhancement of the tensile properties and impact toughness of a medium-Mn steel through the homogeneous microstrain distribution
- (2021) Aniruddha Dutta et al. MATERIALS CHARACTERIZATION
- Austenite formation and cementite dissolution during intercritical annealing of a medium-manganese steel from a martensitic condition
- (2021) J.J. Mueller et al. MATERIALS & DESIGN
- Tempering and Austempering of Double Soaked Medium Manganese Steels
- (2021) Alexandra Glover et al. Frontiers in Materials
- New Ms-formula for exact microstructural prediction of modern 3rd generation AHSS chemistries
- (2021) Simone Kaar et al. SCRIPTA MATERIALIA
- Microstructure Evolution and Tensile Behaviour of a Cold Rolled 8 Wt Pct Mn Medium Manganese Steel
- (2021) T. W. J. Kwok et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- A Scale-up Study on Chemical Segregation and the Effects on Tensile Properties in Two Medium Mn Steel Castings
- (2021) T. W. J. Kwok et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Mechanical property development of a 0.15C–6Mn–2Al–1Si third-generation advanced high strength steel using continuous galvanizing heat treatments
- (2020) Daniella M. Pallisco et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Casting and Constitutive Hot Flow Behavior of Medium-Mn Automotive Steel with Nb as Microalloying
- (2020) Perla Julieta Cerda Vázquez et al. Metals
- Fusion Weldabilities of Advanced High Manganese Steels: A Review
- (2020) Gitae Park et al. METALS AND MATERIALS INTERNATIONAL
- Tuning austenite stability in a medium Mn steel and relationship to structure and mechanical properties
- (2020) Z. C. Li et al. MATERIALS SCIENCE AND TECHNOLOGY
- Processing and Properties of Medium-Mn TRIP Steel to Obtain a Two-Stage TRIP Behavior
- (2020) D. M. Field et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Impact of Si and Al on Microstructural Evolution and Mechanical Properties of Lean Medium Manganese Quenching and Partitioning Steels
- (2020) Simone Kaar et al. STEEL RESEARCH INTERNATIONAL
- On the Factors Governing Austenite Stability: Intrinsic versus Extrinsic
- (2020) Binbin He Materials
- The κ-Carbides in Low-Density Fe-Mn-Al-C Steels: A Review on Their Structure, Precipitation and Deformation Mechanism
- (2020) Peng Chen et al. Metals
- Role of liquid Zn and α-Fe(Zn) on liquid metal embrittlement of medium Mn steel: An ex-situ microstructural analysis of galvannealed coating during high temperature tensile test
- (2020) Siva Prasad Murugan et al. SURFACE & COATINGS TECHNOLOGY
- Effect of Prior Austenite Grain Size on Hole Expansion Ratio of Quenching and Partitioning Processed Medium-Mn Steel
- (2019) Ji Hoon Kim et al. JOM
- Fracture mechanisms and microstructure in a medium Mn quenching and partitioning steel exhibiting macrosegregation
- (2019) J. Hidalgo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effects of cold rolling reduction ratio on microstructures and tensile properties of intercritically annealed medium-Mn steels
- (2019) Min Tae Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A comparison of cross-tension properties and fracture behavior between similar and dissimilar resistance spot-weldments in medium-Mn TRIP steel
- (2019) Gitae Park et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- A medium-Mn steel processed by novel twin-roll strip casting route
- (2019) Hesong Wang et al. MATERIALS SCIENCE AND TECHNOLOGY
- Analysis of Hot- and Cold-Rolled Loads in Medium-Mn TRIP Steels
- (2019) M. F. Buchely et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- Macro-to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: role of the austenite-ferrite interface
- (2019) Binhan Sun et al. ACTA MATERIALIA
- Processing Variants in Medium-Mn Steels
- (2019) John Speer et al. Metals
- Deformation Behavior of a Double Soaked Medium Manganese Steel with Varied Martensite Strength
- (2019) Alexandra Glover et al. Metals
- Computer-Aided Material Design for Crash Boxes Made of High Manganese Steels
- (2019) Angela Quadfasel et al. Metals
- Super-high-strength and formable medium Mn steel manufactured by warm rolling process
- (2019) Bin Hu et al. ACTA MATERIALIA
- Hadfield manganese austenitic steel: a review of manufacturing processes and properties
- (2019) Masoud Sabzi et al. Materials Research Express
- Remarkable improvement in resistance spot weldability of medium-Mn TRIP steel by paint-baking heat treatment
- (2019) Gitae Park et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Special issue on ‘Medium manganese steels’
- (2019) Radhakanta Rana MATERIALS SCIENCE AND TECHNOLOGY
- The Influence of Microstructure on the Mechanical Properties and Fracture Behavior of Medium Mn Steels at Different Strain Rates
- (2019) Zheng Wang et al. Materials
- Novel medium-Mn (austenite + martensite) duplex hot-rolled steel achieving 1.6 GPa strength with 20 % ductility by Mn-segregation-induced TRIP mechanism
- (2018) Hyungsoo Lee et al. ACTA MATERIALIA
- The influence of silicon additions on the deformation behavior of austenite-ferrite duplex medium manganese steels
- (2018) Binhan Sun et al. ACTA MATERIALIA
- Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel
- (2018) Ran Ding et al. ACTA MATERIALIA
- Twinning-induced plasticity (TWIP) steels
- (2018) Bruno C. De Cooman et al. ACTA MATERIALIA
- Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals
- (2018) R. Elliott et al. JOM
- Improved microstructural homogeneity and mechanical property of medium manganese steel with Mn segregation banding by alternating lath matrix
- (2018) Juhua Liang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of quenching temperature on stretch flangeability of a medium Mn steel processed by quenching and partitioning
- (2018) Ji Hoon Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Improvement of tensile properties in (austenite+ferrite+κ-carbide) triplex hot-rolled lightweight steels
- (2018) Hyejin Song et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Simultaneous Increase of Both Strength and Ductility of Medium Mn Transformation-Induced Plasticity Steel by Vanadium Alloying
- (2018) B. B. He et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Selective Oxidation of a 0.1C-6Mn-2Si Third Generation Advanced High-Strength Steel During Dew-Point Controlled Annealing
- (2018) Maedeh Pourmajidian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Chemistry and Properties of Medium-Mn Two-Stage TRIP Steels
- (2018) Daniel M. Field et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Dynamic Strain Aging Phenomena and Tensile Response of Medium-Mn TRIP Steel
- (2018) Daniel M. Field et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- An ultrahigh strength and enhanced ductility cold-rolled medium-Mn steel treated by intercritical annealing
- (2018) Xuan Li et al. SCRIPTA MATERIALIA
- Microstructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel
- (2018) Qiang Jia et al. Metals
- Strong and ductile medium Mn steel without transformation-induced plasticity effect
- (2018) B. B. He et al. Materials Research Letters
- Liquid metal embrittlement in laser lap joining of TWIP and medium-manganese TRIP steel: The role of stress and grain boundaries
- (2018) M.H. Razmpoosh et al. MATERIALS CHARACTERIZATION
- Effect of Process Atmosphere Dew Point and Tin Addition on Oxide Morphology and Growth for a Medium-Mn Third Generation Advanced Steel During Intercritical Annealing
- (2018) Maedeh Pourmajidian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- The influence of microstructural characteristics on yield point elongation phenomenon in Fe-0.2C-11Mn-2Al steel
- (2018) Z.H. Cai et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- 1.0 GPa low carbon medium Mn heavy steel plate with excellent ductility
- (2018) Jun Chen et al. MATERIALS SCIENCE AND TECHNOLOGY
- On the reactive wetting of a medium-Mn advanced high-strength steel during continuous galvanizing
- (2018) Maedeh Pourmajidian et al. SURFACE & COATINGS TECHNOLOGY
- Microstructural evolution and tensile properties of 70 GPa·% grade strong and ductile hot-rolled 6Mn steel treated by intercritical annealing
- (2018) Jiajia Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Martensite to austenite reversion in a high-Mn steel: Partitioning-dependent two-stage kinetics revealed by atom probe tomography, in-situ magnetic measurements and simulation
- (2018) I.R. Souza Filho et al. ACTA MATERIALIA
- Revealing fracture mechanisms of medium manganese steels with and without delta-ferrite
- (2018) Binhan Sun et al. ACTA MATERIALIA
- Crucial microstructural feature to determine the impact toughness of intercritically annealed medium-Mn steel with triplex-phase microstructure
- (2018) Min Tae Kim et al. ACTA MATERIALIA
- A strong and ductile 7Mn steel manufactured by warm rolling and exhibiting both transformation and twinning induced plasticity
- (2017) Bin Hu et al. JOURNAL OF ALLOYS AND COMPOUNDS
- Characterization of fracture in medium Mn steel
- (2017) Hongki Choi et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructure and mechanical properties of hot-rolled medium-Mn steel containing 3% aluminum
- (2017) Chengwei Shao et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Coincidence of strain-induced TRIP and propagative PLC bands in Medium Mn steels
- (2017) Michael Callahan et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Microstructures and mechanical properties of Ti and Mo micro-alloyed medium Mn steel
- (2017) Dongyeol Lee et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Correlation between deformation behavior and austenite characteristics in a Mn-Al type TRIP steel
- (2017) Y.B. Xu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation behavior in cold-rolled medium-manganese TRIP steel and effect of pre-strain on the Lüders bands
- (2017) Z.C. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- High strength-toughness combination of a low-carbon medium-manganese steel plate with laminated microstructure and retained austenite
- (2017) Y. Zou et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Medium-manganese steels processed by austenite-reverted-transformation annealing for automotive applications
- (2017) Yan Ma MATERIALS SCIENCE AND TECHNOLOGY
- On the Prediction of α-Martensite Temperatures in Medium Manganese Steels
- (2017) Daniel M. Field et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Surface Selective Oxide Reduction During the Intercritical Annealing of Medium Mn Steel
- (2017) Kyoung Rae Jo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Influence of Temperature and Grain Size on Austenite Stability in Medium Manganese Steels
- (2017) Yulong Zhang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Current state of Fe-Mn-Al-C low density steels
- (2017) Shangping Chen et al. PROGRESS IN MATERIALS SCIENCE
- Critical role of strain partitioning and deformation twinning on cracking phenomenon occurring during cold rolling of two duplex medium manganese steels
- (2017) Binhan Sun et al. SCRIPTA MATERIALIA
- Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel
- (2017) Binhan Sun et al. SCRIPTA MATERIALIA
- Medium Mn transformation-induced plasticity steels: Recent progress and challenges
- (2017) Dong-Woo Suh et al. SCRIPTA MATERIALIA
- Microstructure evolution and enhanced performance of a novel Nb-Mo microalloyed medium Mn alloy fabricated by low-temperature rolling and warm stamping
- (2017) H.J. Pan et al. MATERIALS & DESIGN
- Dramatic improvement of strain hardening and ductility to 95% in highly-deformable high-strength duplex lightweight steels
- (2017) Seok Su Sohn et al. Scientific Reports
- Spectral TRIP enables ductile 1.1 GPa martensite
- (2016) M.-M. Wang et al. ACTA MATERIALIA
- Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+TRIP steel
- (2016) Marat I. Latypov et al. ACTA MATERIALIA
- Experimental investigation on a novel medium Mn steel combining transformation-induced plasticity and twinning-induced plasticity effects
- (2016) B.B. He et al. INTERNATIONAL JOURNAL OF PLASTICITY
- Mechanical properties and deformation behavior in hot-rolled 0.2C-1.5/3Al-8.5Mn-Fe TRIP steel: The discontinuous TRIP effect
- (2016) Z.C. Li et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel
- (2016) Jin-Kyung Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Atomistic study of nano-sized κ-carbide formation and its interaction with dislocations in a cast Si added FeMnAlC lightweight steel
- (2016) C.W. Kim et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Critical assessment 19: stacking fault energies of austenitic steels
- (2016) Y.-K. Lee et al. MATERIALS SCIENCE AND TECHNOLOGY
- Zn Penetration in Liquid Metal Embrittled TWIP Steel
- (2016) Heeseung Kang et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Combined Intercritical Annealing and Q&P Processing of Medium Mn Steel
- (2016) Bruno C. De Cooman et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Deformation Microstructure and Deformation-Induced Martensite in Austenitic Fe-Cr-Ni Alloys Depending on Stacking Fault Energy
- (2016) Ye Tian et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis of the Tensile Behavior of 12 pct Mn Multi-phase (α + γ) TWIP + TRIP Steel by Neutron Diffraction
- (2016) Sangwon Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Improvement of Castability and Surface Quality of Continuously Cast TWIP Slabs by Molten Mold Flux Feeding Technology
- (2016) Jung-Wook Cho et al. METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE
- The effect of grain size on the twin initiation stress in a TWIP steel
- (2015) K.M. Rahman et al. ACTA MATERIALIA
- Role of stress-assisted martensite in the design of strong ultrafine-grained duplex steels
- (2015) Hung-Wei Yen et al. ACTA MATERIALIA
- Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content
- (2015) Z.H. Cai et al. ACTA MATERIALIA
- Structure and properties of κ-carbides in duplex lightweight steels
- (2015) W. J. Lu et al. IRONMAKING & STEELMAKING
- Precipitation and dissolution behavior of κ-carbide during continuous heating in Fe-9.3Mn-5.6Al-0.16C lightweight steel
- (2015) Sukjin Lee et al. JOURNAL OF ALLOYS AND COMPOUNDS
- New ultrahigh-strength Mn-alloyed TRIP steels with improved formability manufactured by intercritical annealing
- (2015) Haiwen Luo et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of microstructure on retained austenite stability and tensile behaviour in an aluminum-alloyed TRIP steel
- (2015) J. Chiang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Phase transformation of the L1 2 phase to kappa-carbide after spinodal decomposition and ordering in an Fe–C–Mn–Al austenitic steel
- (2015) Wei-Chun Cheng et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Structure–mechanical property relationship in a low-C medium-Mn ultrahigh strength heavy plate steel with austenite-martensite submicro-laminate structure
- (2015) J. Hu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Kinetics of Solute Partitioning During Intercritical Annealing of a Medium-Mn Steel
- (2015) H. Kamoutsi et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Observation of the TWIP + TRIP Plasticity-Enhancement Mechanism in Al-Added 6 Wt Pct Medium Mn Steel
- (2015) Seawoong Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Tensile Behavior of Intercritically Annealed Ultra-Fine Grained 8% Mn Multi-Phase Steel
- (2015) Sangwon Lee et al. STEEL RESEARCH INTERNATIONAL
- Effect of intercritical annealing on the Lüders strains of medium Mn transformation-induced plasticity steels
- (2015) Haiwen Luo et al. MATERIALS & DESIGN
- The effects of the initial martensite microstructure on the microstructure and tensile properties of intercritically annealed Fe–9Mn–0.05C steel
- (2014) Jeongho Han et al. ACTA MATERIALIA
- Novel ferrite–austenite duplex lightweight steel with 77% ductility by transformation induced plasticity and twinning induced plasticity mechanisms
- (2014) Seok Su Sohn et al. ACTA MATERIALIA
- Microstructural Developments and Tensile Properties of Lean Fe-Mn-Al-C Lightweight Steels
- (2014) S. S. Sohn et al. JOM
- High strength and ductile low density austenitic FeMnAlC steels: Simplex and alloys strengthened by nanoscale ordered carbides
- (2014) I. Gutierrez-Urrutia et al. MATERIALS SCIENCE AND TECHNOLOGY
- Current opinion in medium manganese steel
- (2014) Y.-K. Lee et al. MATERIALS SCIENCE AND TECHNOLOGY
- Analysis of the Plasticity-Enhancing Mechanisms in 12 pctMn Austeno-ferritic Steel by In Situ Neutron Diffraction
- (2014) Sangwon Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Effects of Mn Addition on Tensile and Charpy Impact Properties in Austenitic Fe-Mn-C-Al-Based Steels for Cryogenic Applications
- (2014) Junghoon Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel
- (2014) Sangwon Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Quantitative assessment of the effects of microstructure on the stability of retained austenite in TRIP steels
- (2013) S. Zhang et al. ACTA MATERIALIA
- Difference in transformation behavior between ferrite and austenite formations in medium manganese steel
- (2013) N. Nakada et al. ACTA MATERIALIA
- Microstructural evolution and strain hardening behavior during plastic deformation of Fe–12Mn–8Al–0.8C steel
- (2013) Zhi Qiang Wu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Intercritical rolling induced ultrafine microstructure and excellent mechanical properties of the medium-Mn steel
- (2013) R. Zhang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Tensile Behavior of Intercritically Annealed 10 pct Mn Multi-phase Steel
- (2013) Sangwon Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Constitutive Modeling of the Mechanical Properties of V-added Medium Manganese TRIP Steel
- (2013) Seawoong Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Failure during Sheared Edge Stretching of Dual-Phase Steels
- (2013) B. S. Levy et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Critical review of automotive steels spot welding: process, structure and properties
- (2013) M Pouranvari et al. SCIENCE AND TECHNOLOGY OF WELDING AND JOINING
- Twinning and martensite in a 304 austenitic stainless steel
- (2012) Y.F. Shen et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Deformation microstructures and strengthening mechanisms of an ultrafine grained duplex medium-Mn steel
- (2012) Chang Wang et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Influence of Silicon in Low Density Fe-C-Mn-Al Steel
- (2012) Yoon-Uk Heo et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Liquid zinc embrittlement of twinning-induced plasticity steel
- (2012) Coline Beal et al. SCRIPTA MATERIALIA
- The effect of morphology on the stability of retained austenite in a quenched and partitioned steel
- (2012) X.C. Xiong et al. SCRIPTA MATERIALIA
- Wetting and reactive wetting during hot-dip galvanizing of high Mn alloyed steel with Zn–Al–Mg baths
- (2012) Marc Blumenau et al. SURFACE & COATINGS TECHNOLOGY
- Experimental and numerical analysis on formation of stable austenite during the intercritical annealing of 5Mn steel
- (2011) Haiwen Luo et al. ACTA MATERIALIA
- Reactive wetting of high Mn steels during continuous hot-dip galvanizing
- (2011) S. Alibeigi et al. ACTA MATERIALIA
- Design of a novel Mn-based 1GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability
- (2011) C. Herrera et al. ACTA MATERIALIA
- High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
- (2011) O. Bouaziz et al. CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE
- Role of microalloying elements in the microstructure of hot rolled steels
- (2011) Manuel Gómez et al. International Journal of Materials Research
- TiC precipitation induced effect on microstructure and mechanical properties in low carbon medium manganese steel
- (2011) Y. Han et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel
- (2011) P. J. Gibbs et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel
- (2011) Seawoong Lee et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Analysis of Microstructure Evolution in Quenching and Partitioning Automotive Sheet Steel
- (2011) John G. Speer et al. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
- Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning
- (2011) Seawoong Lee et al. SCRIPTA MATERIALIA
- Use of pre-oxidation to improve reactive wetting of high manganese alloyed steel during hot-dip galvanizing
- (2011) Marc Blumenau et al. SURFACE & COATINGS TECHNOLOGY
- An in situ study on austenite memory and austenitic spontaneous recrystallization of a martensitic steel
- (2010) L. Liu et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Strain partitioning and mechanical stability of retained austenite
- (2010) Joo Hyun Ryu et al. SCRIPTA MATERIALIA
- Austenite stabilization through manganese enrichment
- (2010) Emmanuel De Moor et al. SCRIPTA MATERIALIA
- Stretch-Flangeability of High Mn TWIP steel
- (2010) L. Chen et al. STEEL RESEARCH INTERNATIONAL
- Strip Casting of a High-Manganese Steel (FeMn22C0.6) Compared with a Process Chain Consisting of Ingot Casting and Hot Forming
- (2010) M. Daamen et al. STEEL RESEARCH INTERNATIONAL
- Deformation-induced martensitic transformation behavior in cold-rolled and cold-drawn type 316 stainless steels
- (2009) Nobuo Nakada et al. ACTA MATERIALIA
- Processes, microstructure and properties of vanadium microalloyed steels
- (2009) T. N. Baker MATERIALS SCIENCE AND TECHNOLOGY
- Influence of silicon on cementite precipitation in steels
- (2008) E. Kozeschnik et al. MATERIALS SCIENCE AND TECHNOLOGY
- On measurement of retained austenite in multiphase TRIP steels — results of blind round robin test involving six different techniques
- (2008) P. J. Jacques et al. MATERIALS SCIENCE AND TECHNOLOGY
- Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe–Mn–C steel
- (2007) A. Dumay et al. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
- Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels
- (2007) O. Bouaziz et al. SCRIPTA MATERIALIA
Find Funding. Review Successful Grants.
Explore over 25,000 new funding opportunities and over 6,000,000 successful grants.
ExploreDiscover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversation