标题
Progress and trend of minimum quantity lubrication (MQL): A comprehensive review
作者
关键词
-
出版物
Journal of Cleaner Production
Volume 386, Issue -, Pages 135809
出版商
Elsevier BV
发表日期
2022-12-31
DOI
10.1016/j.jclepro.2022.135809
参考文献
相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。- Comparison of machinability and economic aspects in turning of Haynes-25 alloy under novel hybrid cryogenic-LN oils-on-water approach
- (2022) Aqib Mashood Khan et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Sustainable cooling strategies to reduce tool wear, power consumption and surface roughness during ultrasonic assisted turning of Ti-6Al-4V
- (2022) Jay Airao et al. TRIBOLOGY INTERNATIONAL
- A model and its experiment using compressed cold air to clean the active surface of a grinding wheel during sharping of a hob cutter
- (2022) Wojciech Stachurski et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool wear patterns and their promoting mechanisms in hybrid cooling assisted machining of titanium Ti-3Al-2.5V/grade 9 alloy
- (2022) Munish Kumar Gupta et al. TRIBOLOGY INTERNATIONAL
- Electrostatic atomization minimum quantity lubrication machining: from mechanism to application
- (2022) Wenhao Xu et al. International Journal of Extreme Manufacturing
- Ambient air quantity and cutting performances of water-based Fe3O4 nanofluid in magnetic minimum quantity lubrication
- (2021) Tao Lv et al. The International Journal of Advanced Manufacturing Technology
- Study on vibration and surface roughness in MQCL turning of stainless steel
- (2021) Niancong Liu et al. Journal of Manufacturing Processes
- The effects of liquid-CO2 cooling, MQL and cutting parameters on drilling performance
- (2021) Luka Sterle et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process
- (2021) Munish Kumar Gupta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Optimization of MQL turning process considering the distribution and control of cutting fluid mist particles
- (2021) Niancong Liu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review on nanofluids in minimum quantity lubrication machining
- (2021) Satish Chinchanikar et al. Journal of Manufacturing Processes
- Review on design and development of cryogenic machining setups for heat resistant alloys and composites
- (2021) Navneet Khanna et al. Journal of Manufacturing Processes
- A comprehensive review on research developments of vegetable-oil based cutting fluids for sustainable machining challenges
- (2021) Sankaranarayanan R. et al. Journal of Manufacturing Processes
- Recent progress and evolution of coolant usages in conventional machining methods: a comprehensive review
- (2021) Gary Wong Ang Kui et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Cutting forces and temperature measurements in cryogenic assisted turning of AA2024-T351 alloy: An experimentally validated simulation approach
- (2021) Munish Kumar Gupta et al. MEASUREMENT
- Machining performance of Ti6Al4V under dry environment, pressurized air supply and water-MQL: analysis of machining-induced vibration signals and captured thermographs
- (2021) Sarthak Prasad Sahoo et al. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES
- Influence of hybrid Cryo-MQL lubri-cooling strategy on the machining and tribological characteristics of Inconel 718
- (2021) Mohd Danish et al. TRIBOLOGY INTERNATIONAL
- Development of a virtual sensor for the comparison of heat partitions in milling under cryogenic cooling lubrication and high-pressure cutting fluid supply
- (2021) Thorsten Augspurger et al. CIRP Journal of Manufacturing Science and Technology
- Feasibility study of oil-on-water cooling in high-speed end milling of hardened steel
- (2020) Shixiong Wu et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Evaluation of tool wear, surface roughness/topography and chip morphology when machining of Ni-based alloy 625 under MQL, cryogenic cooling and CryoMQL
- (2020) Çağrı Vakkas Yıldırım et al. Journal of Materials Research and Technology-JMR&T
- Evaluation of minimum quantity lubrication and minimum quantity cooling lubrication performance in hard drilling of Hardox 500 steel using Al2O3 nanofluid
- (2020) Tran Minh Duc et al. Advances in Mechanical Engineering
- An improved displacement ventilation system for a machining plant
- (2020) Guanqiong Wei et al. ATMOSPHERIC ENVIRONMENT
- Machinability investigations of hardened steel with biodegradable oil-based MQL spray system
- (2020) Munish Kumar Gupta et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Comparative evaluation of soybean oil–based MQL flow rates and emulsion flood cooling strategy in high-speed face milling of Inconel 718
- (2020) Anthony Chukwujekwu Okafor et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review on recent development of minimum quantity lubrication for sustainable machining
- (2020) N.N. Nor Hamran et al. JOURNAL OF CLEANER PRODUCTION
- Green Metalworking Fluids for sustainable machining applications: A review
- (2020) K.C Wickramasinghe et al. JOURNAL OF CLEANER PRODUCTION
- The effects of CryoMQL conditions on tool wear and surface integrity in hard turning of AISI 52100 bearing steel
- (2020) Hüseyin Alp Çetindağ et al. Journal of Manufacturing Processes
- Effect of cryogenic oils-on-water compared with cryogenic minimum quantity lubrication in finishing turning of 17-4PH stainless steel
- (2020) Zhiwei Lai et al. MACHINING SCIENCE AND TECHNOLOGY
- Performance evaluation of castor oil-ethanol blended coolant under minimum quantity lubrication turning of difficult-to-machine materials
- (2020) Niancong Liu et al. Journal of Manufacturing Processes
- Effects of grinding-wheel cleaning system in application of minimum quantity lubrication technique
- (2020) Rodrigo de Souza Ruzzi et al. Journal of Manufacturing Processes
- Oil mist concentration and machining characteristics of SiO2 water-based nano-lubricants in electrostatic minimum quantity lubrication-EMQL milling
- (2020) Tao Lv et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Flow characteristics of optimized hybrid cryogenic-minimum quantity lubrication cooling in machining of aerospace materials
- (2019) Ahmed Damir et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Ecological trends in machining as a key factor in sustainable production – A review
- (2019) G.M. Krolczyk et al. JOURNAL OF CLEANER PRODUCTION
- Comparison between sustainable cryogenic techniques and nano-MQL cooling mode in turning of nickel-based alloy
- (2019) Chetan et al. JOURNAL OF CLEANER PRODUCTION
- Spraying parameter optimization and microtopography evaluation in nanofluid minimum quantity lubrication grinding
- (2019) Xianpeng Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Performance Evaluation of MQCL Hard Milling of SKD 11 Tool Steel Using MoS2 Nanofluid
- (2019) Pham Quang Dong et al. Metals
- Effect of cutting fluids applied in MQCL mode on machinability of Ti-6Al-4V
- (2019) Nitesh Anand et al. Journal of Manufacturing Processes
- Experimental comparison of the performance of nanofluids, cryogenic and hybrid cooling in turning of Inconel 625
- (2019) Çağrı Vakkas Yıldırım TRIBOLOGY INTERNATIONAL
- Ecological and Health Effects of Lubricant Oils Emitted into the Environment
- (2019) Paulina Nowak et al. International Journal of Environmental Research and Public Health
- A novel cryogenic machining concept based on a lubricated liquid carbon dioxide
- (2019) Damir Grguraš et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- An investigation of carbon nanofluid minimum quantity lubrication for grinding unidirectional carbon fibre-reinforced ceramic matrix composites
- (2019) Shuoshuo Qu et al. JOURNAL OF CLEANER PRODUCTION
- Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing
- (2019) Binayak Sen et al. International Journal of Precision Engineering and Manufacturing-Green Technology
- Agglomeration mechanism and restraint measures of SiO2 nanoparticles in meta-aramid fibers doping modification via molecular dynamics simulations
- (2019) Chao Tang et al. NANOTECHNOLOGY
- Experimental study on chip deformation of Ti-6Al-4V titanium alloy in cryogenic cutting
- (2018) Wei Zhao et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Temperature field model and experimental verification on cryogenic air nanofluid minimum quantity lubrication grinding
- (2018) Jianchao Zhang et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Spectral analysis and power spectral density evaluation in Al2O3 nanofluid minimum quantity lubrication milling of 45 steel
- (2018) Qingan Yin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Influence of the condition of the surface layer of a hob cutter sharpened using the MQL-CCA hybrid method of coolant provision on its operational wear
- (2018) Wojciech Stachurski et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Improving machining performance of Ti-6Al-4V through multi-point minimum quantity lubrication method
- (2018) Nilanjan Banerjee et al. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
- Investigation of machinability in turning of difficult-to-cut materials using a new cryogenic cooling approach
- (2018) Amin Bagherzadeh et al. TRIBOLOGY INTERNATIONAL
- Application of minimum quantity lubrication techniques in machining process of titanium alloy for sustainability: a review
- (2018) Khaled Ali Osman et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Hard machining performance of indigenously developed green cutting fluid using flood cooling and minimum quantity cutting fluid
- (2018) Kishor Kumar Gajrani et al. JOURNAL OF CLEANER PRODUCTION
- Parameter optimization during minimum quantity lubrication milling of TC4 alloy with graphene-dispersed vegetable-oil-based cutting fluid
- (2018) Ming Li et al. JOURNAL OF CLEANER PRODUCTION
- Minimum quantity lubrication advantages when applied to insert flank face in milling
- (2017) Sana Werda et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
- (2017) B. Boswell et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil
- (2017) Benkai Li et al. JOURNAL OF CLEANER PRODUCTION
- Effect of different oil-on-water cooling conditions on tool wear in turning of compacted graphite cast iron
- (2017) Chengyong Wang et al. JOURNAL OF CLEANER PRODUCTION
- Effect of cryogenic minimum quantity lubrication on machinability of diamond tool in ultraprecision turning of 3Cr2NiMo steel
- (2017) Lai Zou et al. MATERIALS AND MANUFACTURING PROCESSES
- Simplified MQL system for drilling AISI 304 SS using cryogenically treated drills
- (2017) B. Naveena et al. MATERIALS AND MANUFACTURING PROCESSES
- Tool wear characterizations in finish turning of AISI 1045 carbon steel for MQCL conditions
- (2017) Radoslaw W. Maruda et al. WEAR
- Tool wear and surface integrity of inconel 718 in dry and cryogenic coolant at high cutting speed
- (2017) A.H. Musfirah et al. WEAR
- Hybrid lubricating/cooling strategies to reduce the tool wear in finishing turning of difficult-to-cut alloys
- (2017) S. Sartori et al. WEAR
- Cryogenic manufacturing processes
- (2016) I.S. Jawahir et al. CIRP ANNALS-MANUFACTURING TECHNOLOGY
- Potential of alternative lubrication strategies for metal cutting processes: a review
- (2016) Muhammed Nadeem Sharif et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304
- (2016) O. Pereira et al. JOURNAL OF CLEANER PRODUCTION
- Improvement of surface grinding process performance of CK45 soft steel by minimum quantity lubrication (MQL) technique using compressed cold air jet from vortex tube
- (2016) A. Saberi et al. JOURNAL OF CLEANER PRODUCTION
- Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A comprehensive review
- (2016) Anuj Kumar Sharma et al. JOURNAL OF CLEANER PRODUCTION
- Experimental study on the effect of nanoparticle concentration on the lubricating property of nanofluids for MQL grinding of Ni-based alloy
- (2016) Yanbin Zhang et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Cost evaluation on performance of a PVD coated cutting tool during end-milling of Inconel 718 under MQL conditions
- (2016) M. S. Kasim et al. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING
- Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding with different nanofluids
- (2016) Yaogang Wang et al. TRIBOLOGY INTERNATIONAL
- Effectiveness of vegetable oil based nanofluids as potential cutting fluids in turning AISI 1040 steel
- (2016) R. Padmini et al. TRIBOLOGY INTERNATIONAL
- An analysis of centrifugal MQL supply system potential in the internal cylindrical grinding process
- (2015) K. Nadolny et al. Archives of Civil and Mechanical Engineering
- Performance evaluation of nanofluid MQL with vegetable-based oil and ester oil as base fluids in turning
- (2015) Yu Su et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy
- (2015) Jules Kouam et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- Tool wear in Ti-6Al-4V alloy turning under oils on water cooling comparing with cryogenic air mixed with minimal quantity lubrication
- (2015) Haisheng Lin et al. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
- The importance of ground temperature to a liquid carbon dioxide pipeline
- (2015) ChiiJyh Teh et al. International Journal of Greenhouse Gas Control
- On the feasibility of a reduction in cutting fluid consumption via spray of biodegradable vegetable oil with compressed air in machining Inconel 706
- (2015) Ahmadreza Hosseini Tazehkandi et al. JOURNAL OF CLEANER PRODUCTION
- Optimization of environmentally benign micro-drilling process with nanofluid minimum quantity lubrication using response surface methodology and genetic algorithm
- (2015) Jung Soo Nam et al. JOURNAL OF CLEANER PRODUCTION
- Experimental evaluation of MoS2 nanoparticles in jet MQL grinding with different types of vegetable oil as base oil
- (2015) Yanbin Zhang et al. JOURNAL OF CLEANER PRODUCTION
- Multi-response optimization of minimum quantity lubrication parameters using Taguchi-based grey relational analysis in turning of difficult-to-cut alloy Haynes 25
- (2015) Murat Sarıkaya et al. JOURNAL OF CLEANER PRODUCTION
- The effect of cryogenic cooling and minimum quantity lubrication on end milling of titanium alloy Ti-6Al-4V
- (2015) Kyung-Hee Park et al. Journal of Mechanical Science and Technology
- A comparison of two minimum quantity lubrication delivery systems
- (2014) Sheri Kurgin et al. INDUSTRIAL LUBRICATION AND TRIBOLOGY
- Environmental friendly cutting fluids and cooling techniques in machining: a review
- (2014) Sujan Debnath et al. JOURNAL OF CLEANER PRODUCTION
- Development of a novel cooling system-assisted minimum quantity lubrication method for improvement of milling performance
- (2014) Jihng Kuo Ho et al. JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS
- A Review on Minimum Quantity Lubrication for Machining Processes
- (2014) Vishal S. Sharma et al. MATERIALS AND MANUFACTURING PROCESSES
- Morphology of surface generated by end milling AL6061-T6 using molybdenum disulfide (MoS2) nanolubrication in end milling machining
- (2013) Bizhan Rahmati et al. JOURNAL OF CLEANER PRODUCTION
- Investigation on the morphology of the machined surface in end milling of aerospace AL6061-T6 for novel uses of SiO2 nanolubrication system
- (2013) Mohd Sayuti et al. JOURNAL OF CLEANER PRODUCTION
- Rough turning Inconel 750 with supercritical CO2-based minimum quantity lubrication
- (2013) D.A. Stephenson et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Investigating the effects of liquid atomization and delivery parameters of minimum quantity lubrication on the grinding process of Al2O3 engineering ceramics
- (2013) M. Emami et al. Journal of Manufacturing Processes
- A review and analysis on influence of temperature and concentration of nanofluids on thermophysical properties, heat transfer and pumping power
- (2012) Ravikanth S. Vajjha et al. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
- A critical assessment of lubrication techniques in machining processes: a case for minimum quantity lubrication using vegetable oil-based lubricant
- (2012) Sunday Albert Lawal et al. JOURNAL OF CLEANER PRODUCTION
- Performance of supercritical carbon dioxide sprays as coolants and lubricants in representative metalworking operations
- (2012) S.D. Supekar et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Friction and Wear Characteristics of Water-Based ZnO and Al2O3Nanofluids
- (2012) Luan Gara et al. TRIBOLOGY TRANSACTIONS
- Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method
- (2011) M. Huseyin Cetin et al. JOURNAL OF CLEANER PRODUCTION
- Comparison of different turbulence models in predicting the temperature separation in a Ranque–Hilsch vortex tube
- (2010) T. Dutta et al. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
- Machining evaluation of a hybrid MQL-CO2 grinding technology
- (2010) J.A. Sanchez et al. JOURNAL OF CLEANER PRODUCTION
- Effects of cooling air temperature on cryogenic machining of Ti–6Al–4V alloy
- (2010) S.M. Yuan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
- Cooling techniques for improved productivity in turning
- (2009) Vishal S. Sharma et al. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
- Effects of minimum quantity lubrication on turning AISI 9310 alloy steel using vegetable oil-based cutting fluid
- (2009) M.M.A. Khan et al. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY
Discover Peeref hubs
Discuss science. Find collaborators. Network.
Join a conversationBecome a Peeref-certified reviewer
The Peeref Institute provides free reviewer training that teaches the core competencies of the academic peer review process.
Get Started